%
Low version, installation option under sinks and cupboards etc...."Double-walled" VersionLoad height 405 mmPlate height 380 mm From 60 till 24 baskets/hour, cycles 60'' - 120'' - 150" or continuousRotating wash and rinse arms (upper and lower), lower in stainless steelSelf-cleaning jetsTank (23 Lt., 2,1 kW) with rounded edges, "stamped" bottom"Stamped" double walled door, "removable" gasketRemovable control panelAutomatic filling of the tankCheck valveHot water rinse (2,5 Lt. water...
%
Low version, installation option under sinks and cupboards etc...."Double-walled" VersionWith anti-pollution device, AB type (Break Tank), including rinse pump (atmospheric boiler)Load height 405 mmPlate height 380 mm3 stages: washing, discharge, rinseDrain pump, standardRinse pump, standard (atmospheric boiler) Double-walled version completely in stainless steel AISI 304. - From 60 till 24 baskets/hour, cycles 60'' - 120'' - 150" or continuous - Rotating wash and rinse arms (upper and...
%
- Water condenser.- Multifunctional pastoturbine for mixing, heating, pasteurizing, cooling and lashing all creams, sauces and mixes. - Adjustable times and temperatures. - Intuitive and easy to use "Touch Screen" control panel (18 pre-installed cycles: 9 for ice cream, 7 for pastry, 2 for gastronomy) with the possibility of inserting new recipes. - Manual or fully automatic cycle. - Pasteurization and lashing are carried out in a single cylinder, avoiding any handling or transfer. - Vertical...
%
- Water condenser.- Multifunctional pastoturbine for mixing, heating, pasteurizing, cooling and lashing all creams, sauces and mixes. - Adjustable times and temperatures. - Intuitive and easy to use "Touch Screen" control panel (18 pre-installed cycles: 9 for ice cream, 7 for pastry, 2 for gastronomy) with the possibility of inserting new recipes. - Manual or fully automatic cycle. - Pasteurization and lashing are carried out in a single cylinder, avoiding any handling or transfer. - Vertical...
%
Realisation "double walled".Loading height for trays 380 mm (plates diam. 380 mm).LMD mixed washing, also dishes, cutleryStandard rinsing pump (atmospheric boiler)Made of double walls made of stainless steel AISI 304.Cycles 60'' - 120"-80" or continuous.Rotating washing and rinsing arms (upper and lower) (stainless steel lower).Self cleaning sprinklers.Tank (23Lit. 2,1Kw) with rounded edges, "deep-drawn" bottom."Integral" tank filter, made of "cast" stainless steel.Adjustable stainless steel...
%
Vertical, straight-blade slicer.Double-feed carriage with a clamping arm holding firmly in place all types of hams and cold meats.Max. cutting capacity: 270xh250 (Ø 250 mm), slice thickness: 0-30 mm.50 mm gap between blade and body. Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.A maintenance Kit comes...
%
Large flow rate, for large distribution.German oblique blade "Grund & Bunse", inclination at 35°.Precise opening movement of the blade over the first 3 mm.Max. cutting capacity: 307xh220 mm (Ø 250 mm), thickness 0-24 mm.49 mm space between blade and frame. Compact, robust, elegant and efficient, made of cast anodized and polished aluminium alloy.Hardened, chrome-plated and ground steel blade, fixed protection ring and blade cover with microswitch (100% secure).Reinforced stop, protection...
%
Vertical, straight-blade slicer.Double-feed carriage for slicing large joints of raw meat.Max. cutting capacity: 250xh245 (Ø 245 mm), slice thickness: 0-30 mm.50 mm gap between blade and motor. Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.A maintenance Kit comes standard (incl. blade extractor).Carriage...
%
Capacity 17 levels GN 2/1 (or 34x GN 1/1).Standard 5 pair of slides and 5 plasticized grids GN 2/1. Stainless steel austenitic structure (food).Opening door at 120 °, with a vertical lock with a key code.Hinges with stop at 100 °, closing with automatic recall.Built-in compressor unit (ambient T ° 32 ° C).Refrigerant gas R290.digital display.Ventilated internal evaporator.Integrated control panel, digital display.Electronic controller with automatic defrost.Possibility of use GN 2/1 or GN...
%
Timer from 0 to 60 minutes.Anodized aluminum and AISI 304 stainless steel construction.IMPORTANT: Please follow the instructions for use carefully! 1 fan.Rated output: 28g/h.For a concentration of 1ppm (parts per million), suitable for rooms up to 120m² / 360m³ (in 20 minutes), 240 m² / 720 m³ (in 40 minutes), 360m² / 1080 m³ (in 60 minutes).For a concentration of 2ppm (parts per million), suitable for rooms up to 60m² / 180m³ (in 20 minutes), 120 m² / 360 m³ (in 40 minutes), 180m² / 540 m³...
