%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
Made of "anodized aluminum", food treated.Blade in stainless steel AISI 304.Sliding carriage with transparent Plexiglas protection.Cutting capacity : 200x260 mm.Sharpening device, delivered separately, with adapter.Cutting adjustment from 0-15 mm.Easily removable blade guard.No volt release" device that prevents the machine from starting during the cleaning phase.Low voltage control 24 V, protection class IP65.Safety microswitch on the blade.Blade cover ring (100% protection).The machine is...
%
%
%
Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1.Standard supplied with 2 grids GN 1/1.Compact, space-saving ovensDirect steam by "nebulisation".Convection heating: by means of shielded stainless steel resistors placed behind the turbine deflector.Turbine(s) with "Autoreverse" deviceDepth loading, spacing 67 mm.Easy servicing, access to controls from the sideHinged turbine deflector, easy maintenanceChamber made of stainless steel AISI 304, rounded corners and edges, suitable for...
%
Oven "LENGTHWISE" loading plates GN 1/3 ,1/2, 2/3 et 1/1Standard with 1 grid GN 1/1Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges.Condensate harvest bowl, below the door.Halogen light.Door...
%
Oven "LENGTHWISE" loading plates GN 1/3, 1/2 and 2/3Standard with 1 GN Grid 2/3Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges.Condensate harvest bowl, below the door.Halogen light.Door with...
%
Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard delivered with 1 grid GN 1/1Compact, space-saving ovensDirect steam by "nebulisation".Convection heating: by means of shielded stainless steel resistors placed behind the turbine deflector.Turbine(s) with "Autoreverse" deviceDepth loading, spacing 67 mm.Easy servicing, access to controls from the sideHinged turbine deflector, easy maintenanceChamber made of stainless steel AISI 304, rounded corners and edges, suitable for...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1.Standard supplied with 2 grids GN 1/1.Compact ovens, don't take a lot of place.Direct steam generation through "nebulization".Convection heating: by a gas burner (PREMIX SYSTEM) placed in the room, behind the turbine deflector.Turbine (s) with "Autoreverse" device (made of AISI 316 stainless steel).In-depth loading 67...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard delivered with 1 grid GN 1/1Compact, space-saving furnacesDirect steam by "nebulization"Convection heating: by a gas burner (PREMIX SYSTEM) placed in the chamber, behind the turbine deflector.Turbine(s) with "Auto-reverse" device (made of AISI 316 stainless steel).Depth loading, spacing 67 mmEasy after-sales...
%
Oven "LENGHTWISE" loading plates GN 1/3 ,1/2 , 2/3 and 1/1Standard supplied with 2 grids GN 1/1.Compact ovens.With standard humidifier.Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges, predisposed for grease filter.Integrated...
%
Oven "LENGHTWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard supplied with 2 grids GN 1/1.Stainless steel base, standard supplied.Compact ovens.With standard humidifier.Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges,...
%
%
Oven "LENGHTWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard supplied with 1 grid GN 1/1.Compact ovens.With standard humidifier.Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges, predisposed for grease filter.Integrated...
%
4x GN2/3 (353x325 mm)Standard supplied with 1 grid GN 2/3.1 Turbine "autorevers"Heating by stainless steel armoured resistance(s), placed behind the deflector and "direct" steam by "nebulisation".Depth loading, GN plates 1/3 - 1/2 - 2/3 - 1/1, removable plate holder structure, 67 mm spacing.Easy after-sales service, front access.Baking chamber in AISI 304 stainless steel, rounded corners and corners (easy maintenance), deep-drawn bottom with discharge.Integrated condensate collection tray (on...
%
7x GN 1/1 (530x325 mm)Standard supplied with 1 grid GN 1/1.1 Turbine "autorevers"Heating by stainless steel armoured resistance(s), placed behind the deflector and "direct" steam by "nebulisation".Depth loading, GN plates 1/3 - 1/2 - 2/3 - 1/1, removable plate holder structure, 67 mm spacing.Easy after-sales service, front access.Baking chamber in AISI 304 stainless steel, rounded corners and corners (easy maintenance), deep-drawn bottom with discharge.Integrated condensate collection tray...