%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
With humidifierIncluded: 8 pairs of slides + 8 plastic grids 2/1, for cheeseRefrigerant gas R134. Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired (67 mm spacing), deep-drawn inner bottom and rounded corners and angles (without rough edges)Glazed doors with ergonomic handle (not projecting), reversible, closing by "triple chamber" and magnetic...
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Flow rate: 3000 m³/o. (Pressure drop 380 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 4500 m³/o. (Pressure drop 220 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 2500 m³/o. (Pressure drop 210 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5600 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
%
Thermoformed ABS cheeks, front and back in laminated sheet metal.Tempered glass windows, right front glass at 90°, window lifting system with hydraulic pistons.Anodized aluminum profiles.Exhibition in AISI 304 stainless steel, depth 900 mm (EURONORM and GASTRONORM).Worktop in AISI 304 stainless steel.LED lighting for the exhibition (positioned under the upper glass).Light switch and single-phase socket.With "non-refrigerated" reserve.Frame made of plastic-coated (epoxy) steel sheet,...
%
Thermoformed ABS cheeks, front and back in laminated sheet metal.Tempered glass windows, right front glass at 90°, window lifting system with hydraulic pistons.Anodized aluminum profiles.Exhibition in AISI 304 stainless steel, depth 900 mm (EURONORM and GASTRONORM).Worktop in AISI 304 stainless steel.LED lighting for the exhibition (positioned under the upper glass).Light switch and single-phase socket.With "non-refrigerated" reserve.Frame made of plastic-coated (epoxy) steel sheet,...
%
Thermoformed ABS cheeks, front and back in laminated sheet metal.Tempered glass windows, right front glass at 90°, window lifting system with hydraulic pistons.Anodized aluminum profiles.Exhibition in AISI 304 stainless steel, depth 900 mm (EURONORM and GASTRONORM).Worktop in AISI 304 stainless steel.LED lighting for the exhibition (positioned under the upper glass).Light switch and single-phase socket.With "non-refrigerated" reserve.Frame made of plastic-coated (epoxy) steel sheet,...
%
Thermoformed ABS cheeks, front and back in laminated sheet metal.Tempered glass windows, right front glass at 90°, window lifting system with hydraulic pistons.Anodized aluminum profiles.Exhibition in AISI 304 stainless steel, depth 900 mm (EURONORM and GASTRONORM).Worktop in AISI 304 stainless steel.LED lighting for the exhibition (positioned under the upper glass).Light switch and single-phase socket.With "non-refrigerated" reserve.Frame made of plastic-coated (epoxy) steel sheet,...
%
Thermoformed ABS cheeks, front and back in laminated sheet metal.Tempered glass windows, right front glass at 90°, window lifting system with hydraulic pistons.Anodized aluminum profiles.Exhibition in AISI 304 stainless steel, depth 900 mm (EURONORM and GASTRONORM).Worktop in AISI 304 stainless steel.LED lighting for the exhibition (positioned under the upper glass).Light switch and single-phase socket.With "non-refrigerated" reserve.Frame made of plastic-coated (epoxy) steel sheet,...