%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Flow rate: 3000 m³/o. (Pressure drop 380 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 4500 m³/o. (Pressure drop 220 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 2500 m³/o. (Pressure drop 210 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5600 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
%
Production 2400/800 pieces/h.Portions from 50 to 300 gr. "Millimetric" cut check by photocell.Transparant lid with micro-switch.Tank capacity 30 kg, knives and endless screws made of stainless steel.24-V low voltage control panel.Safety micro-switch.Entirely dismountable for an easy maintenance.Outside realization made of "epoxy paint" steel.Delivered with 2 forms CN/45 & CN70, base & pouring funnel for coupling BSL-300A.
%
Cast-iron plate, necessary measurements 365x255 mm.Stabilizing system in the upper plate, in order to keep the upper plate always in a horizontal position.Thermostat regulation up to 250°.
%
Plate in cast iron with ally for food, useful dimensions 225x255 mm.Stabilizing system in the top plate, allowing a constant horizontal position.Top plate handle in heatproof material.Heating resistances, situated under the cast iron plate.Regulation through thermostat till 250°C, together with a warning light.Structure in AISI 304 stainless steel.Adjustable lower legs.The equipment is manufactured following the (CE) standards in force
%
Plate in cast iron, useful dimensions 550x255 mm.Stabilizing system in the top plate, allowing a constant horizontal position.Regulation through thermostat till 250°C.
%
Upper plate gridlled, underplate flat all in vitroceramic.Easy maintenance working surface : 558 x 250 mm.Reception tub for liquids in front.Fitted with balanced springs on upper partRegulation thermostat till 250°C (from 20 till 200° in 4 min. till 300°C in 6 min). Low energy consumption.Chassis in stainless AISI 304.
%
Upper plate gridlled, underplate flat all in vitroceramic.Easy maintenance working surface : 370x250 mm.Reception tub for liquids in front.Fitted with balanced springs on upper partRegulation thermostat till 300°C (from 20 till 200° in 4 min. till 300°C in 6 min). Low energy consumption.Frame in stainless AISI 304.