%
1 chamber: 830x1260xh180mm.Capacity: 4x 600x400 mm. Stackable oven modules, designed for medium productivity.External construction in AISI 304 stainless steel.The floor of the furnace is made of thermo diffusing steel.Height of the baking vault 180 mm.Ideally suited for baking on platters.Mould made of AISI 430 stainless steel.Heating by shielded resistors on the vault as well as under the floor of the oven.Oven door with stainless steel handle, equipped with a large safety glass.Oura for...
%
Profile frame in aluminum.Panels with double isolated walls.Lateral inspection.Ventilator with belt drive, 2 speed levels.3 double filtering.
%
Profile frame in aluminum.Panels with double isolated walls.Lateral inspection.Ventilator with belt drive, 2 speed levels.3 double filtering.
%
Compacte, mais dotée d'une grande capacité de coupe, réalisée en fusion d'alliage d'aluminium anodisé et poli.Lame en acier tempérée, chromée et rectifiée, inclinaison à 25°, anneau de protection fixe et couvre lame muni de micro-interrupteur (sécurisé à 100 %).Butée renforcée, capacité max. de coupe: 250xh185 mm (Ø 210 mm), épaisseur de 0-13 mm.Chariot sur coussinets à billes en inox, coulissement aisé et silencieux, plexiglas de protection de série.Visserie et déflecteur en acier...
%
Machine compacte mais avec une capacité de coupe importante.Lame (Ø 300 mm) en acier trempé, chromée et rectifiée, anneau de protection fixe et couvre lame muni de micro-interrupteur (sécurité à 100 %).Coulissement du chariot sur bagues autolubrifiantes et pivots rodés.Visserie en acier inox.Affûteur intégré en aluminium avec 2 émeris.Interrupteur marche/arrêt, Indice de protection IP 44.Moteur ventilé, protection inférieure, avec accès direct aux éléments électriques, bague d'étanchéité sur...
%
Lame oblique, inclinaison à 38°.Capacité max. de coupe: 230xh175 mm (Ø 200 mm), épaisseur de 0-30 mm.Espace de 41 mm, entre lame et châssis. Elégante et performante, réalisée en fusion d'alliage d'aluminium anodisé et poli.Lame en acier tempérée, chromée et rectifiée, anneau de protection fixe et couvre lame muni de micro-interrupteur (sécurisé à 100 %).Butée renforcée, protection du coulisseau de butée, amovible.Chariot sur coussinets à billes en inox, coulissement aisé et silencieux, barre...
%
Version avec lame verticale.Double chariot coulissant et munie d'un bras spécialement conçu pour la découpe des charcuteries.Course du chariot 275 mm, plateau 275xh260 mm.Epaisseur de coupe 0 - 30 mm. Formes arrondies sans recoins et sans arêtes vives et sans vis apparentes.Lame (Ø 300 mm) en acier trempé, chromée et rectifiée, anneau de protection fixe et couvre lame muni de micro-interrupteur (sécurité à 100 %).Axe de roulement du chariot chromé, rectifié et poli.Chariot sur coussinets à...
%
2 independent plates (2x 5 kW).Cupboard (GN1/1) (340x940xh360mm). Made in stainless steel AISI 304, adjustable feet in stainless steel.Top waterproof (20/10 mm) in stainless steel AISI 304.Chimney in stainless steel AISI 304.Cooking surface, watertight "IPX4".Vitroceramics induction plate, (6 mm), with 4 independent inductors underneath.Energy regulator 6 positions (each cook zone), with control lamp, frontal accessibility allowing a very easy maintenance.Principe of INDUCTION: Heat is...
%
Dimensions of the basin 240x380xh505 mm.Oil capacity, min 13 liters, max 15 liters.1 chromed basket per basin,dimensions 225x325xh125 mm. Made of 304 stainless steel, "Top" pressed thickness 15/ 10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX4".Y-shaped deep-drawn tank with rounded corners, equipped with a cold zone. Made of AISI 304 stainless steel. Drain tap (ball valve). Stainless steel cover as standard.Electric heating of the "Y" shaped tank, by radiant elements,...
%
Dimensions of the basin 240x380xh505 mm.Oil capacity, min 13 liters, max 15 liters.1 chromed basket per basin,dimensions 225x325xh125 mm. Made of 304 stainless steel, "Top" pressed thickness 15/ 10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX4".Y-shaped deep-drawn tank with rounded corners, equipped with a cold zone. Made of AISI 304 stainless steel. Drain tap (ball valve). Stainless steel cover as standard.Electric heating of the "Y" shaped tank, by radiant elements,...
%
Tank dimensions 630x510xh110 mm, surface 32,1 dm2. Deep-drawn top thickness 15/10thStainless steel tank AISI 316 "COMPOUND", with high thermal conductivityPlug and extension for discharge, supplied as standardElectrical heating: Stainless steel armoured resistors, positioned under the tank, regulation from 120°C to 300°.Safety device in case of overheatingWater protection degree IPX5Made of AISI 304 stainless steel, adjustable stainless steel feetAppliances built in compliance with current...
