%
Universal degreasing and disinfecting detergent for professional use that eliminates all types of dirt on all surfaces in the kitchen; UNIV-SG is safe for users (Law 81/08 Ex 626) and effective for cleaning food contact equipment (HACCP).The formula is particularly rich, allows a very high dilution of the product whereas the absence of the mentions of danger on the label make the handling simple and safe.UNIV-SG is suitable for cleaning work surfaces, tiles, hoods and filters, refrigerator...
%
2 drawers version GN 1/2+1/3 (maximum height 320 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
- Frame version with wheels (with brakes).- Made of AISI 304 stainless steel.- Powerful, ventilated motor, drive by hermetic gear motor, under oil bath, double protection of liquids. - Ideal for hard mixes or salads (minimum load 40%).- Tank with double liquid protection, foldable (with lever), automatic locking and safety locking device.- Cover equipped with a safety microswitch.- 2 mixing arms (side by side), removable (without tools), easy maintenance.- Geared motor housed in the side...
%
Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built into the cabinet (right), ventilated condenser.Frontal accessibility of the compressor group, easy...
%
Table top model.Made of AISI 304 stainless steel.Powerful motor. The rotor works in oil-bath and it's equipped with a double sealing system.Safety microswitch on the cover.Removable AISI 304 stainless steel mixing arm (no tools required).Front outlet opening for shaft removal and product unload.IP 54 on/off switch with NVR (24 V) and reverse for a better mix.Machine produced in accordance with the actual CE standards.
%
2 drawers version GN 1/1max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
- Version on base with wheels (with brakes).- Made of AISI 304 stainless steel.- Powerful, ventilated, hermetically sealed gearmotor drive, under oil bath, double liquid protection.- Lid fitted with safety micro-switch.- Mixing arms can be removed (no tools required), easy maintenance.- Bowl opening on the side, for discharge of mixture and mixing arm.- 24 V controls (IP 54), with rotation inversion (better homogenization).
%
3 drawers version max. load Height 320 mm.2 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
- Chassis-mounted version with wheels (with brakes).- Made of AISI 304 stainless steel.- Powerful, ventilated motor, hermetically sealed gear motor drive, under oil bath, double liquid protection. - Ideal for hard mixes or salads (minimum load 40%).- Bowl with double liquid protection, hinged (with lever), automatic locking and safety locking device.- Lid fitted with safety microswitch.- 2 mixing arms (side by side), removable (no tools required), easy maintenance.- Geared motor housed in...
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Version 2 drawers GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Version 8 drawers GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
2 drawers version GN 1/2+1/3 (Max. load height 300 mm).1 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 304 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 5 (40°C Temperature & 40% Humidity),...
%
Version with 3 GN 1/2 + 1/3 drawers (Max. load height 300 mm).1 ventilated "treated" evaporator.6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 304 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 5 (40°C Temperature & 40%...
%
2 drawers version GN 1/1 (max. load Height 300 mm).1 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque design.Interior and exterior (including top) in AISI 304 stainless steel (food-grade) (rear also).Deep-drawn inner bottom and rounded corners and edges (no rough edges).Drawers with ergonomic handles, on telescopic slides, magnetic pressure seals (easy replacement, no tools required), electric resistance on counter-doors, allowing drawers to be opened.Class 5...
%
3 drawers version GN 1/1 (max. load Height 300 mm).2 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque design.Interior and exterior (including top) in AISI 304 stainless steel (food-grade) (rear also).Deep-drawn inner bottom and rounded corners and edges (no rough edges).Drawers with ergonomic handles, on telescopic slides, magnetic pressure seals (easy replacement, no tools required), electric resistance on counter-doors, allowing drawers to be opened.Class 5...
%
2 drawers version GN 1/1 (max. load Height 300 mm).1 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque design.Inside and outside (top included) manufactured in stainless steel AISI 304 (also the back).Stamped interior bottom, rounded angles and corners (no rough edges).Drawers with ergonomic handles, on telescopic runners, closed by magnetic pressure seals (easy replacement, no tools required).Class 5 compressor unit (40°C Temperature & 40% Humidity), built into...
%
4 drawers version GN 1/1 (max. load Height 110 mm).1 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque design.Inside and outside (top included) manufactured in stainless steel AISI 304 (also the back).Stamped interior bottom, rounded angles and corners (no rough edges).Drawers with ergonomic handles, on telescopic runners, closed by magnetic pressure seals (easy replacement, no tools required).Class 5 compressor unit (40°C Temperature & 40% Humidity), built into...
%
3 drawers version GN 1/1 (max. load Height 300 mm).1 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque design.Inside and outside (top included) manufactured in stainless steel AISI 304 (also the back).Stamped interior bottom, rounded angles and corners (no rough edges).Drawers with ergonomic handles, on telescopic runners, closed by magnetic pressure seals (easy replacement, no tools required).Class 5 compressor unit (40°C Temperature & 40% Humidity), built into...
%
6 drawers version GN 1/1 (max. load Height 110 mm).1 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque design.Inside and outside (top included) manufactured in stainless steel AISI 304 (also the back).Stamped interior bottom, rounded angles and corners (no rough edges).Drawers with ergonomic handles, on telescopic runners, closed by magnetic pressure seals (easy replacement, no tools required).Class 5 compressor unit (40°C Temperature & 40% Humidity), built into...
%
Version 4 drawers GN 1/1 (max. load Height 300 mm).2 ventilated evaporators "treaty".8 adjustable stainless steel feet. Monocoque design.Inside and outside (top included) manufactured in stainless steel AISI 304 (also the back).Stamped interior bottom, rounded angles and corners (no rough edges).Drawers with ergonomic handles, on telescopic runners, closed by magnetic pressure seals (easy replacement, no tools required).Class 5 compressor unit (40°C Temperature & 40% Humidity), built into...