%
"Thermopane" glass door, with stainless steel frame.Included: 3 grids GN 2/1 (530x650 mm).Inner door with warming elements and depression valve.4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Glass door (double...
%
Top in stainless steel of 1.5 mm thickness.Multiple spring system.Heating through resistance, adjustable thermostat going form 30°C to 120°C.Submerged control panel, spiral cable 1.5 m.4 swivel castors Ø 125.mm, 2 with brake.Handle and 4 angle shock absorbers, non marking.Manufactured in stainless steel AISI 304, double wall isolation.
%
Stainless steel base AISI 304 18/10.Electric heating, thermostat from 30° to 90°C.
%
%
- Air condenser.- Vertical turbine, ideal for restaurants, requires little maintenance and is very easy to use. - Easy installation due to its compact size. - Minimum mixing capacity 0.5 lit. and maximum 1 lit. - Noise level lower than 70 dB. - Cycle with time control or temperature control. - Vertical evaporator cylinders for a larger exchange surface. - Exclusive distribution device. - System self diagnosis. - Cycle time: 15/20 min. - Hourly production: 5 liters. NB: mainly for cold work.
%
2 compressor groups and 2 evaporators, independent.Included: 2 x 2 grids GN2/1 (530x650 mm).Freezer: inner door fitted with warming resistance, copper coil evaporator, embedded in the walls (3 sides), manual defrost and depression valve, bottom fitted with a draining tap.4 adjustable stainless steel feet.Refrigerant gas R290 Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the...
%
Vertical, straight-blade slicer.Double-feed carriage with a clamping arm holding firmly in place all types of hams and cold meats.Max. cutting capacity: 270xh250 (Ø 250 mm), slice thickness: 0-30 mm.50 mm gap between blade and body. Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.A maintenance Kit comes...
%
Large flow rate, for large distribution.German oblique blade "Grund & Bunse", inclination at 35°.Precise opening movement of the blade over the first 3 mm.Max. cutting capacity: 307xh220 mm (Ø 250 mm), thickness 0-24 mm.49 mm space between blade and frame. Compact, robust, elegant and efficient, made of cast anodized and polished aluminium alloy.Hardened, chrome-plated and ground steel blade, fixed protection ring and blade cover with microswitch (100% secure).Reinforced stop, protection...
%
Vertical, straight-blade slicer.Double-feed carriage for slicing large joints of raw meat.Max. cutting capacity: 250xh245 (Ø 245 mm), slice thickness: 0-30 mm.50 mm gap between blade and motor. Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.A maintenance Kit comes standard (incl. blade extractor).Carriage...
%
Capacity 17 levels GN 2/1 (or 34x GN 1/1).Standard 5 pair of slides and 5 plasticized grids GN 2/1. Stainless steel austenitic structure (food).Opening door at 120 °, with a vertical lock with a key code.Hinges with stop at 100 °, closing with automatic recall.Built-in compressor unit (ambient T ° 32 ° C).Refrigerant gas R290.digital display.Ventilated internal evaporator.Integrated control panel, digital display.Electronic controller with automatic defrost.Possibility of use GN 2/1 or GN...
%
Capacity 40 levels GN 2/1 (or 80x GN 1/1).Standard 10 pair of slides and 10 plasticized grids GN 2/1. Stainless steel austenitic structure (food).Opening door at 120 °, with a vertical lock with a key code.Hinges with stop at 100 °, closing with automatic recall.Built-in compressor unit (ambient T ° 32 ° C)Refrigerant gas R290Ventilated internal evaporator.Integrated control panel, digital display.Electronic controller with automatic defrost.Possibility of use GN 2/1 or GN 1/1, spaced 60...
%
Internal dimensions 660x420xh825Standard equipment: 1 grid EN 600x4003 "autoreverse" turbines. Welded room in stainless steel (AISI 304). , rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...
%
Timer from 0 to 60 minutes.Anodized aluminum and AISI 304 stainless steel construction.IMPORTANT: Please follow the instructions for use carefully! 1 fan.Rated output: 28g/h.For a concentration of 1ppm (parts per million), suitable for rooms up to 120m² / 360m³ (in 20 minutes), 240 m² / 720 m³ (in 40 minutes), 360m² / 1080 m³ (in 60 minutes).For a concentration of 2ppm (parts per million), suitable for rooms up to 60m² / 180m³ (in 20 minutes), 120 m² / 360 m³ (in 40 minutes), 180m² / 540 m³...
