%
%
Stainless steel sheet structure, brushed finishing. Insulated withexpanded polyurethane panels.Insulated top lids opening outwards through 180° to form supportsurfaces, complete with edges to retain condensation.Pressed stainless steel basin without sharp edges, withthermostats, for GN containers up to 20 cm depth (not included).Heated with dry resistance elements underneath each basin.Insulated movement handles.Edge bumper strips in grey non-marking rubber.Castors diam. 16 cm, with two...
%
Structure en tôle d'acier inox, finition brossée. Isolés avec despanneaux de polyuréthane expansé.Des couvercles supérieurs ouvrables à 180°, pour former un plan detravail, dotés de bord de limitation de condensation.Bassins inox emboutis et dépourvus d'arêtes, avec thermomètre/ thermostats indépendants, pour récipients GN et profondeur 20 cm (non inclus).Chauffants avec éléments de résistance à sec sous chaque cuve.Compartiment neutre inférieur, fermé avec porte à charnièrerabattable vers...
%
Tank: 310x690xh160 mm, trays GN-150 mm. (NB: GN trays not included).Cupboard (GN 1/1) (340x940xh360 mm). Made in stainless steel AISI 304, adjustable feet in stainless steel.Waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in stainless steel AISI 304. "Stamped" tank in stainless steel AISI 304 welded (continuous), with all corners and interior corners rounded for easy and hygienic maintenance, a drain valve (bullet) is placed on the front of the unit. Electric heating by...
%
Dimensions of the basin: 306x510xh156 mm, for GN trays till 150 mm.NB: delivered without GN tray. Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), levelling cylinders, waterproofing "IPX4".Tank, with rounded corners, in AISI 304 stainless steel. Discharge valve.Electric heating by AISI 304 stainless steel armoured resistors, placed underneath the tank. ON/OFF switch, regulation from 30°C to 90°C.Appliances built in compliance with current standards (CE)
%
- Dimensiones tanque: 630x510xh156 mm, para cubas GN de hasta 150 mm. - Para el suministro automático de agua E17/BM8T ver A17/R2BM. - Nota: se suministra sin cubas Gastronorm.- De acero inoxidable AISI 304, "top" embutido de 15/10 mm de espesor, patas niveladoras, impermeable "IPX4" - Tanque con esquinas redondeadas, de acero inoxidable AISI 304. Válvula de drenaje. - Calefacción eléctrica con elementos calefactores blindados de acero inoxidable AISI 304, situados bajo el depósito....
%
- Tank dimensions: 630x510xh156 mm, for GN trays up to 150 mm. - For automatic water supply E17/BM8T See (A17/R2BM).- NB: delivered without gastronorm tray.- Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), levelling cylinders, waterproofing "IPX4". - Tank, with rounded corners, in AISI 304 stainless steel. Discharge valve. - Electric heating by AISI 304 stainless steel armoured resistors, placed underneath the tank. ON/OFF switch, regulation from 30°C to 90°C. - Appliances built...
%
Tank dimensions: 350x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Cooling capacity rendered 633 (W/f) for chamber volume 3,0 m³ / 3000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Cooling capacity rendered 824 (W/f) for chamber volume 5,0 m³ / 5000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Cooling capacity rendered 1258 (W/f) for chamber volume 10,2 m³ / 10200 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity rendered 1509 (W/f) for chamber volume 13,2 m³ / 13200 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity rendered 2313 (W/f) for chamber volume 27,8 m³ /27800 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity 2139 (W/f) for room volume 18,1 m³ / 18100 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard...
%
Cooling capacity 3490 (W/f) for room volume 34,3 m³ / 34300 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve.Also equipped with a high pressure switch (fixed calibration) (C-PMAX-R). Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a...
%
Cooling capacity 981 (W/f) for room volume 6,2 m³ / 6200 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a high...
%
Cooling capacity 1800 (W/f) for room volume 14,9 m³ / 14900 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a...
%
- Tank dimensions: 245x465xh170 mm, for GN containers up to 150 mm.- Made of stainless steel AISI 304, levelling feet. - Tank in AISI 304 stainless steel, equipped as standard with a perforated bottom grid, a drain cock (ball valve) is placed on the front of the appliance. - Electric heating, by means of stainless steel armoured resistances, placed under the bottom of the tank, outside. ON/OFF switch, temperature regulation from 30°C to 90°C, by thermostat. - The appliance is built in...
%
Tank dimensions: 510x465xh170 mm, for GN containers up to 150 mm. Made of stainless steel AISI 304, levelling feet.Tank in AISI 304 stainless steel, equipped as standard with a perforated bottom grid, a drain cock (ball valve) is placed on the front of the appliance.Electric heating, by means of stainless steel armoured resistances, placed under the bottom of the tank, outside. ON/OFF switch, temperature regulation from 30°C to 90°C, by thermostat.The appliance is built in compliance with all...
%
Tank dimensions: 510x465xh170 mm, for GN containers up to 150 mm. Made of stainless steel AISI 304, levelling feet.Tank in AISI 304 stainless steel, equipped as standard with a perforated bottom grid, a drain cock (ball valve) is placed on the front of the appliance.Electric heating, by means of stainless steel armoured resistances, placed under the bottom of the tank, outside. ON/OFF switch, temperature regulation from 30°C to 90°C, by thermostat.The appliance is built in compliance with all...
%
Dimensions of the basin: 325x535xh175 mm, for GN containers till 150 mm.Manufactured in stainless steel 18/10 AISI 304.Basin in stainless steel AISI 304, standard equipped with perforated bottom plate, (bullet) outlet tap is served frontally.Electric heating, through armoured resistances in stainless steel, placed straightly underneath the bassin. ON/OFF switch, Temperature regulation through thermostat from 30°C to 90°C.