%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Flow rate: 3000 m³/o. (Pressure drop 380 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 4500 m³/o. (Pressure drop 220 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 2500 m³/o. (Pressure drop 210 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5600 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
%
"Wall" model with back board.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
Production unit combined with a storage unit.Production 400 kg per 24/h.Air condenser. Refrigerant cylinder system with scraper (continuous production).Very low temperature ice from -5°C to -10°C.Tropicalized hermetic unit ambient temperature + 43 °CRefrigerant gas R404a or R452a.Made of AISI 304 stainless steel.The device is built in compliance with all applicable standards (CE).
%
Production unit combined with a storage unit.Production 400 kg per 24/h.Air condenser. Refrigerant cylinder system with scraper (continuous production).Very low temperature ice from -5°C to -10°C.Tropicalized hermetic unit ambient temperature + 43 °Crefrigerant gas R404a or R452a per capillary..The device is built in compliance with all applicable standards (CE).
%
Production unit combined with a storage unit.Production 900 kg per 24/h.Air condenser.Refrigerant cylinder system with scraper(continuous production).Very low temperature ice from -5°C to -10°C.Tropicalized hermetic unit ambient temperature + 43 °CRefrigerant gas R404a or R452a Made of AISI 304 stainless steel.The device is built in compliance with the current CE standards.
%
Production unit combined with a storage unit.Production 900 kg per 24/h.Water condenser. Refrigerant cylinder system with scraper (continuous production).Very low temperature ice from -5°C to -10°C.Tropicalized hermetic unit ambient temperature + 43 °CRefrigerant gas R404a or R452a Made of AISI 304 stainless steel.The device is built in compliance with the current CE standards.
%
Wall-mounted" version with raised rear edge.Included: 4 GN grids (325x535 mm), with guides.6 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the rear) of austenitic stainless steel (food-grade), top (40 mm).Interior bottom is embossed, with a large maintenance drain plug, rounded corners (without roughness), stainless steel grids and guides (anti-tilting).Doors with recessed handles (non-protruding), magnetic seal (easy replacement without tools),...