%
- Casing of the roll in Nomex, chromium-plated steel tank. - Control panel "Touch Screen" (4.3").- Function display, multilingual. - 30 memory programs (re-programmable).- "Automatic " regulation of the speed and temperature. - Cooling device of the cylinder "Cool Down". - Variable speed of the ironing. - Finger-shield and emergency stop button, "Hot shot" kind. - Delivered standard with lower anti panic bar. - Frame in painted steel (epoxy paint).PLUS:The Nomex is a fireproofing textile...
%
Superior top 1.5 mm, rounded edges 70 mm.Pressed tank GN200 mm, corners rounded, drainage and overflow.Water level in the basin controlled by electro valve.Electric heating by element sited under tank.Ventilated cupboard, heated by electric element.Made in stainless steel with adjustable feet in stainless steel 150 mm.
%
Production: 10/12 oranges (maximum diameter 70 mm) per minute.Storage capacity: 3 oranges.Loading ramp and recovery tank supplied as standard.Pressure control.Made of "food" materials that do not undergo any alteration in contact with orange juice.Designed for easy maintenance, exterior and interior.Automatic shutdown.
%
%
Turns/minute: 14000 rpm.Stainless steel cup (900 cl).Shaft with 4 stainless steel knives, ideal for cocktails and sorbets preparation.
%
Production capacity 100 kg (160 Lt)Flour capacity 66 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 230 rpm) & (Tank: 16 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 700xh410 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
Production capacity 130 kg (200 Lt)Flour capacity 86 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 230 rpm) & (Tank: 16 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 800xh430 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Production capacity 80 kg (130 Lt)Flour capacity 53 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 230 rpm) & (Tank: 16 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 700xh370 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
%
Oven "LENGTHWISE" loading plates GN 1/3 ,1/2, 2/3 et 1/1Standard with 1 grid GN 1/1Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges.Condensate harvest bowl, below the door.Halogen light.Door...
%
Electronic control panel with digital display"LENGTHWISE" oven loading plates GN 1/3, 1/2, 2/3 and 1/1Standard delivered with 1 grid GN 1/1Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and...
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 6 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R600a, drain for the condensate.Regulation by electronic thermostat (digital), Lighting by "LED". NB Provide discharge (or) a condensate drain pan.
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 8 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R134A, drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Adjustable feet.NB Provide discharge (or) a condensate drain pan.
%
2 plates Ø 230 mm, independent (2x 2.6 kW). Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), adjustable cylinders, waterproof "IPX4".Cast iron plates, with a stainless steel sealing edge. Regulation by 7-position switch.Appliances built in compliance with current standards (CE)
%
2 plates Ø 230 mm, independent (2x 2.6 kW). Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), adjustable cylinders, waterproof "IPX4".Cast iron plates, with a stainless steel sealing edge. Regulation by 7-position switch.Appliances built in compliance with current standards (CE)
%
- 2 plates 2,6 kW, diameter of 220 mm.- Manufactured in stainless steel 18/10 AISI 304, adjustable legs of stainless steel.- Hobs of cast iron, 220 mm diameter, with closing borders of stainless steel. Power regulation through a switch with 6 positions.
%
- 2 platen 2,4 kW, diameter of 220 mm.- Manufactured in stainless steel 18/10 AISI 304, adjustable legs of stainless steel.- Hobs of cast iron, 220 mm diameter, with closing borders of stainless steel. Power regulation through a switch with 6 positions.
%
2 plates, (2,6 kW), dimensions 220x220 mm.AISI 304 stainless steel construction, adjustable stainless steel cylinders.Pressed and sealed top (15/10 mm) in AISI 304 stainless steel.Rear chimney in AISI 304 stainless steel.Cast iron plates, with stainless steel sealing edge, safety device in case of overheating.Heating power regulation by means of a 7-position switch, front access for easy maintenance.
%
Right panel(s) in "toughened glass".Created for bakery, pastry, snack,...Stainless steel exposition plan AISI 304.Without storeroom.Worktop made of AISI 304 stainless steel.Series intermediary glass, with lighting type LED.Note : Plexiglass gates not included.
%
Right panel(s) in "toughened glass".Created for bakery, pastry, snack,...Stainless steel exposition plan AISI 304.Without storeroom.Worktop made of AISI 304 stainless steel.Series intermediary glass, with lighting type LED.Note : Plexiglass gates not included.
%
Meat capacity 25 to 35 kg, spit height 600 mm. Technical data : made in stainlessteel.Flexibility : Broiler zone individualy adjustable just to adapt cooking height.Sliding zone mounted on 4 ball bearings to adapt it to the meat thickness.Easy use : spit easely mounted due to a simple mechanical item.Long life : The spit base is fully hermetic so that the electric engine is protected against grease or gravy ,mounted on ball bearings it support easely weight of the meat and shocks Is protected...