%
Capacity of the structure 10x GN 1/6 (trays in option).2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304 (food), outside AISI 441.Top in stainless steel AISI 304.Built-in refrigerated upper structure, fitted with a cover.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without...
%
Production 122 kg/24 h., capacity reserve 50 kg. "Paddle" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Production 22kg/24 h., capacity reserve 9 kg. "Palettes" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Production 31kg/24 h., capacity reserve 12kg. "Palettes" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Production 32 kg/24 h., capacity reserve 12kg. "Palettes" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Production 48 kg/24 h., capacity reserve 25 kg. "Paddle" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Production 55 kg/24 h., capacity reserve 30 kg. "Paddle" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Production 75 kg/24 h., capacity reserve 37kg. "Paddle" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built into the cabinet (right), ventilated condenser.Frontal accessibility of the compressor group, easy...
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
- Top in stainless steel AISI 304, with integrated refrigerated topping (8x GN 1/6-150 mm), with lid in stainless steel.NB: delivered without GN pans.Exterior and interior finish in stainless steel austenitic.Angles and edges rounded off.Delivered with 1 adjustable shelf GN 1/1 each door.Electronic thermostat in closed moisture proof housing.Evaporator tubes integrated in the walls (3 sides), polyurethane insulation, without CFC's.Ventilated saladette well, automatic defrost, auto-...
%
Production 122 kg/24 h., capacity reserve 50 kg. "Paddle" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
%
Production 48 kg/24 h., capacity reserve 25 kg. "Paddle" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Production 55 kg/24 h., capacity reserve 30 kg. "Paddle" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Production 75 kg/24 h., capacity reserve 37kg. "Paddle" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Version with 3 GN 1/2 + 1/3 drawers (Max. load height 300 mm).1 ventilated "treated" evaporator.6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 304 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 5 (40°C Temperature & 40%...
%
3 drawers version GN 1/1 (max. load Height 300 mm).1 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque design.Inside and outside (top included) manufactured in stainless steel AISI 304 (also the back).Stamped interior bottom, rounded angles and corners (no rough edges).Drawers with ergonomic handles, on telescopic runners, closed by magnetic pressure seals (easy replacement, no tools required).Class 5 compressor unit (40°C Temperature & 40% Humidity), built into...