%
- Air condenser.- Multifunctional pastoturbine for mixing, heating, pasteurizing, cooling and lashing all creams, sauces and mixes. - Adjustable times and temperatures. - Intuitive and easy to use "Touch Screen" control panel (18 pre-installed cycles: 9 for ice cream, 7 for pastry, 2 for gastronomy) with the possibility of inserting new recipes. - Manual or fully automatic cycle. - Pasteurization and lashing are carried out in a single cylinder, avoiding any handling or transfer. - Vertical...
%
- Air condenser.- Multifunctional pastoturbine for mixing, heating, pasteurizing, cooling and lashing all creams, sauces and mixes. - Adjustable times and temperatures. - Intuitive and easy to use "Touch Screen" control panel (18 pre-installed cycles: 9 for ice cream, 7 for pastry, 2 for gastronomy) with the possibility of inserting new recipes. - Manual or fully automatic cycle. - Pasteurization and lashing are carried out in a single cylinder, avoiding any handling or transfer. - Vertical...
%
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
- Water condenser- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
- Water condenser- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
Stainless steel construction.Each plate with lighted On/Off switch.NB: delivered without carafes4 lower feet in ABSThe device is built in compliance with the current CE standards.
%
Internal dimensions 660x420xh450Standard equipment: 1 grid EN 600x4001 "autoreverse" turbines. Welded room in stainless steel (AISI 304), rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...
%
Vacuum pump capacity 250m3/h (Busch type).Cycle time 15-30 seconds.Stainless steel cover.Chamber dimensions: 2x 840x830xh250 mm (Sealing length: 4 x 840mm).Working height 900 mm.4 sealing bars (2 per chamber)Digital control panel with 10 programs, maintenance program and pump cleaning.Soft air: gradual vacuuming.On request: gas injection system "nitrogen", ....Professional machines on pedestals.Vacuum is managed in % thanks to the integrated vacuum sensor, no more risk of inadvertent...
%
Capacity 2x GN 1/1.Recessed dimensions 765x585. Deep-drawn tank 160mm deep (GN-150mm trays), rounded corners and corners (perfect hygiene)1/2" drain.Cooling by a coil evaporator (copper), placed just below the tankControl panel with electronic regulation of +2° +8°, digital displayCFC-free expanded polyurethane insulationPredisposed for the placement of an additional thermometer to display the T° on the customer side (On request)Integrated refrigeration unit, refrigerant R290aAutomatic...
%
Capacity 3x GN 1/1.Recessed dimensions 1090x585. 160 mm-deep stamped tank (GN-150 mm trays), rounded angles and - Deep-drawn tank 160mm deep (GN-150mm tanks), rounded corners and corners (perfect hygiene)1/2" drain.Cooling by a coil evaporator (copper), placed just below the tankControl panel with electronic regulation of +2° +8°, digital displayCFC-free expanded polyurethane insulationPredisposed for the placement of an additional thermometer to display the T° on the customer side (On...
%
2 separate cooking zones Ø 230 mm (2x 3,5 kW). Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), levelling cylinders, waterproof "IPX4".Ceramic glass induction hob (6 mm). Focus diameter 230 mm, energy regulator.Principle of INDUCTION: The heat is produced by a magnetic field directly inside the container, this field is created electronically, there is no heating element, which gives it great security. Cooking is done almost without any heat loss; it is the most economical...
%
2 separate cooking zones Ø 230 mm (2x 3,5 kW).Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), levelling cylinders, waterproof "IPX4".Ceramic glass induction hob (6 mm). Focus diameter 230 mm, energy regulator.Principle of INDUCTION:The heat is produced by a magnetic field directly inside the container, this field is created electronically, there is no heating element, which gives it great security. Cooking is done almost without any heat loss; it is the most economical...
%
Plate (370x585mm), with 2 cooking zones (2x 2,5kW)Made of AISI 304 stainless steel, "Top stamped" (15/10 mm), adjustable cylindersCooking surface, waterproof "IPX4".Plate (15 mm) in "thermo-diffuser" steel, heated by resistors positioned below.Combustion chamber thermally insulated with glass wool.Control by 8-position switch (each cooking zone), with indicator lightAppliances built in compliance with current standards (CE)
%
2 separate cooking zones Ø 220 mm (2x 3,5 kW). Made of stainless steel AISI 304, adjustable cylinders.Watertight top (15/10 mm) in AISI 304 stainless steel.Rear chimney in stainless steel AISI 304.Cooking top, watertight "IPX4".Glass ceramic hob (6 mm), with 4 independent inductors underneath.Energy regulator with 6 positions (each hearth), with pilot light, front access for easy maintenance.INDUCTION Principle: The heat is produced by a magnetic field directly inside the container, this...
%
- Standard with electric switch.- Useful capacity of the tank (+/- 7 liters).- Basket dimensions 220x190xh110mm.- Designed in stainless steel, fitted with 2 lateral and thermal handles. - Stainless steel baskets ("strengthened") with thermal handle.- Stainless steel tank AISI 304, fitted with a lid.- Drain tap, equipped with a safety device. - Shielded element heating "treated" and immersed in the tank.- Cold area: no carbonization of the wastes, no taste transmission.-Thermostat from 0° to...
%
Temperature -15° -22° CRefrigerant R290Static evaporators "evaporator grids".Manual defrost.6 grids can receive PVC lockers. Exterior manufactured in stainless steel 430, white interior in molded ABS (freezer: lacquered steel sheet).Door (reversible), with magnetic seal closure (by pressure), easy changing without tools, ergonomic handle.Key lock door, standardElectronic regulation, digital displayPolyurethane insulation (60 mm), without CFC'sCooling unit with climate category 4 (placed...
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Saladette capacity GN 1 x 1/1, 2 x 1/2, 3 x 1/9, h150 mm (optional vats).Telescopic and flip-top cover in stainless steel.Shelf in polyethylene (food).1 ventilated eveporator.With: 1 grid GN 1/1 (530x325 mm), per door.4 adjustable stainless steel feet.Monocoque designInternal construction in stainless steel (Food) AISI 304, external AISI 441.Top in AISI 304 stainless steel.Built-in upper refrigerated structure with a cover.Racks and slides in stainless steel (anti-tilt), allowing the grids to...
%
Burner in painted cast iron with brass crown with high heat conductibility (1x 7kW).Lighting by back-burner, thermocouple protection.Cast iron grid armature and more robust stainless steel structure (reinforced).Reduction grid for burner (stainless steel).Removable stainless steel bowl and burner for easy maintenance.Enamelled grill 350 x 290 mm.Manufactured in stainless steel.4 lower cylinders, adjustable.The device is built in compliance with the current CE standards.