%
2 compressor groups and 2 evaporators, independent.Included: 2 grids GN 2/1 (530x650 mm) + 4 trays GN1/1-100 mm in polycarbonate.Fish refrigerator: evaporator at copper coil, embedded in the walls (3 sides), manual defrost, with water collecting tray, bottom fitted with a draining tap.4 adjustable stainless steel feet.Refrigerant Gas R290. Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt),...
%
Mixer with big flow: 35 liters/min.Output one hole 3/4" (Ø 29 mm).Wall attachment 115 mm.Flexible 1200-mm length.Flow of the nozzle 16 liters/min.
%
Flow rate (pressure 3 bar) tap 8 litres/minute, hand shower 12 litres/minute.Standard non-return valve (EN 1717 Belgaqua standard).Hand shower hose 60 mm (DVGW standards).Single hole outlet Ø min.27/max.35, thread length 50 mm, flexible hose G 3/8 female.Maximum pressure 10 bar (recommended 1-6 bar) and maximum temperature 90°C bar (recommended 90°C).
%
%
Mixer with big flow: 30 lit./min.Swan neck tap Ø 20 mm.Sprinkler length 1000 mm, wall attachment.Faucet flow 10 lit./min.Output one hole attachment (Ø 35 mm).
%
Flow rate (pressure 3 bar) tap 45 litres/minute, hand shower 16 litres/minute.Non-return valve as standard (standard EN 1717 Belgaqua.)Wall bracket 150 mmGooseneck Ø 25 mm (L.250mm).Hand shower hose 1050 mm (DVGW standards).Single hole outlet Ø min.27/max.35, thread length 80 mm, hoses G 1/2 femaleMaximum pressure 6.5 bar and maximum temperature 65°C bar.
%
Tap, flow: 18 liters/min.Output one hole 3/4" (Ø 29 mm).Wall attachment 115 mm.Flexible 1050-mm length.Flow of the nozzle 16 liters/min.
%
2 compressor groups and 2 evaporators, independent.Included: 2 x 2 grids GN2/1 (530x650 mm).Freezer: inner door fitted with warming resistance, copper coil evaporator, embedded in the walls (3 sides), manual defrost and depression valve, bottom fitted with a draining tap.4 adjustable stainless steel feet.Refrigerant gas R290 Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the...
%
Cooling capacity rendered 633 (W/f) for chamber volume 3,0 m³ / 3000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Cooling capacity rendered 824 (W/f) for chamber volume 5,0 m³ / 5000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Cooling capacity rendered 1258 (W/f) for chamber volume 10,2 m³ / 10200 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity rendered 1509 (W/f) for chamber volume 13,2 m³ / 13200 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity rendered 2313 (W/f) for chamber volume 27,8 m³ /27800 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity 2139 (W/f) for room volume 18,1 m³ / 18100 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard...
%
Cooling capacity 3490 (W/f) for room volume 34,3 m³ / 34300 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve.Also equipped with a high pressure switch (fixed calibration) (C-PMAX-R). Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a...
%
Cooling capacity 981 (W/f) for room volume 6,2 m³ / 6200 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a high...
%
Cooling capacity 1800 (W/f) for room volume 14,9 m³ / 14900 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a...
%
Flow rate (pressure 3 bar) tap 14 litres/minute, hand shower 12 litres/minute.Standard non-return valve (EN 1717 Belgaqua standard).Hand shower hose 40 mm.Single hole outlet Ø min.31/max.35, thread length 50 mm, flexible hose G 1/2 female.Maximum pressure 6 bar (recommended 1-6 bar) and maximum temperature 80 °C bar.
%
Ceramic mixer 17 liters/minute (14 liters/minute spout only / 17 liters/minute spout + handshower).Swan neck tap Ø 20 mm.Sprinkler length 2000 mm, wall attachment.Faucet flow 11 lit./min (3,5bar). Output one hole attachment 3/4'' (Ø 35 mm).
%
Tap, flow: 18 liters/min.Output one hole 3/4" (Ø 29 mm).Wall attachment 135 mm.Flexible 1000-mm length.Flow of the nozzle 12 liters/min.
%
%