%
Mixer with big flow: 35 liters/min.Output one hole 3/4" (Ø 29 mm).Wall attachment 115 mm.Flexible 1200-mm length.Flow of the nozzle 16 liters/min.
%
Flow rate (pressure 3 bar) tap 8 litres/minute, hand shower 12 litres/minute.Standard non-return valve (EN 1717 Belgaqua standard).Hand shower hose 60 mm (DVGW standards).Single hole outlet Ø min.27/max.35, thread length 50 mm, flexible hose G 3/8 female.Maximum pressure 10 bar (recommended 1-6 bar) and maximum temperature 90°C bar (recommended 90°C).
%
%
Mixer with big flow: 30 lit./min.Swan neck tap Ø 20 mm.Sprinkler length 1000 mm, wall attachment.Faucet flow 10 lit./min.Output one hole attachment (Ø 35 mm).
%
Flow rate (pressure 3 bar) tap 45 litres/minute, hand shower 16 litres/minute.Non-return valve as standard (standard EN 1717 Belgaqua.)Wall bracket 150 mmGooseneck Ø 25 mm (L.250mm).Hand shower hose 1050 mm (DVGW standards).Single hole outlet Ø min.27/max.35, thread length 80 mm, hoses G 1/2 femaleMaximum pressure 6.5 bar and maximum temperature 65°C bar.
%
Tap, flow: 18 liters/min.Output one hole 3/4" (Ø 29 mm).Wall attachment 115 mm.Flexible 1050-mm length.Flow of the nozzle 16 liters/min.
%
For motor type:7/7/14 - 9/9/9 - 9/9/14 - 10/10/9 - 10/10/14.On/Off switch and potentiometer speed variatorOn/Off lighting switch.
%
For motor type:12/9/9 - 12/12/9.On/Off switch and potentiometer speed variator.On/Off lighting switch.
%
%
Voor ventilator motor van het type:9/9/14 - 12/9/9.- On / off schakelaar en snelheid variator door potontiometer.
%
%
Voor ventilator motor van het type:7/7/14 - 9/9/9 - 10/10/9 - 10/10/14.- On / off schakelaar en snelheid variator door potontiometer.
%
For motor: CVX/4T - CVX/6T - CVX/8TSuitable for indoor use, IP20 protection ratingExternal control terminal. Control panel with digital screen.Three-phase input / three-phase output (3x400V / 3x400V).EMC filter (electromagnetic compatibility).Input frequency: 48-62 Hz, output frequency: 0-500 Hz.Accepts an overload of 150% for 60 seconds (175% for 2.5 seconds).Intensive operation up to an ambient temperature of -20° to +50°C (storage temperature: -40° to +60°C).Quick commissioning.Basic...
%
For motor: CVX/4T - CVX/6T - CVX/8TSuitable for outdoor use, IP66 protection rating // NEMA 4X resistant to ultraviolet (UV) rays, grease, oil, and acids.Potentiometer for speed control.Forward/reverse selector.Power disconnect switch. Control panel with digital screen.Three-phase input / three-phase output (3x400V / 3x400V).EMC filter (electromagnetic compatibility).Input frequency: 48-62 Hz, output frequency: 0-500 Hz.Accepts an overload of 150% for 60 seconds (175% for 2.5...
%
For motor type variator : CA7/7/15 - CA9/7/25 - CVX/2M - CVX/4M - CVX/6M.Protection class: IP55Maximum motor power absorption: 4.5AMaximum light power absorption: 5A Variator for motor, light, and solenoid valve control.On/off switch and speed variator with potentiometer.On/off switch for lighting.Management of gas solenoid valve (230V/1N-50Hz, max. 1A)Protection fuse and speed calibration potentiometers MIN & MAX.
%
For motor type: CA10/8/30 - CA12/12/45 - CVX/8M.Protection class: IP50Maximum motor power absorption: 8AMaximum light power absorption: 5A Variator for motor, light, and solenoid valve control.On/off switch and speed variator with potentiometer.On/off switch for lighting.Management of gas solenoid valve (230V/1N-50Hz, max. 1A)Protection fuse and speed calibration potentiometers MIN & MAX.
%
Made of ABS, easily removable tank, easy cleaning. Ventilated motor 2800 rpm.Standard 1 smooth knife and a mixer in ABS.Safety micro-switch.Lid in transparent Lexan, the addition of ingredients is possible thanks to a hole on the lid.Scraper as standard.Low voltage 24V controls, protection class (IP67), NVR (No-Voltage Release).
%
For motor type variator: CA7/7/15 - CA9/7/25 - CVX/2M - CVX/4M - CVX/6M.Protection class: IP55Maximum motor power absorption: 4.5A Variator for motor and solenoid valve control.On/off switch and speed variator with potentiometer.Management of gas solenoid valve (230V/1N-50Hz, max. 1A)Protection fuse and speed calibration potentiometers MIN & MAX.
%
Turns per minute: 2600 rpm.Tank capacity: 3,3 Lt.Useful tank capacity: 1,5 Lt. Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High safety guaranteed by a double micro-switch on the lid.Lid in...
%
For motor: CA10/8/30 - CA12/12/45 - CVX/8MProtection class: IP50Maximum motor power absorption: 8A Variator for motor and solenoid valve control.On/off switch and speed variator with potentiometer.Management of gas solenoid valve (230V/1N-50Hz, max. 1A)Protection fuse and speed calibration potentiometers MIN & MAX.
%
- Turns/minute: rpm 145.- Duration of the production cycle 90-120 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control panel...
%
Table top model.Made of AISI 304 stainless steel.Powerful motor. The rotor works in oil-bath and it's equipped with a double sealing system.Safety microswitch on the cover.Removable AISI 304 stainless steel mixing arm (no tools required).Front outlet opening for shaft removal and product unload.IP 54 on/off switch with NVR (24 V) and reverse for a better mix.Machine produced in accordance with the actual CE standards.
%
Turns/minute: Rpm 270.Duration of the production cycle 60-90 sec.Color BLACK. Stainless steel undercarriage AISI 304.Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges.Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor).Digital control panel (placed at the...
%
Designed in stainless steel.ON/OFF switch.Shielded steel element heating.Strengthened protection cables for a better security, without affecting the heat distributionLateral supports for heating bridge.Chromium-plated feet, in the shape of "C".Free space underneath the heating bridge: 343 mm.