%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Flow rate: 3000 m³/o. (Pressure drop 380 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 4500 m³/o. (Pressure drop 220 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 2500 m³/o. (Pressure drop 210 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5600 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
%
Flow of 30 liters/hour.Tap with gooseneck to fill in the glasses, immediate pulling. Copper evaporator following the norms (avoiding any bacteriological development).Direct expansion system (French norms).Equipped with a triple action filter (sediment, limestone, chlorine).Thermic unit (ambient T° +32°C).Refrigerant gas R290 .CFC-free polyurethane insulationPredisposed for connection at the cold water system and a discharge.Realization in stainless steel .The equipment is manufactured...
%
Flow from 35 liters/hours.Water outlet controlled by a solenoid valve operated by a stainless steel pedal.Tap with gooseneck to fill in the glasses, immediate pulling.Lifting tray, removable bowl for better cleaning. Copper evaporator following the norms (avoiding any bacteriological development).Direct expansion system (French norms).Equipped with a triple action filter (sediment, limestone, chlorine).Thermic unit (ambient T° +32°C).Refrigerant gas R290 .CFC-free polyurethane...
%
3 drawers version max. load Height 320 mm.2 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
Flow of 30 liters/hour.Tap with gooseneck to fill in the glasses, immediate pulling.Copper evaporator following the norms (avoiding any bacteriological development).Direct expansion system (French norms).Equipped with a triple action filter (sediment, limestone, chlorine).Thermic unit (ambient T° +32°C).Refrigerant gas R134a.CFC-free polyurethane insulationPredisposed for connection at the cold water system and a discharge.Realization in stainless steel .The equipment is manufactured...
%
3 drawers version GN 1/1 (max. load Height 300 mm).2 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque design.Interior and exterior (including top) in AISI 304 stainless steel (food-grade) (rear also).Deep-drawn inner bottom and rounded corners and edges (no rough edges).Drawers with ergonomic handles, on telescopic slides, magnetic pressure seals (easy replacement, no tools required), electric resistance on counter-doors, allowing drawers to be opened.Class 5...