%
Timer from 0 to 60 minutes.AISI 304 stainless steel construction.IMPORTANT: Please follow the instructions for use carefully! 1 fan.Rated output: 56g/h.At a concentration of 1ppm (parts per million), suitable for rooms up to 240m² / 720m³ (in 20 minutes), 480 m² / 1440 m³ (in 40 minutes), 720m² / 2160 m³ (in 60 minutes).For a concentration of 2ppm (parts per million), suitable for rooms up to 120m² / 360m³ (in 20 minutes), 240 m² / 720 m³ (in 40 minutes), 360m² / 1080 m³ (in 60 minutes).
%
Flow rate: 2500 m³/o. (Pressure drop 210 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Three-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3400 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Made of ABS, easily removable tank, easy cleaning. Ventilated motor 2800 rpm.Standard 1 smooth knife and a mixer in ABS.Safety micro-switch.Lid in transparent Lexan, the addition of ingredients is possible thanks to a hole on the lid.Scraper as standard.Low voltage 24V controls, protection class (IP67), NVR (No-Voltage Release).
%
- Capacity kuip 6 Lit. (4 Kg) - Motor 1440 Tour/Min- Perfect for meat and vegetables, but also suitable for many other types of processing.- Completely made in AISI 304 stainless steel.- Blade driven by powerful ventilated asynchronous motor.- Highly robust tank in AISI 304 stainless steel, removable.- Easily removable interlocking lid to facilitate cleaning and sanitising.- Controls with IP 67 stainless steel buttons (recessed).- Hub of three blades, easily removable.- Maximum protection...
%
Capacity kuip 6 Lit. (4 Kg)Motor 1440 Tour/MinPerfect for meat and vegetables, but also suitable for many other types of processing.Completely made in AISI 304 stainless steel.Blade driven by powerful ventilated asynchronous motor.Highly robust tank in AISI 304 stainless steel, removable.Easily removable interlocking lid, as well as the blade cover, to facilitate cleaning and sanitising.Controls with IP 67 stainless steel buttons (recessed).Hub of three blades, easily removable.Maximum...
%
Expansion refrigerant R600aInternal dimensions: 890x510xh715Mechanical thermostat, T° -23° +10Digital thermometer.Internal capacity 289 liters. Double temperature (refrigeration/freezing)Solid lid, sliding.Digital thermometer.On/Off switch.Hermetic unit for ambient T° +32°, ventilated condenser.Static evaporator, placed in the "serpentine" walls.Manual defrost.External construction in white painted steel sheet.Internal realization, embossed aluminium.Insulation in CFC-free polyurethane.Frame...
%
Model 1 speed.Tank diameter 260 mm (10 liters) = 8 kg dough. Structure made of painted steel.Rotating cockpit (not removable) in stainless steel AISI 304.High hardness steel spiral, stainless steel divider AISI 304.Grid in stainless steel equipped with a security micro switch.Transmission by geared motor by oil bath, reliable, high-performance and silent!!Hanging motor, better ventilation, ease of maintenance.Low voltage control 24 V (IP65), NVR (No-Voltage Release) avoiding any unintentional...
%
Ventilated version, homogeneous distribution of the temperature.Height of the adjustable exposure base, GN containers, bottles, etc...Capacity 3x GN 1/1.Recessed dimensions 1090x690. Deep-drawn tank 115 mm (GN-100 mm trays), rounded corners and corners (perfect hygiene).1/2" drainVentilated cooling by a finned evaporator coupled to a fan, all placed under the tankControl panel with electronic regulation from 0° +4°, digital displayCFC-free expanded polyurethane insulationPredisposed for the...
%
Dough weight 210 to 600 gr. adjustable pizza diameter 260 to 400 mm. Very flexible and performing rolling machines.Front and lateral structure in stainless steel AISI 304, back carter in white sheet.Cold rolling, round shaped pizza dough (oblique top roller couple).Food suitable Teflon rollers; they have adjustable thickness grip, plexiglass top protection, bottom protection in stainless steel.Electric switches at low tension 24 Volts, finger touch.The equipment is manufactured following the...
%
Dough weight 210 to 600 gr. adjustable pizza diam. 260 to 400 mm. Very flexible and performing rolling machines.Front and lateral structure in stainless steel AISI 304, back carter in white sheet.Cold rolling, pizza dough on tray (parallel roller couples).Food suitable Teflon rollers, they have adjustable thickness grip, top protection in plexiglass, bottom protection in stainless steel.Electric switches at low tension 24 Volts, finger touch.Pedal control, delivered as standard.The equipment...
%
Dough weight 210to 600 gr. adjustable pizza diam. 260 to 400 mm. Compact and competitive rolling machine.Front and lateral structure in stainless steel AISI 304, back carter in white sheet.Cold rolling, pizza dough on tray (one roller couple only).Food suitable Teflon rollers, adjustable thickness grip, stainless steel roller protection.Electric switch at low tension 24 V.No electric foot pedal connection.The equipment is manufactured following the (CE) standards in force.
%
Turns/minute: Rpm 270.Duration of the production cycle 60-90 sec.Color BLACK. Stainless steel undercarriage AISI 304.Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges.Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor).Digital control panel (placed at the...