%
Superior top 1.5 mm, rounded edges 70 mm.Pressed tank GN200 mm, corners rounded, drainage and overflow.Water level in the basin controlled by electro valve.Electric heating by element sited under tank.Ventilated cupboard, heated by electric element.Made in stainless steel with adjustable feet in stainless steel 150 mm.
%
%
Stainless steel construction.Each plate with lighted On/Off switch.NB: delivered without carafes4 lower feet in ABSThe device is built in compliance with the current CE standards.
%
Production capacity 100 kg (160 Lt)Flour capacity 66 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 230 rpm) & (Tank: 16 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 700xh410 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
Production capacity 130 kg (200 Lt)Flour capacity 86 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 230 rpm) & (Tank: 16 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 800xh430 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
Production capacity 80 kg (130 Lt)Flour capacity 53 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 230 rpm) & (Tank: 16 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 700xh370 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
Oven "LENGTHWISE" loading plates GN 1/3 ,1/2, 2/3 et 1/1Standard with 1 grid GN 1/1Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges.Condensate harvest bowl, below the door.Halogen light.Door...
%
Electronic control panel with digital display"LENGTHWISE" oven loading plates GN 1/3, 1/2, 2/3 and 1/1Standard delivered with 1 grid GN 1/1Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and...
%
2 plates Ø 230 mm, independent (2x 2.6 kW). Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), adjustable cylinders, waterproof "IPX4".Cast iron plates, with a stainless steel sealing edge. Regulation by 7-position switch.Appliances built in compliance with current standards (CE)
%
2 plates Ø 230 mm, independent (2x 2.6 kW). Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), adjustable cylinders, waterproof "IPX4".Cast iron plates, with a stainless steel sealing edge. Regulation by 7-position switch.Appliances built in compliance with current standards (CE)
%
- 2 plates 2,6 kW, diameter of 220 mm.- Manufactured in stainless steel 18/10 AISI 304, adjustable legs of stainless steel.- Hobs of cast iron, 220 mm diameter, with closing borders of stainless steel. Power regulation through a switch with 6 positions.
%
- 2 platen 2,4 kW, diameter of 220 mm.- Manufactured in stainless steel 18/10 AISI 304, adjustable legs of stainless steel.- Hobs of cast iron, 220 mm diameter, with closing borders of stainless steel. Power regulation through a switch with 6 positions.
%
2 plates, (2,6 kW), dimensions 220x220 mm.AISI 304 stainless steel construction, adjustable stainless steel cylinders.Pressed and sealed top (15/10 mm) in AISI 304 stainless steel.Rear chimney in AISI 304 stainless steel.Cast iron plates, with stainless steel sealing edge, safety device in case of overheating.Heating power regulation by means of a 7-position switch, front access for easy maintenance.
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Saladette capacity GN 1 x 1/1, 2 x 1/2, 3 x 1/9, h150 mm (optional vats).Telescopic and flip-top cover in stainless steel.Shelf in polyethylene (food).1 ventilated eveporator.With: 1 grid GN 1/1 (530x325 mm), per door.4 adjustable stainless steel feet.Monocoque designInternal construction in stainless steel (Food) AISI 304, external AISI 441.Top in AISI 304 stainless steel.Built-in upper refrigerated structure with a cover.Racks and slides in stainless steel (anti-tilt), allowing the grids to...
%
%
2 temperatures (upper room +5° +10°C, below room +10° +18°C)Capacity 45bottles (75 cl.)Door frame and handle in stainless steel.Standard: 6 shelves with drawer made of wood.Lockable with keys. External made of lacquered steel (BLACK), thermoformed ABS insideGlass door (reversible), double glazing "Thermopane®", closure by magnetic seal.Electronic control for constant temperature, with digital display.Internal LED lighting.Integrated compressor unit climatic class 4 (30°C & 55% HR).Sound...
%
1 temperature (+5° +18°C)Capacity 45 bottles (75 cl.)Door frame and handle in stainless steel.Standard: 4 shelves with drawer made of wood.With key lock. External made of lacquered steel (BLACK), thermoformed ABS insideGlass door (reversible), double glazing "Thermopane®", closure by magnetic seal.Electronic control for constant temperature, with digital display.Internal LED lighting.Integrated compressor unit climatic class 4 (30°C & 55% HR).Sound level 40 dB (A).Evaporator...
%