%
%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
Made of "anodized aluminum", food treated.Blade in stainless steel AISI 304.Sliding carriage with transparent Plexiglas protection.Cutting capacity : 200x260 mm.Sharpening device, delivered separately, with adapter.Cutting adjustment from 0-15 mm.Easily removable blade guard.No volt release" device that prevents the machine from starting during the cleaning phase.Low voltage control 24 V, protection class IP65.Safety microswitch on the blade.Blade cover ring (100% protection).The machine is...
%
- Traction of the blade with manuel wheel (no electricity supply).- Blade in stainless steel AISI 304, automatic sharpening integrated.- Integrated blade protection (CEE standard).- Cut capacity 230x190 mm, cut adjustment from 0-8 mm, trajectory of carriage 230 mm, plate 240x275 mm.- Realisation in cast iron (bright red) and anodized aluminium.
%
%
Made of food-safe "anodized aluminum".Hardened, chrome-plated steel blade.Easily removable sliding carriage with transparent Plexiglas guard.Cutting capacity: 200x260 mm.Built-in automatic sharpening.Cutting range 0-15 mm.Easily removable blade guard.“No volt release" device prevents machine start-up during cleaning phase.24 V low-voltage control, IP65 protection.Safety microswitch on blade.Blade cover ring (100% protection).Built in compliance with current CE standards.
%
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1.Standard supplied with 2 grids GN 1/1. Compact, space-saving ovensDirect steam by "nebulisation".Convection heating: by means of shielded stainless steel resistors placed behind the turbine deflector.Depth loading, spacing 67 mm.Easy servicing, access to controls from the sideHinged turbine deflector, easy...
%
Oven "LENGTHWISE" loading plates GN 1/3 ,1/2, 2/3 et 1/1Standard with 1 grid GN 1/1Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges.Condensate harvest bowl, below the door.Halogen light.Door...
%
Oven "LENGTHWISE" loading plates GN 1/3, 1/2 and 2/3Standard with 1 GN Grid 2/3Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges.Condensate harvest bowl, below the door.Halogen light.Door with...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard delivered with 1 grid GN 1/1 Compact, space-saving ovensDirect steam by "nebulisation".Convection heating: by means of shielded stainless steel resistors placed behind the turbine deflector.Depth loading, spacing 67 mm.Easy servicing, access to controls from the sideHinged turbine deflector, easy...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1.Standard supplied with 2 grids GN 1/1. Compact ovens, don't take a lot of place.Direct steam generation through "nebulization".Convection heating: by a gas burner (PREMIX SYSTEM) placed in the room, behind the turbine deflector.In-depth loading 67 mm.Rotating and removable hinged air conveyor, easy cleaning.Cooking...
%
Mechanical control panel: steam regulator from 0 to 99%, thermostat from 50 ° C to 270 ° C, timer from 1 to 120 min.Oven "LENGTHWISE" loading plates GN 1/3 ,1/2 , 2/3 et 1/1Standard delivered with 1 grid GN 1/1 Compact, space-saving furnacesDirect steam by "nebulization"Convection heating: by a gas burner (PREMIX SYSTEM) placed in the chamber, behind the turbine deflector.Depth loading, spacing 67 mmEasy after-sales service, access to controls from the side partHinged turbine deflector, easy...
%
2 independent plates (2x 3 kW).Cupboard (GN 1/1) (340x940xh360 mm). Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in stainless steel AISI 304.Square cast iron plates, 300x300 mm, with a waterproof edge in stainless steel, safety device in case of overheating. Regulation of the heating power by means of a 7-position switch, frontal accessibility allowing a very easy maintenance.
%
4 independent square plates (3x 3 kW, 1x 4 kW).Cupboard (GN 2/1) (660x940xh360 mm). Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in stainless steel AISI 304.Square cast iron plates, 300x300 mm, with a waterproof edge in stainless steel, safety device in case of overheating. Regulation of the heating power by means of a 7-position switch, frontal accessibility allowing a very easy maintenance.
%
4 independent square plates (3x 3 kW, 1x 4 kW).Oven (10 kW) GN 2/1 (540x940xh300 mm) Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in stainless steel AISI 304.Square plates in cast iron, 300x300 mm, with a waterproof stainless steel edge, safety device in case of overheating. Regulation of the heating power with a 7-position switch, frontal accessibility allowing a very easy maintenance.
%
4 plates Ø 230 mm, independent (4x 2.6 kW).Oven GN 2/1, dimensions 540x650xh300 mm (6 kW). Made of 18/10 AISI 304 stainless steel, deep-drawn "top" thickness 15/10 mm, adjustable stainless steel feet (150/200 mm), waterproof "IPX4".AISI 430 stainless steel oven, rounded corners, steel bottom, removable plate structure, double-walled deep-drawn door with thermal insulation (40 mm), counterbalanced spring hinges, stainless steel handle.Cast iron plates, with a stainless steel sealing edge....
%
4 plates Ø 230 mm, independent (4x 2.6 kW).Oven GN 2/1, dimensions 540x650xh300 mm (6 kW). Made of 18/10 AISI 304 stainless steel, deep-drawn "top" thickness 15/10 mm, adjustable stainless steel feet (150/200 mm), waterproof "IPX4".AISI 430 stainless steel oven, rounded corners, steel bottom, removable plate structure, double-walled deep-drawn door with thermal insulation (40 mm), counterbalanced spring hinges, stainless steel handle.Cast iron plates, with a stainless steel sealing edge....
%
%
- 4 plates 230x230 mm, independent (4x 2.6 kW).- Oven GN 2/1, dimensions 540x650xh300 mm (6 kW).- Made of 18/10 AISI 304 stainless steel, deep-drawn "top" thickness 15/10 mm, adjustable stainless steel feet (150/200 mm), waterproof "IPX4". - AISI 430 stainless steel oven, rounded corners, steel bottom, removable plate structure, double-walled deep-drawn door with thermal insulation (40 mm), counterbalanced spring hinges, stainless steel handle. - Cast iron plates, with a stainless steel...
%
- 4 separate cooking fields Ø 230 mm (4x 2.2 kW).- Oven GN 2/1, dimensions 540x650xh300 mm (6 kW).- Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), adjustable stainless steel feet (150/200 mm).- Ceramic glass (6 mm), with radiant heaters diameter 300 mm. Glass ceramic plates are characterized by a fast temperature setting. Graduated energy regulator for each cooking field. - Electric oven, heating by stainless steel resistors placed in the vault and under the bottom of the...