%
- Structures with slides for plates (8 levels) included (460x340 or 433x333 or 353x325 GN2/3) - Glass door- Structure for plates (74 mm), removable- Door in tempered glass (6 mm) with stainless steel handle- Heating through stainless steel armoured resistances- Adjustable slides- GN vat inside (on the bottom), tu put water and to humidify the cupboard- On/off switch- Mechanical thermosat (30° to 60°C) with pilot light- Manufactured in stainless steel- Adjustable stainless steel feet-...
%
Capacity 16x 600x400, H=700 mm
%
- Capacity: 28x 600x400 mm, H =940 mm
%
Capacity 12x 600x400 mm, H=700 mm
%
Capacity 21x 600x400 mm, H=940 mm
%
- Capacity 24x 600x400 mm, H=700 mm
%
Capacity 42x 600x400 mm, H=940 mm
%
Variable speed (Min. 65 rpm & Max. 551 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 60 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact with the...
%
%
2 speeds (40 to 60 movements per minute)Production capacity 5 to 40 kg (70 Lt)Flour capacity 3 to 25 kgTimer supplied as standardAdjustable right armTank Ø 530xh320 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
2 speeds (Fork: 1st Speed 19 rpm and 2nd Speed 29 rpm) & (Tank: 1st Speed 6 rpm and 2nd Speed 9 rpm)TimerScraper in tank, in stainless steel and polyethylene supplied as standard.Spiral diameter 31 mmDiameter of the tank 660 mm height 330 mm (70 litres) = 60 kg of dough.Comes standard with 2 fixed wheels (nylon) and 2 cylinders at the front.Analog control panel with low voltage 24V.2-speed motor, gearbox drive (independent tank and fork), self-lubricating, pulley transmission, very quiet...
%
%
Internal dimensions 660x420xh825Standard equipment: 1 grid EN 600x4003 "autoreverse" turbines. Welded room in stainless steel (AISI 304). , rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...
%
Production capacity 40 kg (80 Lt)Flour capacity 25 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 224 rpm) & (Tank: 1st Speed 14 rpm and 2nd Speed 28 rpm)2 electronic timers, for the automatic management of each speed.Tank Ø 530xh320 mm Control panel, low voltage 24V. (IP55).Motor with pulley transmissions.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Spiral tank, tool shaft and dividing share are made of thick AISI 304...
%
Production capacity 60 kg (100 Lt)Flour capacity 35 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 224 rpm) & (Tank: 1st Speed 14 rpm and 2nd Speed 28 rpm)2 electronic timers, for the automatic management of each speed.Tank Ø 580xh360 mm Control panel, low voltage 24V. (IP55).Motor with pulley transmissions.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Spiral tank, tool shaft and dividing share are made of thick AISI 304...
%
Production capacity 60 kg (100 Lt)Flour capacity 40 kg2 speeds, automatically adjustable (Spiral: 1st Speed 98 rpm and 2nd Speed 198 rpm) & (Tank: 21 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 600xh360 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
%
Structures with slides for plates (8 levels) included (460x340 or 433x333 or 353x325 GN2/3)Glass door Structure for plates (74 mm), removableDoor in tempered glass (6 mm) with stainless steel handleHeating through stainless steel armoured resistancesAdjustable slidesGN vat inside (on the bottom), tu put water and to humidify the cupboardOn/off switchMechanical thermosat (30° to 60°C) with pilot lightManufactured in stainless steelAdjustable stainless steel feetEquipment manufactured following...
%
Supplied as standard with 1 stainless steel plate and 1 grid 460x340 (433x333 mm grids or plates can also be supplied). Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel.Distance between boards 70 mm.Pipe for the evacuation of the condensate.T° from 50°C to 270°C, 2 motors with fans (2600 rpm), internal lighting.Folding door with double glazing, stainless steel handle, gasket on the counter door "easily removable", removable inner glass for easy...