%
Stainless steel tank and drum AISI 304.Steel base (epoxy paint).Mechanic timer from 0 to 15 minutes.Delivered with bolts for the ground anchor.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Included: 3 grids GN 2/1 (530x650 mm).4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and reversible handle, closing by "triple chamber" and magnetic seal (easy replacement,...
%
- Air condenser.- Vertical turbine with automatic extraction. - Minimum mixing capacity 2 litres and maximum 4 litres. - Noise level below 70 dB. - Vertical evaporator cylinders for a larger exchange surface. - Cycle with time control or temperature control. - Exclusive distribution device. - System self diagnosis. - Cycle time: 10/15 min. - Hourly production: 20 litres. NB: mainly for cold work, delivered on wheels.
%
%
- Air condenser.- Vertical turbine with automatic extraction. - Minimum mixing capacity 2 litres and maximum 4 litres. - Noise level below 70 dB. - Vertical evaporator cylinders for a larger exchange surface. - Cycle with time control or temperature control. - Exclusive distribution device. - System self diagnosis. - Cycle time: 10/15 min. - Hourly production: 20 litres. NB: mainly for cold work, delivered on wheels.
%
Variable speed (Min. 53 rpm & Max. 517 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 10 L stainless steel tank.Table versions.Frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levelling.Fixed tank, automatic locking in working position.Protective plexiglass with safety device by microswitch.All parts in contact with the tank are made of stainless steel.Easy insertion and removal of utensils.When the...
%
%
Variable speed (Min. 65 rpm & Max. 551 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 40 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact with the...
%
%
Flow: 7000 m³/h. (with reduced pressure of 300 Pa).1020 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
Flow rate 7000 m³/H (pressure drop of 300 Pa).1020 rev/min.Internal fan double inlet transmission belt.Galvanized steel execution.Setting in aluminim profile.Indoor sound insulation.Lateral Inspection for S.A.V.Equipped with flexible sleeve to repression and anti-vibration pads.Motor 2 speeds closed, degree of protection IP54 (max temperature 80 ° C.).
%
Production 3600/1000 pieces/hour.Round portions 20 to 300 gr.Outside realization made of steel "epoxy painting".Lid with micro switch.Endless screw made in food aluminium.24 V low voltage control panel.Emergency stop switch.Dismountable for an easier mantenance.2 back wheels for an easyer transport.
%
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controlsVariable speed (10 rpm to 60 rpm), with Inverter.Side tables 1000x500 mm (foldable)Cylinder length 500 mmRoll opening 0 - 36 mm, rolling diameter 60 mmTravel speed 35 metres/minuteClosed overall dimensions 380x920xh1240.Standard: Harvesting bins under the mats, 2 harvesting terminals and 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of...
%
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controls.1 speed.Side tables 1000x500 mm (foldable).Cylinder length 500 mm.Roll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minute.Closed overall dimensions 380x920xh1240.Standard: Harvesting bins under the mats, 2 harvesting terminals and 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough sheet,...
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controlsVariable speed (10 rpm to 60 rpm), with Inverter.Side tables 700x500 mm (foldable)Cylinder length 500 mmRoll opening 0 - 36 mm, rolling diameter 60 mmTravel speed 35 metres/minuteClosed overall dimensions 380x920xh850.Standard: 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough sheet, constant production.Scrapers...
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controls.1 speed.Side tables 700x500 mm (foldable).Cylinder length 500 mm.Roll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minute.Closed overall dimensions 380x920xh850.Standard: 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough sheet, constant production.Scrapers and supports made with specific...
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with belt drive, 2 speed levels.3 double filtering.
%
Mechanical controls, mats manipulated by joystick.Base mounted version, 4 wheels, 2 fixed, 2 swivel wheels with brakes.Manual and pedal controls.Variable speed (10 rpm to 60 rpm), with Inverter.Side tables 1000x500 mm (foldable)Cylinder length 500 mmRoll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minuteClosed overall dimensions 580x920xh1940Standard: 2 stainless steel harvesting terminals, 2 pastry rollers.Strips made with specific materials for food use.Precise...
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with belt drive, 2 speed levels.3 double filtering.
%
Mechanical controls, mats manipulated by joystick.Base mounted version, 4 wheels, 2 fixed, 2 swivel wheels with brakes.Manual and pedal controls.1 speedSide tables 1000x500 mm (foldable)Cylinder length 500 mmRoll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minuteClosed overall dimensions 580x920xh1940Standard: 2 stainless steel harvesting terminals, 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough...