%
2 drawers version GN 1/2+1/3 (maximum height 320 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Internal dimensions: 380x250xh63mm.Delivered with 3 tongs. Heating by quartz resistors (2 lower, 2 upper).Quartz protection grid (lower and upper).Timer from 0 to 15 minutes, coupled to a control lamp.Extractable bottom bowl.Made in stainless steel AISI 304.Cylinders at the base.Appliances built in compliance with the standards (CE) in force.
%
With "touch screen" embedded computerRealization in painted steel (epoxy paint), frontal realization in stainless steel AISI 304.* Washing machine (electric)Motorized closing of the porthole.Anti-balance control (no necessity for ground anchor)., multilingual, 200 memorizable programs (8 programmed from factory).Super spin-drying 1000 turns/min. (factor-G 300).Stainless steel tank and basket AISI 304.Residual humidity 50%.Connection cold or warm water.Upper basin with 3 compartments for...
%
Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built into the cabinet (right), ventilated condenser.Frontal accessibility of the compressor group, easy...
%
Internal dimensions : 2x 380x250xh63 mm.Delivered with 6 tongs. Heating by quartz resistors (2 lower, 2 in the middle and 2 upper).Quartz protection grid.Timer from 0 to 15 minutes, coupled to a control lamp, and selector for use 1 or 2 levels.Extractable bottom bowl.Made in stainless steel AISI 304.Cylinders at the base.Appliances built in compliances with the standards (CE) in force.
%
With "touch screen" embedded computerRealization in painted steel (epoxy paint), frontal realization in stainless steel AISI 304.* Washing machine (electric)Motorized closing of the porthole.Anti-balance control (no necessity for ground anchor)., multilingual, 200 memorizable programs (8 programmed from factory).Super spin-drying 1000 turns/min. (factor-G 300).Stainless steel tank and basket AISI 304.Residual humidity 50%.Connection cold or warm water.Upper basin with 3 compartments for...
%
2 drawers version GN 1/1max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet.Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
Independent selection of the 3 quartz ramps with 3 tubes: function toaster or salamander, without pre-heating, high output (400 toasts/hour).2 grids with thermal handles (1 with stainless steel closing).Realization in stainless steel.Floor space 510x320 mm.Heating by infrared "quartz" tubes.Quartz ramp selector, timer 15 min. with continuous position, tensioning warning light, heating warning light.Protection grids of the "quartz" tubes, dismountable (exclusive patent).Removable lower...
%
%
3 drawers versionGN 1/1 max. load Height 320 mm.2 ventilated evaporator "treaty".6 adjustable stainless steel feet.Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
Independent selection of the 2 quartz ramps with 3 tubes: function toaster or salamander, without pre-heating, high output (200 toasts/hour).2 grids with thermal handles.Realization in stainless steel.Floor space 510x320 mm.Heating by infrared "quartz" tubes.Quartz ramp selector, timer 15 min. with continuous position, tensioning warning light, heating warning light.Protection grids of the "quartz" tubes, dismountable (exclusive patent).Removable lower collection tank.Lift-off of the back...
%
With " touch screen" embedded computerRealization in painted steel (epoxy paint), frontal realization in stainless steel AISI 304.* Washing machine (electric)Motorized closing of the porthole.Anti-balance control (ground anchor not necessary).Multilingual, 200 memorizable programs (8 programmed from factory).Super spin-drying 1000 turns/min. (factor-G 300).Stainless steel tank and basket AISI 304.Residual humidity 50%.Cold or warm water connection.Upper basin with 3 compartments for washing...
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
With " touch screen" embedded computerRealization in painted steel (epoxy paint), frontal realization in stainless steel AISI 304.* Washing machine (electric)Motorized closing of the porthole.Anti-balance control (ground anchor not necessary).Multilingual, 200 memorizable programs (8 programmed from factory).Super spin-drying 1000 turns/min. (factor-G 300).Stainless steel tank and basket AISI 304.Residual humidity 50%.Cold or warm water connection.Upper basin with 3 compartments for washing...
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Version 2 drawers GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Version 8 drawers GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...