%
Wall-mounted model, placed at a height of 1.50 m from the ground.Automatic rewind system.Pistol and trigger handle with no-drip system.Maximum operating pressure of 8.5 bar and temperature 60°C.Water flow rate 12 litres/min.Bodywork in 18/10 stainless steel AISI 304 (brushed finish).NB: supplied without "mixing valve" connection.
%
Manufactured in stainless steel 18/10 AISI 304.Cover in stainless steel, opening with pedal.
%
Realization: Stainless steel frame.Electric Heating: Heating by regulator of energy of 0 with 90°C.Control of moisture and the temperature.Maintenance: The drawer is removable and the gastronorm pan GN 2/3 is machine washable.
%
Grill with rollers.Frame in stainless steel.Till 16 sausages pre-cooked means 90 hot dogs/hour.Regular cooked without grease.Electrical heating: by means of armoured elements of each 125 W inside the chrome rolls.Heating surface : 430mm large, energy regulator from 0 till 300°C.High performance engine special asyncrome with speed reducer.Collector underneath, catches up gravy and to be placed under the grill.Breadrolls warmer.Frame made of stainless steel.Electrical heating warms up by energy...
%
%
Technical : Sausage grill with rollersChassis in stainless steelTill 16 sausages pre-cooked means 90 hot dogs/hourRegular cooked without greaseElectrical heating: by means of armoured elements of each 125 w inside the chrome rolls Heating surface : 430mm large, energy regulator from 0 till 300°CHigh performance engine special asyncrome with speed reducerCollector underneath, catches up gravy and to be placed under the grillBuns warmerChassis made of stainless steelElectrical heating warms up...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1.Standard supplied with 2 grids GN 1/1. Compact, space-saving ovensDirect steam by "nebulisation".Convection heating: by means of shielded stainless steel resistors placed behind the turbine deflector.Depth loading, spacing 67 mm.Easy servicing, access to controls from the sideHinged turbine deflector, easy...
%
Oven "LENGTHWISE" loading plates GN 1/3 ,1/2, 2/3 et 1/1Standard with 1 grid GN 1/1Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges.Condensate harvest bowl, below the door.Halogen light.Door...
%
Oven "LENGTHWISE" loading plates GN 1/3, 1/2 and 2/3Standard with 1 GN Grid 2/3Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges.Condensate harvest bowl, below the door.Halogen light.Door with...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard delivered with 1 grid GN 1/1 Compact, space-saving ovensDirect steam by "nebulisation".Convection heating: by means of shielded stainless steel resistors placed behind the turbine deflector.Depth loading, spacing 67 mm.Easy servicing, access to controls from the sideHinged turbine deflector, easy...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1.Standard supplied with 2 grids GN 1/1. Compact ovens, don't take a lot of place.Direct steam generation through "nebulization".Convection heating: by a gas burner (PREMIX SYSTEM) placed in the room, behind the turbine deflector.In-depth loading 67 mm.Rotating and removable hinged air conveyor, easy cleaning.Cooking...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard delivered with 1 grid GN 1/1 Compact, space-saving furnacesDirect steam by "nebulization"Convection heating: by a gas burner (PREMIX SYSTEM) placed in the chamber, behind the turbine deflector.Depth loading, spacing 67 mmEasy after-sales service, access to controls from the side partHinged turbine deflector, easy...
%
- 4 independent plates, Ø 180 mm (4x 2 kW). - Electric convection oven GN 2/3 (3 kW), 370x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- 4 independent plates, Ø 180 mm (4x 2 kW). - Electric convection oven GN 2/3 (3 kW), 370x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- 5 independent plates, Ø 180 mm (5x 2 kW). - Electric convection oven GN 1/1 (3 kW), 530x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- 5 independent plates, Ø 180 mm (5x 2 kW). - Electric convection oven GN 1/1 (3 kW), 530x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- 4 separate hobs (4x 2,6 kW).- Electric convection oven 5xGN 1/1 (3,96 kW), dimensions 530x340xh325 mm.- Manufactured in stainless steel 18/10 AISI 304, adjustable legs of stainless steel.- Oven room and double glazed door provided with thermic spun glass isolation. Hinged oven door with spring system, grip in stainless steel.- Hobs of cast iron, 220 mm diameter, with closing borders of stainless steel. Power regulation through a switch with 6 positions.- Electric convection oven GN 1/1,...
%
4 separate hobs (4x 2,6 kW).Electric convection oven 5xGN 1/1 (3,96 kW), dimensions 530x340xh325 mm. Manufactured in stainless steel 18/10 AISI 304, adjustable legs of stainless steel.Oven room and double glazed door provided with thermic spun glass isolation. Hinged oven door with spring system, grip in stainless steel.Hobs of cast iron, 220 mm diameter, with closing borders of stainless steel. Power regulation through a switch with 6 positions.Electric convection oven GN 1/1, heating...
%
Oven "LENGHTWISE" loading plates GN 1/3 ,1/2 , 2/3 and 1/1Standard supplied with 2 grids GN 1/1.Compact ovens.With standard humidifier.Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges, predisposed for grease filter.Integrated...
%
Oven "LENGHTWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard supplied with 2 grids GN 1/1.Stainless steel base, standard supplied.Compact ovens.With standard humidifier.Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges,...
%
Oven "LENGHTWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard supplied with 1 grid GN 1/1.Compact ovens.With standard humidifier.Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges, predisposed for grease filter.Integrated...
%
4x GN2/3 (353x325 mm)Standard supplied with 1 grid GN 2/3.1 Turbine "autorevers"Heating by stainless steel armoured resistance(s), placed behind the deflector and "direct" steam by "nebulisation".Depth loading, GN plates 1/3 - 1/2 - 2/3 - 1/1, removable plate holder structure, 67 mm spacing.Easy after-sales service, front access.Baking chamber in AISI 304 stainless steel, rounded corners and corners (easy maintenance), deep-drawn bottom with discharge.Integrated condensate collection tray (on...
%
7x GN 1/1 (530x325 mm)Standard supplied with 1 grid GN 1/1.1 Turbine "autorevers"Heating by stainless steel armoured resistance(s), placed behind the deflector and "direct" steam by "nebulisation".Depth loading, GN plates 1/3 - 1/2 - 2/3 - 1/1, removable plate holder structure, 67 mm spacing.Easy after-sales service, front access.Baking chamber in AISI 304 stainless steel, rounded corners and corners (easy maintenance), deep-drawn bottom with discharge.Integrated condensate collection tray...
%
- 4 burners (2x 3.3 kW and 2x 3.6 kW). - Electric convection oven GN 2/3 (3 kW), 370x340xh325 mm).- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Burners with "high efficiency" brass crowns, regulation by gas valve. Upper grids in enamelled cast iron. - Electric convection oven (GN), in stainless steel,...