%
- Water condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 60/120 litres. - Cycle time: 100/120 min.
%
- Water condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 60/120 litres. - Cycle time: 100/120 min.
%
Mixer with big flow: 35 liters/min.Output one hole 3/4" (Ø 29 mm).Wall attachment 115 mm.Flexible 1200-mm length.Flow of the nozzle 16 liters/min.
%
Flow rate (pressure 3 bar) tap 8 litres/minute, hand shower 12 litres/minute.Standard non-return valve (EN 1717 Belgaqua standard).Hand shower hose 60 mm (DVGW standards).Single hole outlet Ø min.27/max.35, thread length 50 mm, flexible hose G 3/8 female.Maximum pressure 10 bar (recommended 1-6 bar) and maximum temperature 90°C bar (recommended 90°C).
%
%
Mixer with big flow: 30 lit./min.Swan neck tap Ø 20 mm.Sprinkler length 1000 mm, wall attachment.Faucet flow 10 lit./min.Output one hole attachment (Ø 35 mm).
%
Flow rate (pressure 3 bar) tap 45 litres/minute, hand shower 16 litres/minute.Non-return valve as standard (standard EN 1717 Belgaqua.)Wall bracket 150 mmGooseneck Ø 25 mm (L.250mm).Hand shower hose 1050 mm (DVGW standards).Single hole outlet Ø min.27/max.35, thread length 80 mm, hoses G 1/2 femaleMaximum pressure 6.5 bar and maximum temperature 65°C bar.
%
Tap, flow: 18 liters/min.Output one hole 3/4" (Ø 29 mm).Wall attachment 115 mm.Flexible 1050-mm length.Flow of the nozzle 16 liters/min.
%
Ventilated motor with thermal protection. Ventilated engine.Frame, upper and retrieval basin in stainless steel AISI 304.Chopper group removable, (Ø 98 mm) (easy maintenance), possibility to inverse rotation (if blocked). Grid of 6mm and knife in stainless steel "self sharpening".Drive gears in oil bath, made for intensive use.Control (24 V), thermic protection.
%
The outer frame is made of "aluminum alloy".The body of the chopper as well as the internal auger are also made of "aluminium alloy" treated for food and stainless steel, all the internal parts are easily dismantled for an easy maintenance.Upper bowl in stainless steel AISI 304.Supplied as standard with 6 mm grid.Self-sharpening stainless steel grid and knife.Gear drive in oil bath.Low voltage control 24 V.Supplied with a stainless steel AISI 304 container to collect the minced meat.The...
%
Ventilated motor with thermal protection. Exterior chassis in "aluminum alloy".The body of the chopper and the inside out leadscrew are also manufactured in treated "aluminum alloy" for food and stainless steel, all the interior parts are easily dismantled allowing easy maintenance.Upper bowl in stainless steel AISI 304.Standard delivered with a 6 mm grid.Grid and blade in stainless steel "auto-sharping".Ventilated motor, ideally designed for intensive use.Wheel drive in oil bath.Low voltage...
%
Exterior chassis in "aluminum alloy".The body of the chopper and the inside out leadscrew are also manufactured in treated "aluminum alloy" for food and stainless steel, all the interior parts are easily dismantled allowing easy maintenance.Upper bowl in stainless steel AISI 304.Standard delivered with a 6 mm grid.Grid and blade in stainless steel "auto-sharping".Wheel drive in oil bath.Low voltage control 24V.Aplliances are in compliance with standards (CE) in force.
%
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1.Standard supplied with 2 grids GN 1/1. Compact, space-saving ovensDirect steam by "nebulisation".Convection heating: by means of shielded stainless steel resistors placed behind the turbine deflector.Depth loading, spacing 67 mm.Easy servicing, access to controls from the sideHinged turbine deflector, easy...
%
Oven "LENGTHWISE" loading plates GN 1/3 ,1/2, 2/3 et 1/1Standard with 1 grid GN 1/1Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges.Condensate harvest bowl, below the door.Halogen light.Door...
%
Oven "LENGTHWISE" loading plates GN 1/3, 1/2 and 2/3Standard with 1 GN Grid 2/3Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges.Condensate harvest bowl, below the door.Halogen light.Door with...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard delivered with 1 grid GN 1/1 Compact, space-saving ovensDirect steam by "nebulisation".Convection heating: by means of shielded stainless steel resistors placed behind the turbine deflector.Depth loading, spacing 67 mm.Easy servicing, access to controls from the sideHinged turbine deflector, easy...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1.Standard supplied with 2 grids GN 1/1. Compact ovens, don't take a lot of place.Direct steam generation through "nebulization".Convection heating: by a gas burner (PREMIX SYSTEM) placed in the room, behind the turbine deflector.In-depth loading 67 mm.Rotating and removable hinged air conveyor, easy cleaning.Cooking...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard delivered with 1 grid GN 1/1 Compact, space-saving furnacesDirect steam by "nebulization"Convection heating: by a gas burner (PREMIX SYSTEM) placed in the chamber, behind the turbine deflector.Depth loading, spacing 67 mmEasy after-sales service, access to controls from the side partHinged turbine deflector, easy...
%
Flow rate (pressure 3 bar) tap 14 litres/minute, hand shower 12 litres/minute.Standard non-return valve (EN 1717 Belgaqua standard).Hand shower hose 40 mm.Single hole outlet Ø min.31/max.35, thread length 50 mm, flexible hose G 1/2 female.Maximum pressure 6 bar (recommended 1-6 bar) and maximum temperature 80 °C bar.
%
Ceramic mixer 17 liters/minute (14 liters/minute spout only / 17 liters/minute spout + handshower).Swan neck tap Ø 20 mm.Sprinkler length 2000 mm, wall attachment.Faucet flow 11 lit./min (3,5bar). Output one hole attachment 3/4'' (Ø 35 mm).
%
Tap, flow: 18 liters/min.Output one hole 3/4" (Ø 29 mm).Wall attachment 135 mm.Flexible 1000-mm length.Flow of the nozzle 12 liters/min.
%
Oven "LENGHTWISE" loading plates GN 1/3 ,1/2 , 2/3 and 1/1Standard supplied with 2 grids GN 1/1.Compact ovens.With standard humidifier.Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges, predisposed for grease filter.Integrated...
%
Oven "LENGHTWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard supplied with 2 grids GN 1/1.Stainless steel base, standard supplied.Compact ovens.With standard humidifier.Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges,...