%
Base crossed with storage for plates and cutlery.Stainless steel posterns, roof with removable protections (condiments or dishes 190 mm) , anti-breath protection cristal "plexiglas", at each side, LED lighting.2 stainless steel tracks, 1 at each side (folding shelves, easy pass, standard doors, 0.8 m).Built-in compressor unit, climate class 4 (30°C & 55% RH)Evaporator "coil" drowned in the stainless steel tank.Ecological refrigerant R290 (CFC-free)Insulation made of expanded polyurethane,...
%
Base crossed with storage for plates and cutlery.Stainless steel posterns, roof with removable protections (condiments or dishes 190 mm) , anti-breath protection cristal "plexiglas", at each side, LED lighting.2 stainless steel tracks, 1 at each side (folding shelves, easy pass, standard doors, 0.8 m).Built-in compressor unit, climate class 4 (30°C & 55% RH)Evaporator "coil" drowned in the stainless steel tank.Ecological refrigerant R290 (CFC-free)Insulation made of expanded polyurethane,...
%
- Refrigerated version: "coil" evaporator immersed under the stainless steel tank, expanded polyurethane insulation, CFC-free. - Drain for condensate discharge. - Ecological refrigerant R134A (CFC-free). - U.H./Danfoss compressor, for ambient temperature (+32°C). - Electronic thermostat.- Wooden construction. - Through base for the storage of plates and cutlery. - Brushed stainless steel pots, roof with removable retainers (condiments or 190 mm plates), "tempered" glass breath guard on each...
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Stainless steel base AISI 304 18/10.Heated electric resistance elements.Voltage supply 230 V single phase 50/60 HzElectric heating, thermostat from 30 to 90°C.Rubber feet.Power 450 W.Plexiglas "dome" with double opening.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Flow rate: 3000 m³/o. (Pressure drop 380 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 4500 m³/o. (Pressure drop 220 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 2500 m³/o. (Pressure drop 210 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5600 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
%
Stand in stainless steel AISI 441.Thickness of the block 100mm in white polyethylene.
%
Stand in stainless steel AISI 441.Thickness of the block 100mm in white polyethylene.