%
For motor type:7/7/14 - 9/9/9 - 9/9/14 - 10/10/9 - 10/10/14.On/Off switch and potentiometer speed variatorOn/Off lighting switch.
%
For motor type:12/9/9 - 12/12/9.On/Off switch and potentiometer speed variator.On/Off lighting switch.
%
%
Voor ventilator motor van het type:9/9/14 - 12/9/9.- On / off schakelaar en snelheid variator door potontiometer.
%
%
Voor ventilator motor van het type:7/7/14 - 9/9/9 - 10/10/9 - 10/10/14.- On / off schakelaar en snelheid variator door potontiometer.
%
For motor: CVX/4T - CVX/6T - CVX/8TSuitable for indoor use, IP20 protection ratingExternal control terminal. Control panel with digital screen.Three-phase input / three-phase output (3x400V / 3x400V).EMC filter (electromagnetic compatibility).Input frequency: 48-62 Hz, output frequency: 0-500 Hz.Accepts an overload of 150% for 60 seconds (175% for 2.5 seconds).Intensive operation up to an ambient temperature of -20° to +50°C (storage temperature: -40° to +60°C).Quick commissioning.Basic...
%
For motor: CVX/4T - CVX/6T - CVX/8TSuitable for outdoor use, IP66 protection rating // NEMA 4X resistant to ultraviolet (UV) rays, grease, oil, and acids.Potentiometer for speed control.Forward/reverse selector.Power disconnect switch. Control panel with digital screen.Three-phase input / three-phase output (3x400V / 3x400V).EMC filter (electromagnetic compatibility).Input frequency: 48-62 Hz, output frequency: 0-500 Hz.Accepts an overload of 150% for 60 seconds (175% for 2.5...
%
For motor type variator : CA7/7/15 - CA9/7/25 - CVX/2M - CVX/4M - CVX/6M.Protection class: IP55Maximum motor power absorption: 4.5AMaximum light power absorption: 5A Variator for motor, light, and solenoid valve control.On/off switch and speed variator with potentiometer.On/off switch for lighting.Management of gas solenoid valve (230V/1N-50Hz, max. 1A)Protection fuse and speed calibration potentiometers MIN & MAX.
%
For motor type: CA10/8/30 - CA12/12/45 - CVX/8M.Protection class: IP50Maximum motor power absorption: 8AMaximum light power absorption: 5A Variator for motor, light, and solenoid valve control.On/off switch and speed variator with potentiometer.On/off switch for lighting.Management of gas solenoid valve (230V/1N-50Hz, max. 1A)Protection fuse and speed calibration potentiometers MIN & MAX.
%
For motor type variator: CA7/7/15 - CA9/7/25 - CVX/2M - CVX/4M - CVX/6M.Protection class: IP55Maximum motor power absorption: 4.5A Variator for motor and solenoid valve control.On/off switch and speed variator with potentiometer.Management of gas solenoid valve (230V/1N-50Hz, max. 1A)Protection fuse and speed calibration potentiometers MIN & MAX.
%
For motor: CA10/8/30 - CA12/12/45 - CVX/8MProtection class: IP50Maximum motor power absorption: 8A Variator for motor and solenoid valve control.On/off switch and speed variator with potentiometer.Management of gas solenoid valve (230V/1N-50Hz, max. 1A)Protection fuse and speed calibration potentiometers MIN & MAX.
%
Included: 2 EURONORM grids (600x400 mm), with slides.6 adjustable stainless steel feet.Built-in refrigerated structure, with glasses (breath-shield), 8x GN 1/4 h150 mm (trays in option).3 neutral drawers for dough roll trays 600x400 mm (trays in option). Compact structure, inside and outside realization in (food) stainless steel, upper top (40 mm).Stamped inside bottom with draining cap (big maintenance), rounded angles and corners (without bumps), racks and slides (anti-swinging) in...
%
2 drawers version GN 1/2+1/3 (maximum height 320 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Working board in granite.Integrated saladette well, with a top structure in stainless steel AISI 304.NB: delivered without pans GN.. Exterior and interior finish in stainless steel austenitic (alimentary).. Angles and edges rounded off.. Delivered with 1 adjustable shelf GN 1/1 each door.. Electronic thermostat in closed moisture proof housing.. Evaporator tubes integrated in the walls (3 sides), polyurethane insulation, without CFC's.. Ventilated saladette well, automatic defrost, auto-...
%
1 drawer for utensils placed over the group.Included: 4 pairs of slides "EURONORM" by door (trays 600x400).2 neutral drawers on telescopic slides (capacity 4x trays 600x400 + 4 trays 600x400 = total of 8), maximum height of the trays (70 mm).Storeroom 564 liters with 2 ventilated-static evaporators.6 adjustable stainless steel feet.NB: delivered without trays 600x400 mm. Monocoque designWorktop of granite (white Porinho), thickness 30 mm (processed food), with "beveled" edges, rounded front...
%
Top with 50 mm edge (15/10th)Structure capacity 11x GN1/3-h150 mmIncluded: 1 bakery grid (600x400 mm), per door4 stainless steel swivel wheels, 2 with brakes.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameBuilt-in refrigerated structure, ventilated, GN 1/3 capacity, with 2 stainless steel covers, hingedStainless steel racks and slides, allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and...
%
2 drawers version GN 1/2+1/3 (Max. load height 300 mm).1 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 304 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 5 (40°C Temperature & 40% Humidity),...
%
2 drawers version GN 1/1 (max. load Height 300 mm).1 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque design.Inside and outside (top included) manufactured in stainless steel AISI 304 (also the back).Stamped interior bottom, rounded angles and corners (no rough edges).Drawers with ergonomic handles, on telescopic runners, closed by magnetic pressure seals (easy replacement, no tools required).Class 5 compressor unit (40°C Temperature & 40% Humidity), built into...