%
Timer from 0 to 60 minutes.AISI 304 stainless steel construction.IMPORTANT: Please follow the instructions for use carefully! 1 fan.Rated output: 56g/h.At a concentration of 1ppm (parts per million), suitable for rooms up to 240m² / 720m³ (in 20 minutes), 480 m² / 1440 m³ (in 40 minutes), 720m² / 2160 m³ (in 60 minutes).For a concentration of 2ppm (parts per million), suitable for rooms up to 120m² / 360m³ (in 20 minutes), 240 m² / 720 m³ (in 40 minutes), 360m² / 1080 m³ (in 60 minutes).
%
%
Made of ABS, easily removable tank, easy cleaning. Ventilated motor 2800 rpm.Standard 1 smooth knife and a mixer in ABS.Safety micro-switch.Lid in transparent Lexan, the addition of ingredients is possible thanks to a hole on the lid.Scraper as standard.Low voltage 24V controls, protection class (IP67), NVR (No-Voltage Release).
%
- Capacity kuip 6 Lit. (4 Kg) - Motor 1440 Tour/Min- Perfect for meat and vegetables, but also suitable for many other types of processing.- Completely made in AISI 304 stainless steel.- Blade driven by powerful ventilated asynchronous motor.- Highly robust tank in AISI 304 stainless steel, removable.- Easily removable interlocking lid to facilitate cleaning and sanitising.- Controls with IP 67 stainless steel buttons (recessed).- Hub of three blades, easily removable.- Maximum protection...
%
Capacity kuip 6 Lit. (4 Kg)Motor 1440 Tour/MinPerfect for meat and vegetables, but also suitable for many other types of processing.Completely made in AISI 304 stainless steel.Blade driven by powerful ventilated asynchronous motor.Highly robust tank in AISI 304 stainless steel, removable.Easily removable interlocking lid, as well as the blade cover, to facilitate cleaning and sanitising.Controls with IP 67 stainless steel buttons (recessed).Hub of three blades, easily removable.Maximum...
%
Manufactured entirely in stainless steel.This machine has been produced for a pasta production with raw materials like farina type 00, adding eggs and/or water and even spinach for green pasta or tomatoes for red pasta.Basically, it allows to mould pasta (capacity of the basin: 2 kg farina), as well as automatic production of pasta (hard semolina) (production 6 kg/h).Knife for automatic cutting of short or long pasta.Adjustable velocity.Standard delivered with 4 matrixes.n° 7 (1,5 mm) for...
%
Model 1 speed.Tank diameter 260 mm (10 liters) = 8 kg dough. Structure made of painted steel.Rotating cockpit (not removable) in stainless steel AISI 304.High hardness steel spiral, stainless steel divider AISI 304.Grid in stainless steel equipped with a security micro switch.Transmission by geared motor by oil bath, reliable, high-performance and silent!!Hanging motor, better ventilation, ease of maintenance.Low voltage control 24 V (IP65), NVR (No-Voltage Release) avoiding any unintentional...
%
%
Ventilated version, homogeneous distribution of the temperature.Height of the adjustable exposure base, GN containers, bottles, etc...Capacity 3x GN 1/1.Recessed dimensions 1090x690. Deep-drawn tank 115 mm (GN-100 mm trays), rounded corners and corners (perfect hygiene).1/2" drainVentilated cooling by a finned evaporator coupled to a fan, all placed under the tankControl panel with electronic regulation from 0° +4°, digital displayCFC-free expanded polyurethane insulationPredisposed for the...
%
Dough weight 210 to 600 gr. adjustable pizza diameter 260 to 400 mm. Very flexible and performing rolling machines.Front and lateral structure in stainless steel AISI 304, back carter in white sheet.Cold rolling, round shaped pizza dough (oblique top roller couple).Food suitable Teflon rollers; they have adjustable thickness grip, plexiglass top protection, bottom protection in stainless steel.Electric switches at low tension 24 Volts, finger touch.The equipment is manufactured following the...
%
Dough weight 210 to 600 gr. adjustable pizza diam. 260 to 400 mm. Very flexible and performing rolling machines.Front and lateral structure in stainless steel AISI 304, back carter in white sheet.Cold rolling, pizza dough on tray (parallel roller couples).Food suitable Teflon rollers, they have adjustable thickness grip, top protection in plexiglass, bottom protection in stainless steel.Electric switches at low tension 24 Volts, finger touch.Pedal control, delivered as standard.The equipment...