%
Made of ABS, easily removable tank, easy cleaning. Ventilated motor 2800 rpm.Standard 1 smooth knife and a mixer in ABS.Safety micro-switch.Lid in transparent Lexan, the addition of ingredients is possible thanks to a hole on the lid.Scraper as standard.Low voltage 24V controls, protection class (IP67), NVR (No-Voltage Release).
%
Turns per minute: 2600 rpm.Tank capacity: 3,3 Lt.Useful tank capacity: 1,5 Lt. Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High safety guaranteed by a double micro-switch on the lid.Lid in...
%
Chamber: 420x420x140 mm2 stackable ovens (1+1)Stainless steel front, painted steel frame.Chamber with refractory stone base, thick rock wool insulationSmall smoke evacuation chimneyHigh T°" interior lighting, recessed, avoiding any impactDoor with "athermal" handle, large safety glass windowHeating by stainless steel armoured resistorsT° control (450°C), safety thermostat as standardThe device is built in compliance with the current CE standards.
%
- Turns/minute: rpm 145.- Duration of the production cycle 90-120 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control panel...
%
Table top model.Made of AISI 304 stainless steel.Powerful motor. The rotor works in oil-bath and it's equipped with a double sealing system.Safety microswitch on the cover.Removable AISI 304 stainless steel mixing arm (no tools required).Front outlet opening for shaft removal and product unload.IP 54 on/off switch with NVR (24 V) and reverse for a better mix.Machine produced in accordance with the actual CE standards.
%
Turns/minute: Rpm 270.Duration of the production cycle 60-90 sec.Color BLACK. Stainless steel undercarriage AISI 304.Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges.Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor).Digital control panel (placed at the...
%
Designed in stainless steel.ON/OFF switch.Shielded steel element heating.Strengthened protection cables for a better security, without affecting the heat distributionLateral supports for heating bridge.Chromium-plated feet, in the shape of "C".Free space underneath the heating bridge: 343 mm.
%
Fitted with ceramic heating elements, ON/OFF switch.Incandescent lights.Very solid breath barrier (right).Heating base plate, gradual regulation of the heat intensity.
%
Model to put down."Toggle" switch.Free space underneath the 356 mm heating bridge.Base for GN 1/1.Infrared heating element above the tray, ON/OFF switch.Electric cable, 1829 mm, with plug.
%
Model to put down."Toggle" switch.Free space underneath the 356 mm heating bridge.Base for GN 1/1 sterilizer.Infrared heating element above the plate, ON/OFF switch.Electric cable, 1829 mm, with plug.
%
Fitted with ceramic heating elements, ON/OFF switch.Incandescent lights.Very solid breath barrier (right).Neutral base plate.
%
Cooling capacity rendered 633 (W/f) for chamber volume 3,0 m³ / 3000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Cooling capacity rendered 824 (W/f) for chamber volume 5,0 m³ / 5000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Cooling capacity rendered 1258 (W/f) for chamber volume 10,2 m³ / 10200 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity rendered 1509 (W/f) for chamber volume 13,2 m³ / 13200 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity rendered 2313 (W/f) for chamber volume 27,8 m³ /27800 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity 2139 (W/f) for room volume 18,1 m³ / 18100 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard...
%
Cooling capacity 3490 (W/f) for room volume 34,3 m³ / 34300 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve.Also equipped with a high pressure switch (fixed calibration) (C-PMAX-R). Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a...
%
Cooling capacity 981 (W/f) for room volume 6,2 m³ / 6200 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a high...
%
Cooling capacity 1800 (W/f) for room volume 14,9 m³ / 14900 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a...
%
- Useful capacity of the tank (+/- 8,5 liters).- Basket dimensions 220x190xh110 mm.- Designed in stainless steel.- Frontal drainage tap, fitted with a safety device. - Stainless steel baskets ("strengthened") with thermal handle. - Shielded element heating "treated" and immersed in the tank. - Cold area: no carbonization of the wastes, no taste transmission. - On/Off switch, thermostat from 0°C to 180°C, safety thermostat as well, wires of the bulbs fitted with a protection. - Easy cleaning:...
%
- Useful capacity of the tank (+/- 8,5 liters)- Basket dimensions 220x190xh110 mm.- Designed in stainless steel, fitted with 2 lateral and thermal handles. - Stainless steel tank AISI 304, fitted with a lid.- Frontal drainage tap, fitted with a safety device.- Stainless steel baskets ("strengthened") with thermal handle.- Shielded element heating "treated" and immersed in the tank. - Cold area: no carbonization of the wastes, no taste transmission.- On/Off switch, thermostat from 0° to 180°C,...
%
- Useful (+/- 3,5 liters). - Basket 120x220xh110 mm.- Made of stainless steel, 2 athermic handles, with cover. - Stainless steel basket (very robust "reinforced"), athermic handle. - Stainless steel tank AISI 304, equipped with cover. - Heating by "treated" shielded resistance heating, immersed in tank. - Cold zone: no carbonization of food waste. - Thermostat from 0°C to 180°C, as well as a safety thermostat (bulb wires with protection). - Easy maintenance: removable control box (equipped...
%
- Useful capacity of the tanks (+/- 6.5 liters).- Basket dimensions 220x190xh110 mm.- Designed in stainless steel, fitted with 2 lateral and thermal handles. - Stainless steel baskets ("strengthened") with thermal handle.- Stainless steel tank AISI 304, fitted with a lid.- Shielded element heating "treated" and immersed in the tank.- Cold area: no carbonization of the wastes, no taste transmission.-Thermostat from 0° to 180°C, safety thermostat as well, wires of the bulbs fitted with a...