%
%
- Motorized closing of the porthole.- "Sloping" upper control panel. - Anti-balance control (no necessity for ground anchor). - With "touch screen" (7") embedded computer, multilingual, 200 memory programs (8 programmed from factory). - Super spin-drying 1000 turns/min. (factor-G 300). - Stainless steel tank and basket AISI 304. - Residual humidity 50 %. - Connection cold or hot water. - Upper basin with 3 compartments for washing products. - Emergency stop button, "Hot shot" kind.- Designed...
%
%
Schedule production: 150 liters. Production of whipped cream and mousses with high overrun.Keeps the cream in perfect conditions preventing phase of separation.Consistent refrigeration from the container to the dispensing head.Allows interruption of production at anytime.Removable tank made of stainless steel, maintains easy and perfect hygiene.Standard: Labyrinth stem for cream with fat between 35% and 40% (other stem models possible on request).
%
Schedule production: 300 liters continuous. Production of whipped cream and mousses with high overrun.Keeps the cream in perfect conditions preventing phase of separation.Consistent refrigeration from the container to the dispensing head.Allows interruption of production at anytime.Removable tank made of stainless steel, maintains easy and perfect hygiene.Standard: Labyrinth stem for cream with fat between 35% and 40% (other stem models possible on request).
%
%
Included: 3 grids GN 2/1 (530x650 mm).4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and reversible handle, closing by "triple chamber" and magnetic seal (easy replacement,...
%
Production per hour: 20 Lit/h.Chassis in stainless steel and "aluminium alloy".Disk and filter basket in stainless steel and nylon, all the parts in contact with the food are removable. easy cleaning.Orifice 65 mm x 40 mm, pusher in PVC.Ventilated motor, 3000/6000 Turns/Minutes. Thermico.Waste collector basket (Ø180 mm, h= 270 mm).Switch On/Off, micro-switch security device.The equipment is manufactured following the (CE) standards in force
%
Included: 10 trays GN 1/1-h100 mm in polycarbonate.Evaporator at copper coil (lateral), hidden by a perforated stainless steel deflector.Manual defrosting, with water collecting tray.Bottom fitted with draining tap.4 adjustable stainless steel feet.Refrigerant gas R290. Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom...
%
%
- Luminous poster on the front side, with switch.2 service plugs (230/1N) inside the cabinet.Sneeze guard front glass in "tempered" glass, with one little service shelf made of stainless steel.Strenghtened work surface, with two openings to pass the cables of the devices, two openings on the back side of the cabinet too.Strenghtened intermediary shelf.Sliding doors, built in handles, standard delivered with key locks.Put on 4 castors, 2 with brakes.Manufactured in stainless steel 18/10 AISI...
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Included: 20 pairs of slides (600x800 mm) by door.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel, inside and outside in AISI 304 (back in galvanized steel), monocoque frame.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal with "3 compartments" (easy replacement...
%
Included: 20 pairs of slides (400x600 mm) by door.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel AISI 304, inside and outside (back in galvanized steel), monocoque frame.Stainless steel racks and slides (anti-tilting), allowing to place the plates as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal with "3 compartments" (easy replacement...
%
Included: 20 pairs of slides (600x800 mm) by door.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel AISI 304, inside and outside (back in galvanized steel), monocoque frame.Stainless steel racks and slides (anti-tilting), allowing to place the plates as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal with "3 compartments" (easy replacement...
%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
Self-lubricating, endless screw in oil-bath gear drive.Gravity-feed 35° inclination (a blade extractor comes standard).Max. cutting capacity 270xh230 (Ø 255 mm), slice thickness 0-30 mm.50 mm gap between blade and body. Elegant and efficient, made of anodized and polished aluminium alloy melting.Hardened, chrome-plated and rectified steel blade, fixed protection ring and blade cover with microswitch (100% safe).Reinforced stop, protection of the stop slide, removable.Carriage on stainless...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet. Cooking...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet. Cooking...
%