%
4 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible (kit is not necessary),...
%
Dimensions of the basin 306x510xh156 mm. Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), levelling cylinders.Deep-drawn tank in AISI 316 stainless steel with rounded corners and double perforated bottom for draining food. GN capacity 1/1 h150 mm.Electric heating, vault with ceramic resistance placed above the appliance. ON/OFF switch with indicator light.Appliances built in compliance with current standards (CE).
%
Cooling capacity rendered 633 (W/f) for chamber volume 3,0 m³ / 3000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Cooling capacity rendered 824 (W/f) for chamber volume 5,0 m³ / 5000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Cooling capacity rendered 1258 (W/f) for chamber volume 10,2 m³ / 10200 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity rendered 1509 (W/f) for chamber volume 13,2 m³ / 13200 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity rendered 2313 (W/f) for chamber volume 27,8 m³ /27800 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity 2139 (W/f) for room volume 18,1 m³ / 18100 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard...
%
Cooling capacity 3490 (W/f) for room volume 34,3 m³ / 34300 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve.Also equipped with a high pressure switch (fixed calibration) (C-PMAX-R). Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a...
%
Cooling capacity 981 (W/f) for room volume 6,2 m³ / 6200 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a high...
%
Cooling capacity 1800 (W/f) for room volume 14,9 m³ / 14900 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a...
%
Tank dimensions 306x510xh175 mm. Construction in stainless steel AISI 304, "top" pressed (20/10 mm), leveling feet, water tightness "IPX5."Pressed tank in stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004) with rounded corners and perforated double bottom. GN 1/1 h150 mm capacity.Electric heating with ceramic resistance placed above the device. ON/OFF switch.Appliances built in compliance with current (CE) regulations.
%
- Useful tank dimensions 265x325xh150 mm.- Made of AISI 304 stainless steel. - AISI 304 18/10 stainless steel bowl with perforated bottom for draining food. - A vault with a ceramic resistor is placed above the appliance. ON/OFF switch. - The appliance is built in compliance with all current EC regulations.
%
Useful dimensions for the basin 325x530xh150 mm. Manufactured in stainless steel 18/10 AISI 304.Basin in stainless steel AISI 304 18/10 with perforated bottem which allows the abondant deep-frying oil to slink off.Equipped with a vault placed on top with an integrated ceramic resistance. ON/OFF switch.
%
Manufactured in stainless steel AISI 304.Electric heating by ceramic elements (infrared rays).ON/OFF switch.
%
- Dimensions tank 310x510xh180 mm.- Manufactured in stainless steel AISI 304, with adjustable feet in stainless steel- Top "pressed" with lateral edges.- Tank pressed stainless steel AISI 304 with perforated base.- Electric heating by armoured element in stainless steel, placed under the tank. Controlled temperature 30°C to 90°C by thermostat.
%
Tank 325x530xh150 mm.Designed for building-in 385x585 mmControl box delivered separately.Tank in stainless steel AISI 304, with perforated bottom for food draining.Vault with one ceramic element, put above the machine.ON/OFF switch, with indicator lamp.Manufactured in stainless steel AISI 304.
%
Useful tank dimensions 265x325xh150 mm. Made of AISI 304 stainless steel.AISI 304 18/10 stainless steel bowl with perforated bottom for draining food (Certified food-grade according to European regulation CE n.1935/2004).A vault with a ceramic resistor is placed above the appliance. ON/OFF switch.The appliance is built in compliance with all current EC regulations.
%
Useful dimensions for the basin 325x530xh150 mm. Made of stainless steel AISI 304.Basin in stainless steel AISI 304 (18/10 mm) with perforated bottem which allows the abondant deep-frying oil to slink off (Certified food-grade in compliance with European regulation CE n.1935/2004).Equipped with a vault placed on top with an integrated ceramic resistance. ON/OFF switch.The appliance is built in compliance with all current CE regulations.
%
Dimensions tank 310x510xh180 mm. Made of stainless steel AISI 304, adjustable jacks.Top (15/10 mm) in stainless steel AISI 304, IPX5 water resistance.Deep-drawn tank in stainless steel AISI 304, with all corners and internal angles rounded for an easy and hygienic maintenance, perforated bottom for food dripping.Heating bridge. Electric heating by means of stainless steel armoured resistances, placed under the bottom of the tank. Temperature regulation from 30°C to 90°C, by thermostat, front...
%
%
%