%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Included: 20 pairs of runners (600 x 800 mm).Inner door with heating resistance and under-pressure valve.4 adjustable stainless steel feet.Cooling gas R134.Interior and exterior made of (food) stainless steel AISI 304 (back made of galvanized steel), monocoque frame.Racks and rails in stainless steel (maximal capacity 27 slides, 50-mm spacing), which help to position the trays as one pleases, stamped inside bottom, with drain plug (major maintenance) and rounded angles and corners (without...
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbines Chamber with rounded corners.Easily removable" counter-door seal.Easily removable plate-holder structure (75 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Double-glazed athermic door (4 mm), hinged intermediate pane for easy maintenance. Ergonomic athermic handle, self-closing. Micro-switch to stop...
%
- Electric model. - In option : Trolley 15x 600x800 mm - 30x 600x400 mm (or) 18x 600x800 mm - 36x 600x400 mm, as well as the trolley inside (not delivered with the oven).- Designed for high productivity, double quick to put inside and to take off.- Façade in chromium-nickel-steel AISI 304.- Turning chariot, hanging for the upper chariot.- Cooking chamber, designed in chromium-nickel-steel AISI 304.- Oven door with thermal handle, security device and large security glass.- Standard vacuum for...
%
- Electric model. - In option : Trolley 15x 600x800 mm - 30x 600x400 mm (or) 18x 600x800 mm - 36x 600x400 mm, as well as the trolley inside (not delivered with the oven).- Designed for high productivity, double quick to put inside and to take off.- Façade in chromium-nickel-steel AISI 304.- Turning chariot, hanging for the upper chariot.- Cooking chamber, designed in chromium-nickel-steel AISI 304.- Oven door with thermal handle, security device and large security glass.- Standard vacuum for...
%
Variable speed (Min. 53 rpm & Max. 517 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 10 L stainless steel tank.Table versions.Frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levelling.Fixed tank, automatic locking in working position.Protective plexiglass with safety device by microswitch.All parts in contact with the tank are made of stainless steel.Easy insertion and removal of utensils.When the...
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controlsVariable speed (10 rpm to 60 rpm), with Inverter.Side tables 1000x500 mm (foldable)Cylinder length 500 mmRoll opening 0 - 36 mm, rolling diameter 60 mmTravel speed 35 metres/minuteClosed overall dimensions 380x920xh1240.Standard: Harvesting bins under the mats, 2 harvesting terminals and 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of...
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controls.1 speed.Side tables 1000x500 mm (foldable).Cylinder length 500 mm.Roll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minute.Closed overall dimensions 380x920xh1240.Standard: Harvesting bins under the mats, 2 harvesting terminals and 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough sheet,...
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controlsVariable speed (10 rpm to 60 rpm), with Inverter.Side tables 700x500 mm (foldable)Cylinder length 500 mmRoll opening 0 - 36 mm, rolling diameter 60 mmTravel speed 35 metres/minuteClosed overall dimensions 380x920xh850.Standard: 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough sheet, constant production.Scrapers...
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controls.1 speed.Side tables 700x500 mm (foldable).Cylinder length 500 mm.Roll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minute.Closed overall dimensions 380x920xh850.Standard: 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough sheet, constant production.Scrapers and supports made with specific...
%
Mechanical controls, mats manipulated by joystick.Base mounted version, 4 wheels, 2 fixed, 2 swivel wheels with brakes.Manual and pedal controls.Variable speed (10 rpm to 60 rpm), with Inverter.Side tables 1000x500 mm (foldable)Cylinder length 500 mmRoll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minuteClosed overall dimensions 580x920xh1940Standard: 2 stainless steel harvesting terminals, 2 pastry rollers.Strips made with specific materials for food use.Precise...
%
Mechanical controls, mats manipulated by joystick.Base mounted version, 4 wheels, 2 fixed, 2 swivel wheels with brakes.Manual and pedal controls.1 speedSide tables 1000x500 mm (foldable)Cylinder length 500 mmRoll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minuteClosed overall dimensions 580x920xh1940Standard: 2 stainless steel harvesting terminals, 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough...