2 professional magnetrons, adequate for intensive use. Mechanic control, 5 power levels. Programmable timer key for 20 seconds use at the highest power. Outgoing power 1850 W. Easy cleaning of the aeration filter. Dimensions int.: 370x370xh190 mm Content 26 litres. Stackable units Interior and exterior manufactured in stainless steel.
%
Cooking on 2 levels, inner chamber of 535x330xh250 mm.4 professional microwave ovens of 450 W, specially designed for intensive use, power 1800 W.Mechanic control, programmable clock (60 min.).Capacity 44 liters, 4 power levels.Inner- and outer finishing in stainless steel, swinging door.
%
Cooking on 2 levels, inner chamber of 535x330xh250 mm.4 professional microwave ovens of 525 W, specially designed for intensive use, power 2100 W.Mechanic control, programmable clock (60 min.).Capacity 44 liters, 4 power levels.Inner- and outer finishing in stainless steel, swinging door.
%
Cooking on 2 levels, inner chamber of 535x330xh250 mm.4 professional microwave ovens of 800 W, specially designed for intensive use, power 3200 W.Mechanic control, programmable clock (60 min.).Capacity 44 liters, 4 power levels.Inner- and outer finishing in stainless steel, swinging door.
%
Good for big production: 90 kg/h.Frame in aluminium alloy and stainless steel.Functionning by "cylinder" roll Ø 140 mm, provided with an upper lever (with safety microswitch device),opening 140x80 mm.Gear traction in oil bath.Engine in 1400 Tr / Minutes, equipped with thermal protection, low voltage control (24 V) Protected.
%
2 professional magnetrons, for intensive useInternal LED lightingMechanical controls, 5 power levels Pre-programmed button for use during 20 seconds (at the highest power)Power output (rendered) 1850 WEasy cleaning of the ventilation filterInternal dimensions: 370x370xh190 mm Content 26 litersStackable appliances Interior and exterior stainless steel construction
%
Output power 1800 W2 magnetron (1 in the top, 1 under the base of the oven), for a very intensive professional use!Mechanical control panel: 2 buttons, selection with 7 power levels and timer select or (0 to 60 minutes) with end cycle sound and visual displaySelf-diagnostic device in case of anomalies.100 "storable" programsAs standard with middle shelf in treated glass (removable) (350x350mm).Capacity 34 liters, with the possibility of using GN 2/3, 1/2, 1/3, 1/4 ... dishes up to ø 350...
%
Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.Diameter of the basin 420, depth 485 mm.Outlet tap of 1",1/2. Made of 18/10 AISI 304 stainless steel, deep-drawn "Top" thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel (Food certified according to European regulation CE n.1935/2004), bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped...
%
Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.Diameter of the basin 420, depth 485 mm.Outlet tap of 1",1/2. Made of 18/10 AISI 304 stainless steel, deep-drawn "Top" thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel (Food certified according to European regulation CE n.1935/2004), bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped...
%
Tank diameter 600, depth 400 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 600, depth 400 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 600, depth 530 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 600, depth 530 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 400 mm, depth 420 mm.Drain tap 6/4". Made of stainless steel AISI 304, adjustable feet in stainless steel.Pressed and sealed top (15/10 mm) in stainless steel AISI 304.Rear chimney in stainless steel AISI 304.Deep-drawn tank made of AISI 304 stainless steel, bottom in AISI 316 stainless steel (bottom of the tank 30/10 mm thick, side walls 20/10 mm thick), resistant to salt corrosion and wear, equipped with removable strainer for protection of the drain valve, corners with...
%
Diameter of the tank 600 mm, depth 420 mm.Drainage tap 2".Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 30/10 mm, side walls in 20/10 mm, resistant to salt corrosion and wear, provided with a removable strainer for protection of the drain valve, corners with rounded interior...
%
Diameter of the tank 600 mm, deep 540 mm.Drainage tap 2".Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 30/10 mm, side walls in 20/10 mm, resistant to salt corrosion and wear, provided with a removable strainer for protection of the drain valve, corners with rounded interior...
%
- Diameter of the basin 420, depth 485 mm.- Outlet tap of 1,1/2".- Made of AISI 304 stainless steel, "deep drawn" top (15/10th), adjustable stainless steel feet (150/200 mm), waterproof "IPX5". - Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the tank. - Deep-drawn" cover, made of AISI 316 stainless steel with double...
%
Diameter of the basin 420, depth 485 mm.Outlet tap of 1,1/2". Made of AISI 304 stainless steel, "deep-drawn" top (15/10 mm), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel (Food certified according to European regulation CE n.1935/2004), bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the...
%
Tank diameter 600, depth 400 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Gas heating, by stainless steel burners with stabilized flame, regulation by valve.Appliances built in compliance...
%
Tank diameter 600, depth 530 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Gas heating, by stainless steel burners with stabilized flame, regulation by valve.Appliances built in compliance...
%
Tank diameter 600, depth 530 mm.2" drain valve. Constructed in stainless steel AISI 304, adjustable stainless steel feet.Tank "pressed" made of stainless steel AISI 304 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double-walled tank, water filling through a tap, a second one serving as an overflow to check...
%
Tank diameter 400 mm, depth 420 mm.6/4" drain valve.Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn and waterproof top (15/10 mm) in AISI 304 stainless steel.Rear chimney in AISI 304 stainless steel.Deep-drawn" tank made of AISI 304 stainless steel, bottom made of AISI 316 stainless steel (bottom of the tank 30/10 mm thick, side walls 20/10 mm thick), resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve, rounded inner...
%
Diameter of the tank 600 mm, depth 420 mm.2" drain tap.Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 (30/10 mm, side walls 20/10 mm), resistant to salt corrosion and usury, provided with a removable strainer for protection of the drain valve, corners with rounded interior angles....
%
Diameter of the tank 600 mm, depth 420 mm.2" drain tap.Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 (30/10 mm, side walls 20/10 mm), resistant to salt corrosion and usury, provided with a removable strainer for protection of the drain valve, corners with rounded interior angles....