Sliding doors3 adjustable shelves Adjustable feet
%
- Tunnel: width 300 mm, depth 370 mm, height from 70 to 110 mm.- Instant start, without preheating thanks to infrared quartz. - Adjustment of the rotational speed and the power of the heater (half or full power). - Reflectors at the entrance and at the exit of the tunnel to concentrate the temperature in the cooking chamber and reduce cooking time (1'30 on average).- Long duration use thanks to the ventilated engine. - 8 quartz tubes (top 1500 W, bottom 1450 W), heater selector. - Front and...
%
%
2 drawers version GN 1/2+1/3 (maximum height 320 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
All AISI 304L stainless steelDouble hinged doors for better cabinet stability and rigidity1 lock and 1 handle per doorLoad per shelf: 50 kg distributedCupboards with 1 hinged door - Width 475 mmLegs: black composite Ø 40, height 155 mm, adjustable over 70 mmNot available on castersFront height: 1810 mmLeft hinges1-door models not available on castersCabinets with 2 hinged doors - Width 475 mmLegs: black composite Ø 40, height 155 mm, adjustable over 70 mmPolyamide casters: 4 including 2 with...
%
%
Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built into the cabinet (right), ventilated condenser.Frontal accessibility of the compressor group, easy...
All stainless steel AISI 441 (F18)pitched roofDouble hinged doors for better cabinet stability and rigidity1 lock and 1 handle per doorLoad per shelf: 50 kg distributedCupboards with 1 hinged door - Width 475 mmLegs: black composite Ø 40, height 155 mm, adjustable over 70 mmFront height: 1805 mmLeft hinges1-door models not available on casters
%
Heavy-duty model.AISI 304 stainless steel construction comes with standard stainless steel legs with wheels.IP 55 fan-cooled motor for continuous use.Oil-bath reducer with hardened gears and double seal to prevent leakage between the head and the motor.AISI 304 stainless steel grinding head is completely removable without tools for easy cleaning.Removable AISI 304 stainless steel feed tray with square feeding neck that allows for faster processing cycles.Stainless steel IP 67 24 V on/off...
%
2 drawers version GN 1/1max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
All stainless steel AISI 441 (F18)pitched roofDouble hinged doors for better cabinet stability and rigidity1 lock and 1 handle per doorLoad per shelf: 50 kg distributedCupboards with 1 hinged door - Width 475 mmLegs: black composite Ø 40, height 155 mm, adjustable over 70 mmFront height: 1805 mmLeft hinges1-door models not available on casters
%
With protection on the head of the mincer, for working with greater than 8 mm Ø grids (10-12 ...)Designed for high productivity.AISI 304 stainless steel chassis (washable with water jet), standard on stainless steel base with wheels fitted with brakes.Ventilated motor (IP 55 ) designed for intensive use. Driven by hermetically sealed gear motor, under oil bath, double liquid protection (between mincer head and motor).Mincer head in AISI 304 stainless steel, quick bayonet fixing device (no...
%
3 drawers version max. load Height 320 mm.2 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
Cabinets with 2 hinged doors - Width 475 mmLegs: black composite Ø 40, height 155 mm, adjustable over 70 mmStainless steel casters: 4 including 2 with brakesCabinets with 2 hinged doors - Width 600 mmLegs: black composite Ø 40, height 155 mm, adjustable over 70 mmStainless steel casters: 4 including 2 with brakes
%
With adapter for hamburger device.Designed for high productivity.AISI 304 stainless steel chassis (washable with water jet), standard on stainless steel base with wheels fitted with brakes.Ventilated motor (IP 55 ) designed for intensive use.Driven by hermetically sealed gear motor, under oil bath, double liquid protection (between mincer head and motor).Mincer head in AISI 304 stainless steel, quick bayonet fixing device (no tools required), completely dismountable, easy and hygienic...
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
Top: AISI 304L stainless steel, reinforced with a glued panel in 19 mm thick melamine,With special side profiles for slide1 stainless steel grid GN2/1 sliding on 2 polyethylene padsWelded base in AISI 304L stainless steel tube, 35 x 35 mm, and 35 x 20 mm on 4 polyamide swivel casters Ø 125 mm, 2 of which have brakesThe "Plus product"Hygiene, solidity and ergonomics are the main assets of this table, specially designed to dress in series appetizers, salads and pastries.Mounted on wheels, this...
%
With protection on the head of the mincer, for working with greater than 8 mm Ø grids (10-12 ...)Designed for high productivity.AISI 304 stainless steel chassis (washable with water jet), standard on stainless steel base with wheels fitted with brakes.Ventilated motor (IP 55 ) designed for intensive use.Driven by hermetically sealed gear motor, under oil bath, double liquid protection (between mincer head and motor).Mincer head in AISI 304 stainless steel, quick bayonet fixing device (no...
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
2 removable, adjustable and reinforced intermediate shelves.Sliding doors (double wall), integrated handle.Made of AISI 441 stainless steel (brushed finish).Stainless steel feet with adjustable cylinders.
%
With adapter for hamburger device.Designed for high productivity.AISI 304 stainless steel chassis (washable with water jet), standard on stainless steel base with wheels fitted with brakes.Ventilated motor (IP 55 ) designed for intensive use.Driven by hermetically sealed gear motor, under oil bath, double liquid protection (between mincer head and motor).Mincer head in AISI 304 stainless steel, quick bayonet fixing device (no tools required), completely dismountable, easy and hygienic...
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Strengthened base intermediary shelves, removable and adjustable.Sliding doors with immersed handles.Manufactured in stainless steel AISI 304 (brushed finish).Adjustable stainless steel legs.
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...