%
- Air condenser.- Vertical turbine with automatic extraction, low maintenance and very easy to use.- Easy installation due to its compact size.- Minimum mixing capacity 1 liter and maximum 2 liters.- Noise level below 70 dB.- Cycle with time control or with temperature control.- Vertical cylinders-evaporators for a bigger surface of exchange.- Exclusive dispensing device.- Auto diagnostic system.- Cycle time: 10/20 min.- Hourly production: 12 liters.NB: mainly for cold work.
%
- Air condenser.- Vertical turbine with automatic extraction, low maintenance and very easy to use.- Easy installation due to its compact size.- Minimum mixing capacity 1 liter and maximum 2 liters.- Noise level below 70 dB.- Cycle with time control or with temperature control.- Vertical cylinders-evaporators for a bigger surface of exchange.- Exclusive dispensing device.- Auto diagnostic system.- Cycle time: 10/20 min.- Hourly production: 12 liters.NB: mainly for cold work.
%
Tank GN 1/1, dimensions 305x510xh300 mm.NB: baskets optional. Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in stainless steel AISI 304."Stamped" tank in stainless steel AISI 316 with all corners rounded for easy and hygienic maintenance, thickness 15/10th, resistant to salt corrosion and usury, provided with an overflow for collection of starch separation and a double perforated bottom in...
%
Basin GN1/1, dimensions 250x400xh300 mm, capacity 24,5 liters. Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Tank, with rounded corners, in AISI 316 stainless steel, equipped with an overflow. Water tap for filling, drain valve (ball valve).Infrared electric heating, rapid temperature control, energy regulator.Appliances built in compliance with current standards (CE)
%
Basin GN1/1, dimensions 250x400xh300 mm, capacity 24,5 liters. Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Tank, with rounded corners, in AISI 316 stainless steel, equipped with an overflow. Water tap for filling, drain valve (ball valve).Infrared electric heating, rapid temperature control, energy regulator.Appliances built in compliance with current standards (CE)
%
2 basins dimensions 250x400xh300 mm, capacity 2 x 24,5 liters. Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Tank, with rounded corners, in AISI 316 stainless steel, equipped with an overflow. Water tap for filling, drain valve (ball valve).Infrared electric heating, rapid temperature control, energy regulator.Appliances built in compliance with current standards (CE)
%
2 basins dimensions 250x400xh300 mm, capacity 2 x 24,5 liters. Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Tank, with rounded corners, in AISI 316 stainless steel, equipped with an overflow. Water tap for filling, drain valve (ball valve).Infrared electric heating, rapid temperature control, energy regulator.Appliances built in compliance with current standards (CE)
%
GN 1/1 tank, dimensions 300x520xh260 mm, capacity 40 litres. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Tank with rounded corners in AISI 316 stainless steel, equipped with an overflow for starches. Water tap for filling, drain valve (ball valve).Electrical heating by armoured resistors in stainless steel 18/10 placed outside the tank, energy regulator.Appliances built in compliance with current standards (CE)
%
GN 1/1 tank, dimensions 300x520xh260 mm, capacity 40 litres. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Tank with rounded corners in AISI 316 stainless steel, equipped with an overflow for starches. Water tap for filling, drain valve (ball valve).Electrical heating by armoured resistors in stainless steel 18/10 placed outside the tank, energy regulator.Appliances built in compliance with current standards (CE)
%
2 GN 1/1 tanks, dimensions 300x520xh260 mm, capacity 40 litres. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Tank with rounded corners in AISI 316 stainless steel, equipped with an overflow for starches. Water tap for filling, drain valve (ball valve).Electrical heating by armoured resistors in stainless steel 18/10 placed outside the tank, energy regulator.Appliances built in compliance with current standards (CE)
%
2 GN 1/1 tanks, dimensions 300x520xh260 mm, capacity 40 litres. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Tank with rounded corners in AISI 316 stainless steel, equipped with an overflow for starches. Water tap for filling, drain valve (ball valve).Electrical heating by armoured resistors in stainless steel 18/10 placed outside the tank, energy regulator.Appliances built in compliance with current standards (CE)
%
Cooling capacity rendered 633 (W/f) for chamber volume 3,0 m³ / 3000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Cooling capacity rendered 824 (W/f) for chamber volume 5,0 m³ / 5000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Cooling capacity rendered 1258 (W/f) for chamber volume 10,2 m³ / 10200 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity rendered 1509 (W/f) for chamber volume 13,2 m³ / 13200 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity rendered 2313 (W/f) for chamber volume 27,8 m³ /27800 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity 2139 (W/f) for room volume 18,1 m³ / 18100 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard...
%
Cooling capacity 3490 (W/f) for room volume 34,3 m³ / 34300 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve.Also equipped with a high pressure switch (fixed calibration) (C-PMAX-R). Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a...
%
Cooling capacity 981 (W/f) for room volume 6,2 m³ / 6200 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a high...
%
Cooling capacity 1800 (W/f) for room volume 14,9 m³ / 14900 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a...
%
- Tank, dimensions 245x370x190 mm.- Made of stainless steel AISI 304. - AISI 316 stainless steel tank, thickness 15/10ths, resistant to salt corrosion and wear, with overflow for starches. The discharge valve (ball valve) is placed on the front panel of the appliance. The inside of the tank is provided with a double perforated bottom in AISI 304 stainless steel that protects the resistances from possible contact with the baskets. - Electric heating by means of armoured stainless steel...
%
- Tank, dimensions 545x370x190 mm.- Made of stainless steel AISI 304. - AISI 316 stainless steel tank, thickness 15/10ths, resistant to salt corrosion and wear, with overflow for starches. The discharge valve (ball valve) is placed on the front panel of the appliance. The inside of the tank is provided with a double perforated bottom in AISI 304 stainless steel that protects the resistances from possible contact with the baskets. - Electric heating by means of armoured stainless steel...
%
Tank, dimensions 545x370x190 mm. Made of stainless steel AISI 304.AISI 316 stainless steel tank, thickness 15/10ths, resistant to salt corrosion and wear, with overflow for starches. The discharge valve (ball valve) is placed on the front panel of the appliance. The inside of the tank is provided with a double perforated bottom in AISI 304 stainless steel that protects the resistances from possible contact with the baskets.Electric heating by means of armoured stainless steel resistors placed...
%
Basin, dimensions 320x370x160 mm. Manufactured in stainless steel AISI 304.Basin in stainless steel AISI 316, thickness 15/10, resistant to the corrosion of salt and to wear and tear, equipped with a catching devise for abundant farina. The water tap and the (bullet) outlet tap are situated frontally. The bottom of the basin is equipped with a perforated plate in stainless steel, that protects the resistances from a possible contact with the pasta baskets.Electric heating, through armoured...