%
Chamber for 1 pizza Ø 430 mm.Fresh pizza: cooking in 3'30, frozen in 4'30.Realization in stainless steel.Insulation in rock wool very thick.Unique concept: heating by infra-red quartz (1050°C)Sole in refractory stone.Very fast pre-heating (15 min.).Timer 15 min. with continuous position.Thermostat 0-350°C for the cooking chamber, 1 energy regulator for the sole, tensioning warning light, heating warning light.Safety thermostat delivered standard.Door with double insulation fitted with a...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1.Standard supplied with 2 grids GN 1/1. Compact, space-saving ovensDirect steam by "nebulisation".Convection heating: by means of shielded stainless steel resistors placed behind the turbine deflector.Depth loading, spacing 67 mm.Easy servicing, access to controls from the sideHinged turbine deflector, easy...
%
Oven "LENGTHWISE" loading plates GN 1/3 ,1/2, 2/3 et 1/1Standard with 1 grid GN 1/1Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges.Condensate harvest bowl, below the door.Halogen light.Door...
%
Oven "LENGTHWISE" loading plates GN 1/3, 1/2 and 2/3Standard with 1 GN Grid 2/3Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges.Condensate harvest bowl, below the door.Halogen light.Door with...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard delivered with 1 grid GN 1/1 Compact, space-saving ovensDirect steam by "nebulisation".Convection heating: by means of shielded stainless steel resistors placed behind the turbine deflector.Depth loading, spacing 67 mm.Easy servicing, access to controls from the sideHinged turbine deflector, easy...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1.Standard supplied with 2 grids GN 1/1. Compact ovens, don't take a lot of place.Direct steam generation through "nebulization".Convection heating: by a gas burner (PREMIX SYSTEM) placed in the room, behind the turbine deflector.In-depth loading 67 mm.Rotating and removable hinged air conveyor, easy cleaning.Cooking...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard delivered with 1 grid GN 1/1 Compact, space-saving furnacesDirect steam by "nebulization"Convection heating: by a gas burner (PREMIX SYSTEM) placed in the chamber, behind the turbine deflector.Depth loading, spacing 67 mmEasy after-sales service, access to controls from the side partHinged turbine deflector, easy...
%
Cooling capacity rendered 633 (W/f) for chamber volume 3,0 m³ / 3000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Cooling capacity rendered 824 (W/f) for chamber volume 5,0 m³ / 5000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Cooling capacity rendered 1258 (W/f) for chamber volume 10,2 m³ / 10200 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity rendered 1509 (W/f) for chamber volume 13,2 m³ / 13200 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity rendered 2313 (W/f) for chamber volume 27,8 m³ /27800 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity 2139 (W/f) for room volume 18,1 m³ / 18100 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard...
%
Cooling capacity 3490 (W/f) for room volume 34,3 m³ / 34300 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve.Also equipped with a high pressure switch (fixed calibration) (C-PMAX-R). Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a...
%
Cooling capacity 981 (W/f) for room volume 6,2 m³ / 6200 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a high...
%
Cooling capacity 1800 (W/f) for room volume 14,9 m³ / 14900 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a...
%
Oven "LENGHTWISE" loading plates GN 1/3 ,1/2 , 2/3 and 1/1Standard supplied with 2 grids GN 1/1.Compact ovens.With standard humidifier.Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges, predisposed for grease filter.Integrated...
%
Oven "LENGHTWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard supplied with 2 grids GN 1/1.Stainless steel base, standard supplied.Compact ovens.With standard humidifier.Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges,...
%
Oven "LENGHTWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard supplied with 1 grid GN 1/1.Compact ovens.With standard humidifier.Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges, predisposed for grease filter.Integrated...
%
4x GN2/3 (353x325 mm)Standard supplied with 1 grid GN 2/3.1 Turbine "autorevers"Heating by stainless steel armoured resistance(s), placed behind the deflector and "direct" steam by "nebulisation".Depth loading, GN plates 1/3 - 1/2 - 2/3 - 1/1, removable plate holder structure, 67 mm spacing.Easy after-sales service, front access.Baking chamber in AISI 304 stainless steel, rounded corners and corners (easy maintenance), deep-drawn bottom with discharge.Integrated condensate collection tray (on...
%
7x GN 1/1 (530x325 mm)Standard supplied with 1 grid GN 1/1.1 Turbine "autorevers"Heating by stainless steel armoured resistance(s), placed behind the deflector and "direct" steam by "nebulisation".Depth loading, GN plates 1/3 - 1/2 - 2/3 - 1/1, removable plate holder structure, 67 mm spacing.Easy after-sales service, front access.Baking chamber in AISI 304 stainless steel, rounded corners and corners (easy maintenance), deep-drawn bottom with discharge.Integrated condensate collection tray...
%
Cast-iron plate, necessary measurements 365x255 mm.Stabilizing system in the upper plate, in order to keep the upper plate always in a horizontal position.Thermostat regulation up to 250°.
%
Plate in cast iron with ally for food, useful dimensions 225x255 mm.Stabilizing system in the top plate, allowing a constant horizontal position.Top plate handle in heatproof material.Heating resistances, situated under the cast iron plate.Regulation through thermostat till 250°C, together with a warning light.Structure in AISI 304 stainless steel.Adjustable lower legs.The equipment is manufactured following the (CE) standards in force
%
Plate in cast iron, useful dimensions 550x255 mm.Stabilizing system in the top plate, allowing a constant horizontal position.Regulation through thermostat till 250°C.