%
With "touch screen" embedded computerRealization in painted steel (epoxy paint), frontal realization in stainless steel AISI 304.* Washing machine (electric)Motorized closing of the porthole.Anti-balance control (no necessity for ground anchor)., multilingual, 200 memorizable programs (8 programmed from factory).Super spin-drying 1000 turns/min. (factor-G 300).Stainless steel tank and basket AISI 304.Residual humidity 50%.Connection cold or warm water.Upper basin with 3 compartments for...
%
Superior top 1.5 mm, rounded edges 70 mm.Pressed tank GN200 mm, corners rounded, drainage and overflow.Water level in the basin controlled by electro valve.Electric heating by element sited under tank.Ventilated cupboard, heated by electric element.Made in stainless steel with adjustable feet in stainless steel 150 mm.
%
%
%
%
Realisation "double walled".Loading height for trays 650mmCID door (double wall) with automatic closing "soft contact" (partial opening for steam evacuation)Double door guillotine (isolated double wall) and counterbalanced.Standard rinsing pump (atmospheric boiler)Cycles 120''- 240'' - 360'' or continuous.Rotating washing and rinsing arms.Self-cleaning nozzles.Deep-drawn walls.Adjustable stainless steel feet (160-220 mm).Removable control panel.USB" port for software update.Pump increasing...
%
- Water condenser.- Vertical turbine with automatic extraction. - Minimum mixing capacity 7 lit. and maximum 12 lit. - Noise level below 70 dB. - Vertical evaporator cylinders for a larger exchange surface. - Cycle with time control or temperature control. - Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 75 litres. NB: mainly for cold work.
%
- Water condenser.- Vertical turbine with automatic extraction. - Minimum mixing capacity 7 lit. and maximum 12 lit. - Noise level below 70 dB. - Vertical evaporator cylinders for a larger exchange surface. - Cycle with time control or temperature control. - Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 75 litres. NB: mainly for cold work.
%
Chambers: 2x 620x500x120 mm.Thermostatic control of the two chambers by 3 thermostats.Front side aesthetics "RUSTIQUE", made in high temperature painted steel, chassis in painted sheet.Chamber with top stainless steel arcade, avoiding the heat from going out when opening the door.Galvanised steel chamber, bottom in "special" refractory material.Door with heatless handle.Inner chamber light (except E3F/24R).Heating by top and bottom electric armoured elements, setting by thermostats (50 to...
%
Production capacity 100 kg (160 Lt)Flour capacity 66 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 230 rpm) & (Tank: 16 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 700xh410 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
Production capacity 130 kg (200 Lt)Flour capacity 86 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 230 rpm) & (Tank: 16 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 800xh430 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
Production capacity 80 kg (130 Lt)Flour capacity 53 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 230 rpm) & (Tank: 16 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 700xh370 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
Oven "LENGTHWISE" loading plates GN 1/3 ,1/2, 2/3 et 1/1Standard with 1 grid GN 1/1Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges.Condensate harvest bowl, below the door.Halogen light.Door...
%
Electronic control panel with digital display"LENGTHWISE" oven loading plates GN 1/3, 1/2, 2/3 and 1/1Standard delivered with 1 grid GN 1/1Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and...
%
4 independent square plates (3x 3 kW, 1x 4 kW).Oven (10 kW) GN 2/1 (540x940xh300 mm) Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in stainless steel AISI 304.Square plates in cast iron, 300x300 mm, with a waterproof stainless steel edge, safety device in case of overheating. Regulation of the heating power with a 7-position switch, frontal accessibility allowing a very easy maintenance.
%
2 plates Ø 230 mm, independent (2x 2.6 kW). Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), adjustable cylinders, waterproof "IPX4".Cast iron plates, with a stainless steel sealing edge. Regulation by 7-position switch.Appliances built in compliance with current standards (CE)
%
2 plates Ø 230 mm, independent (2x 2.6 kW). Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), adjustable cylinders, waterproof "IPX4".Cast iron plates, with a stainless steel sealing edge. Regulation by 7-position switch.Appliances built in compliance with current standards (CE)
%
Refrigerant expansion R290.Internal dimensions: 890x510xh665 mm.Temperature: -15° -25°.Supplied as standard with 1 basket. External construction in white lacquered sheet steel.Sliding covers, natural aluminium frame, Thermopane® windows.Key lock (standard).Mechanical thermostat, T° -15° -25°. Analog thermometer, for displaying the internal temperature.On/Off switch.Hermetic unit for ambient temperature +32°C, ventilated condenser.Static evaporator, placed in the "coil" walls.Manual...
%
Cooking surface 344x647 mm, 22.26 dm2.Regulation from 120°C to 280°C, safety thermostat Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Inclined cooking plate with high thermal conductivity, welded peripheral edge for perfect waterproofing. Drawer for collecting cooking juice (3 litres).Electric heating by stainless steel resistors, placed under the plate.Appliances built in compliance with current standards (CE)
%
Cooking surface 330x700 mm, 23.10 dm2.Regulation from 120°C to 280°C, safety thermostat Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), levelling cylinders, waterproof "IPX5".Inclined cooking plate in brushed treated steel (Certified food-grade according to European regulation CE n.1935/2004) with high thermal conductivity, made in one piece with the TOP itself, 100% hygiene guaranteed.Drawer for collecting cooking juice (3 litres).Electric heating by stainless steel resistors,...
%
Cooking surface 344x647 mm, 22.26 dm2.Regulation from 120°C to 280°C, safety thermostat Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Inclined cooking plate with high thermal conductivity, welded peripheral edge for perfect waterproofing. Drawer for collecting cooking juice (3 litres).Electric heating by stainless steel resistors, placed under the plate.Appliances built in compliance with current standards (CE)
%
Cooking surface 330x700 mm, 23.10 dm2.Regulation from 120°C to 280°C, safety thermostat Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), levelling cylinders, waterproof "IPX5".Inclined cooking plate in brushed treated steel (Certified food-grade according to European regulation CE n.1935/2004) with high thermal conductivity, made in one piece with the TOP itself, 100% hygiene guaranteed.Drawer for collecting cooking juice (3 litres).Electric heating by stainless steel resistors,...
%
Useful dimensions of the cooking surface 344x647 mm, 22.26 dm2.With hard chrome plate.Regulation from 120°C to 280°C, safety thermostat Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th), levelling cylinders, waterproof "IPX5".Inclined cooking plate with high thermal conductivity (Certified food-grade according to European regulation CE n.1935/2004), welded peripheral edge for perfect waterproofing. Drawer for collecting cooking juice (3 litres).Electric heating by stainless steel...
%
Useful dimensions of the cooking surface 344x647 mm, 22.26 dm2.With hard chrome plate.Regulation from 120°C to 280°C, safety thermostat Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th), levelling cylinders, waterproof "IPX5".Inclined cooking plate with high thermal conductivity (Certified food-grade according to European regulation CE n.1935/2004), welded peripheral edge for perfect waterproofing. Drawer for collecting cooking juice (3 litres).Electric heating by stainless steel...