%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Flow rate: 3000 m³/o. (Pressure drop 380 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 4500 m³/o. (Pressure drop 220 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 2500 m³/o. (Pressure drop 210 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5600 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Delivered with stainless steel lidDelivered with standard slides 4x 1/4 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 5x GN1/4 h150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Delivered with stainless steel lid(s).Standard delivered slides 6x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 8x GN1/4 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Delivered with stainless steel lid(s).Standard delivered slides 9x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force