%
Tank dimensions 630x510xh110 mm, surface 32,1 dm2. Deep-drawn top thickness 15/10thStainless steel tank AISI 316 "COMPOUND", with high thermal conductivityPlug and extension for discharge, supplied as standardElectrical heating: Stainless steel armoured resistors, positioned under the tank, regulation from 120°C to 300°.Safety device in case of overheatingWater protection degree IPX5Made of AISI 304 stainless steel, adjustable stainless steel feetAppliances built in compliance with current...
%
Plate (770x585 mm ), with 4 cooking zones (4x 2,5 kW)Made of AISI 304 stainless steel, "Top stamped" (15/10 mm), adjustable cylindersCooking surface, waterproof "IPX4".Plate (15 mm) in "thermo-diffuser" steel, heated by resistors positioned below.Combustion chamber thermally insulated with glass wool.Control by 9-position switch (each fireplace), with indicator lightAppliances built in compliance with current standards (CE)
%
2 independent cooking zones (2x 5 kW). Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th), levelling cylinders, waterproofing "IPX5".Glass ceramic induction cookers (6 mm). Fireplace diameter 280 mm, energy regulator.INDUCTION principle: The heat is produced by a magnetic field directly inside the container, this field is created electronically, there is no heating element, which gives it a high level of safety. Cooking is done almost without any heat loss; it is the most economical...
%
2 independent cooking zones (2x 5 kW). Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th), levelling cylinders, waterproofing "IPX5".Glass ceramic induction cookers (6 mm). Fireplace diameter 280 mm, energy regulator.INDUCTION principle: The heat is produced by a magnetic field directly inside the container, this field is created electronically, there is no heating element, which gives it a high level of safety. Cooking is done almost without any heat loss; it is the most economical...
%
GN 1/1 tank, dimensions 300x520xh260 mm, capacity 40 litres. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Tank with rounded corners in AISI 316 stainless steel, equipped with an overflow for starches. Water tap for filling, drain valve (ball valve).Electrical heating by armoured resistors in stainless steel 18/10 placed outside the tank, energy regulator.Appliances built in compliance with current standards (CE)
%
GN 1/1 tank, dimensions 300x520xh260 mm, capacity 40 litres. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Tank with rounded corners in AISI 316 stainless steel, equipped with an overflow for starches. Water tap for filling, drain valve (ball valve).Electrical heating by armoured resistors in stainless steel 18/10 placed outside the tank, energy regulator.Appliances built in compliance with current standards (CE)
%
Tank dimensions 240x380xh505 mm.Quantity of oil in use, min. 13 lit. max. 15 lit.1 chrome steel basket, dimensions 225x325xh125 mm. Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th) with overflow zone, adjustable stainless steel feet (150/200mm), waterproof "IPX5".Y-shaped deep-drawn tank with rounded corners, equipped with a cold zone. Made of AISI 304 stainless steel. Drain tap (ball valve) and tank for oil settling. Stainless steel cover as standard.Electric heating by radiant...
%
Tank dimensions 240x380xh505 mm.Quantity of oil in use, min. 13 lit. max. 15 lit.1 chrome steel basket, dimensions 225x325xh125 mm. Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th) with overflow zone, adjustable stainless steel feet (150/200mm), waterproof "IPX5".Y-shaped deep-drawn tank with rounded corners, equipped with a cold zone. Made of AISI 304 stainless steel. Drain tap (ball valve) and tank for oil settling. Stainless steel cover as standard.Electric heating by radiant...
%
Tank dimensions 630x510xh110 mm, surface area 32.1 dm2. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), adjustable stainless steel feet (150-200 mm), waterproof IPX5Tank in AISI 316 "COMPOUND" stainless steel, with high thermal conductivity.Plug and extension for discharge, supplied as standard.Electric heating: stainless steel armoured resistors, positioned under the tank, regulation from 120 to 300°C.Safety device in case of overheating.Appliances built in compliance with...
%
Tank dimensions 630x510xh110 mm, surface area 32.1 dm2. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), adjustable stainless steel feet (150-200 mm), waterproof IPX5Tank in AISI 316 "COMPOUND" stainless steel, with high thermal conductivity.Plug and extension for discharge, supplied as standard.Electric heating: stainless steel armoured resistors, positioned under the tank, regulation from 120 to 300°C.Safety device in case of overheating.Appliances built in compliance with...
%
- 5 independent plates, Ø 180 mm (5x 2 kW).- " Stamped " upper top. - Made of AISI 304 stainless steel. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by 6-position switch. - The appliance is built in compliance with all the regulations (CE) in force.
%
5 independent plates, Ø 180 mm (5x 2 kW). " Stamped " upper top.Made of AISI 304 stainless steel.Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by 6-position switch.The appliance is built in compliance with all the regulations (CE) in force.
%
Production 400 kg/24/h. to combine with a storage unit.Air condenser. System with helicoidal fillings (continuous production).Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290.Manufactured in stainless steel AISI 304.The equipment is manufactured following the (CE) standards in force.