%
- Water condenser.- Versatile pasto turbine cookers for cooking, tempering, pasteurizing and freezing all mixtures or pastes. - Multilingual display with 14 pre-programmed cycles and 10 programmable production cycles. - Different heat treatments are carried out in a single cylinder, avoiding any handling or transfer. - Possibility of slow, fast or intermittent agitation. - Automatic memory of the last cycle. - Mix per cycle: 30/60 litres. - Cycle time: 90/130 min.
%
%
- Air condenser.- Multifunctional pastoturbine for mixing, heating, pasteurizing, cooling and lashing all creams, sauces and mixes. - Adjustable times and temperatures. - Intuitive and easy to use "Touch Screen" control panel (18 pre-installed cycles: 9 for ice cream, 7 for pastry, 2 for gastronomy) with the possibility of inserting new recipes. - Manual or fully automatic cycle. - Pasteurization and lashing are carried out in a single cylinder, avoiding any handling or transfer. - Vertical...
%
- Air condenser.- Multifunctional pastoturbine for mixing, heating, pasteurizing, cooling and lashing all creams, sauces and mixes. - Adjustable times and temperatures. - Intuitive and easy to use "Touch Screen" control panel (18 pre-installed cycles: 9 for ice cream, 7 for pastry, 2 for gastronomy) with the possibility of inserting new recipes. - Manual or fully automatic cycle. - Pasteurization and lashing are carried out in a single cylinder, avoiding any handling or transfer. - Vertical...
%
- Water condenser.- Multifunctional pastoturbine for mixing, heating, pasteurizing, cooling and lashing all creams, sauces and mixes. - Adjustable times and temperatures. - Intuitive and easy to use "Touch Screen" control panel (18 pre-installed cycles: 9 for ice cream, 7 for pastry, 2 for gastronomy) with the possibility of inserting new recipes. - Manual or fully automatic cycle. - Pasteurization and lashing are carried out in a single cylinder, avoiding any handling or transfer. - Vertical...
%
- Water condenser.- Multifunctional pastoturbine for mixing, heating, pasteurizing, cooling and lashing all creams, sauces and mixes. - Adjustable times and temperatures. - Intuitive and easy to use "Touch Screen" control panel (18 pre-installed cycles: 9 for ice cream, 7 for pastry, 2 for gastronomy) with the possibility of inserting new recipes. - Manual or fully automatic cycle. - Pasteurization and lashing are carried out in a single cylinder, avoiding any handling or transfer. - Vertical...
%
- Air condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 30/60 litres. - Cycle time: 100/120 min.
%
- Air condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 30/60 litres. - Cycle time: 100/120 min.
%
- Water condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 30/60 litres. - Cycle time: 100/120 min.
%
- Water condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 30/60 litres. - Cycle time: 100/120 min.
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
- Water condenser- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
- Water condenser- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
General characteristics:AISI 304 stainless steel finish, between 12/10 mm and 30/10 mm thick, double cavity for better thermal and acoustic insulation (-60dB), adjustable stainless steel feet.Linear or angular implantations with left and right entries.Traction system with parallel stainless steel bars.Automatic advance system with 3 speeds.Ability to perform a continuous, basket-by-basket or delayedwash."Reversible" traction system, right left entry.Counter balanced wide opening doors with...
%
%
%
%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
Made of "anodized aluminum", food treated.Blade in stainless steel AISI 304.Sliding carriage with transparent Plexiglas protection.Cutting capacity : 200x260 mm.Sharpening device, delivered separately, with adapter.Cutting adjustment from 0-15 mm.Easily removable blade guard.No volt release" device that prevents the machine from starting during the cleaning phase.Low voltage control 24 V, protection class IP65.Safety microswitch on the blade.Blade cover ring (100% protection).The machine is...
%
Traction de la lame par volant manuelle, nécessitant aucune allimentation électrique.Lame en acier trempé, aiguisage automatique incorporé.Protège lame incorporé (norme CEE).Capacité de coupe 230x190 mm, réglage de coupe de 0-8 mm, course du chariot 230 mm, assiette 240x275 mm.Réalisée fonte (rouge vif) et aluminium anodisé.