%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Mixer with big flow: 35 liters/min.Output one hole 3/4" (Ø 29 mm).Wall attachment 115 mm.Flexible 1200-mm length.Flow of the nozzle 16 liters/min.
%
Flow rate (pressure 3 bar) tap 8 litres/minute, hand shower 12 litres/minute.Standard non-return valve (EN 1717 Belgaqua standard).Hand shower hose 60 mm (DVGW standards).Single hole outlet Ø min.27/max.35, thread length 50 mm, flexible hose G 3/8 female.Maximum pressure 10 bar (recommended 1-6 bar) and maximum temperature 90°C bar (recommended 90°C).
%
%
Mixer with big flow: 30 lit./min.Swan neck tap Ø 20 mm.Sprinkler length 1000 mm, wall attachment.Faucet flow 10 lit./min.Output one hole attachment (Ø 35 mm).
%
Flow rate (pressure 3 bar) tap 45 litres/minute, hand shower 16 litres/minute.Non-return valve as standard (standard EN 1717 Belgaqua.)Wall bracket 150 mmGooseneck Ø 25 mm (L.250mm).Hand shower hose 1050 mm (DVGW standards).Single hole outlet Ø min.27/max.35, thread length 80 mm, hoses G 1/2 femaleMaximum pressure 6.5 bar and maximum temperature 65°C bar.
%
Tap, flow: 18 liters/min.Output one hole 3/4" (Ø 29 mm).Wall attachment 115 mm.Flexible 1050-mm length.Flow of the nozzle 16 liters/min.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Tubular stainless steel structure, cross-section 2.5x2.5 cm, weldednext to the stainless steel finishing panel.High level suitable for insertion of GN containers for a total of 3x GN 1/1 with depths up to 20 cm.Lower levels with extractable stainless steel shelves, depth 2 cm.Grey rubber bumpers at corners.Swiveling castors, diam. 12.5 cm, including 2 braked castors.Total capacity 100 kg.
%
Tubular stainless steel structure, cross-section 2.5x2.5 cm.High level suitable for insertion of GN containers for a total of 3x GN 1/1 with depths up to 20 cm (containers not included).Lower levels with extractable stainless steel shelves.Grey rubber bumpers at corners.Swiveling castors, diam. 12.5 cm, including 2 braked castors.Total capacity 80 kg.
%
Tubular stainless steel structure, cross-section 2.5x2.5 cm.High level suitable for insertion of GN containers for a total of 3x GN 1/1 with depths up to 20 cm (containers not included).Lower levels with extractable stainless steel shelves.Grey rubber bumpers at corners.Swiveling castors, diam. 12.5 cm, including 2 braked castors.Total capacity 80 kg..
%
Stainless steel tube structure AISI 304 18/10 20x20 mm.Sloping base and stainless steel AISI 304 covering.Capacity 200 plates.4 swivel castors with stubborn Ø 125, 2 with brake.Can be dismantled.
%
Flow rate: 3000 m³/o. (Pressure drop 380 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 4500 m³/o. (Pressure drop 220 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 2500 m³/o. (Pressure drop 210 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...