%
3 speeds (1st Speed 77 rpm and 2nd Speed 154 rpm and 3rd Speed 308 rpm).Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 40 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact...
%
Variable speed (Min. 65 rpm & Max. 551 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 40 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact with the...
%
%
Realisation in anodized aluminium, base in stainless steel.Automatic or manual cutting.Programmation of the cutting from 10 to 50 slices or continuous.Blade in stainless steel AISI 304, automatic sharpening.Blade protection easy to remove.Cut capacity 245x300 mm, cut adjustment from 0 to15 mm, trajectory of carriage 330 mm, plate 270x260 mm.Low tension control 24 V.Belt drive.
%
Realisation in anodized aluminium, base in stainless steel.Automatic or manual cutting.Programmation of the cutting from 10 to 50 slices or continuous.Blade in stainless steel AISI 304, automatic sharpening.Blade protection easy to remove.Cut capacity 245x300 mm, cut adjustment from 0 to15 mm, trajectory of carriage 330 mm, plate 270x260 mm.Low tension control 24 V.Belt drive.
%
For each and every product such as ham, sausage, raw meat, cheese.Automatic carriage motion with variable speed control (it can be used manually as well).Independent controls for carriage motion and blade.Exclusive designed carriage with a special end weight and an adjustable vertical product fence to provide stability and advance products evenly.Stainless steel base.Oblique blade, 35° inclination (a blade extractor comes standard).Max. cutting capacity: 270xh230 (Ø 255 mm), slice thickness:...
%
Vertical, straight-blade slicer.Double-feed carriage with a clamping arm holding firmly in place all types of hams and cold meats.Max. cutting capacity: 270xh250 (Ø 250 mm), slice thickness: 0-30 mm.50 mm gap between blade and body. Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.A maintenance Kit comes...
%
Gravity-feed, 38° inclination (a blade extractor comes standard).Max. cutting capacity 270xh230 (Ø 255 mm), slice thickness: 0-30 mm.50 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and...
%
Self-lubricating, endless screw in oil-bath gear drive.Gravity-feed 35° inclination (a blade extractor comes standard).Max. cutting capacity 270xh230 (Ø 255 mm), slice thickness 0-30 mm.50 mm gap between blade and body. Elegant and efficient, made of anodized and polished aluminium alloy melting.Hardened, chrome-plated and rectified steel blade, fixed protection ring and blade cover with microswitch (100% safe).Reinforced stop, protection of the stop slide, removable.Carriage on stainless...
%
Large flow rate, for large distribution.German oblique blade "Grund & Bunse", inclination at 35°.Precise opening movement of the blade over the first 3 mm.Max. cutting capacity: 307xh220 mm (Ø 250 mm), thickness 0-24 mm.49 mm space between blade and frame. Compact, robust, elegant and efficient, made of cast anodized and polished aluminium alloy.Hardened, chrome-plated and ground steel blade, fixed protection ring and blade cover with microswitch (100% secure).Reinforced stop, protection...
%
Vertical, straight-blade slicer.Double-feed carriage for slicing large joints of raw meat.Max. cutting capacity: 250xh245 (Ø 245 mm), slice thickness: 0-30 mm.50 mm gap between blade and motor. Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.A maintenance Kit comes standard (incl. blade extractor).Carriage...
%
%
Stainless steel sheet structure, brushed finishing. Insulated withexpanded polyurethane panels.Insulated top lids opening outwards through 180° to form supportsurfaces, complete with edges to retain condensation.Pressed stainless steel basin without sharp edges, withthermostats, for GN containers up to 20 cm depth (not included).Heated with dry resistance elements underneath each basin.Insulated movement handles.Edge bumper strips in grey non-marking rubber.Castors diam. 16 cm, with two...
%
%
Tank: 310x690xh160 mm, trays GN-150 mm. (NB: GN trays not included).Cupboard (GN 1/1) (340x940xh360 mm). Made in stainless steel AISI 304, adjustable feet in stainless steel.Waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in stainless steel AISI 304. "Stamped" tank in stainless steel AISI 304 welded (continuous), with all corners and interior corners rounded for easy and hygienic maintenance, a drain valve (bullet) is placed on the front of the unit. Electric heating by...
%
Dimensions of the basin: 306x510xh156 mm, for GN trays till 150 mm.NB: delivered without GN tray. Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), levelling cylinders, waterproofing "IPX4".Tank, with rounded corners, in AISI 304 stainless steel. Discharge valve.Electric heating by AISI 304 stainless steel armoured resistors, placed underneath the tank. ON/OFF switch, regulation from 30°C to 90°C.Appliances built in compliance with current standards (CE)
%
- Dimensiones tanque: 630x510xh156 mm, para cubas GN de hasta 150 mm. - Para el suministro automático de agua E17/BM8T ver A17/R2BM. - Nota: se suministra sin cubas Gastronorm.- De acero inoxidable AISI 304, "top" embutido de 15/10 mm de espesor, patas niveladoras, impermeable "IPX4" - Tanque con esquinas redondeadas, de acero inoxidable AISI 304. Válvula de drenaje. - Calefacción eléctrica con elementos calefactores blindados de acero inoxidable AISI 304, situados bajo el depósito....
%
- Tank dimensions: 630x510xh156 mm, for GN trays up to 150 mm. - For automatic water supply E17/BM8T See (A17/R2BM).- NB: delivered without gastronorm tray.- Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), levelling cylinders, waterproofing "IPX4". - Tank, with rounded corners, in AISI 304 stainless steel. Discharge valve. - Electric heating by AISI 304 stainless steel armoured resistors, placed underneath the tank. ON/OFF switch, regulation from 30°C to 90°C. - Appliances built...
%
Tank dimensions: 350x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
- Tank dimensions: 245x465xh170 mm, for GN containers up to 150 mm.- Made of stainless steel AISI 304, levelling feet. - Tank in AISI 304 stainless steel, equipped as standard with a perforated bottom grid, a drain cock (ball valve) is placed on the front of the appliance. - Electric heating, by means of stainless steel armoured resistances, placed under the bottom of the tank, outside. ON/OFF switch, temperature regulation from 30°C to 90°C, by thermostat. - The appliance is built in...
%
Tank dimensions: 510x465xh170 mm, for GN containers up to 150 mm. Made of stainless steel AISI 304, levelling feet.Tank in AISI 304 stainless steel, equipped as standard with a perforated bottom grid, a drain cock (ball valve) is placed on the front of the appliance.Electric heating, by means of stainless steel armoured resistances, placed under the bottom of the tank, outside. ON/OFF switch, temperature regulation from 30°C to 90°C, by thermostat.The appliance is built in compliance with all...