%
Temperature: -2° -14°C- Manufactured in solid wood.- Plexiglas dome.- Stainless steel AISI 304 display area.- Built-in airtight unit (ambient t° +32°C).- Static evaporator treated against the "coating" acids and the salts. - Refrigerant R134A.- Frame on castors.- Manual defrosting.NB: for the temperature update, this trolley needs to be connected on an electric network +/- 2 hours in advance ; then store the ice cream which might be at its service temperature (-14°C), this trolley isn't...
%
Turns/minute: 15000 rpm.On/Off switch, stainless steel screws.. ABS molded body, inner stainless steel and aluminium structure, polished aluminium hopper, 2 liters receiving receptacle en ABS molded.. Fitted with safety microswitch on hopper lever and receiving receptacle, fitted with thermal motor relay.. Sturdy belt-driven transmission, minimal power loss.. The equipment is manufactured following the (CE) standards in force.
%
Charging height diam. 365 mm (height glasses 325 mm). From 60 to 30 baskets/hour, 2 cycles, 60''-120''.Rotating (Upper and lower) wash and rinse arms.Self cleaning sprinklers.Tank (20 Lit., 2,1 kW) rounded edges, "stamped" bottom.Stamped walls.Stamped double walled doors, removable seal.Removable control panel.Automatic filling of the tank.Check valve.Hot water rinse (water consumption per cycle 2.4 liters), boiler (pressure) in stainless steel (6 Lit., 4.9 kW).Micro switch, when the door...
%
Version with incorporated water softener (ATTENTION: cold water connection).Charging height diam. 365 mm (height glasses 325 mm). From 60 to 30 baskets/hour, 2 cycles, 60''-120''.Rotating wash and rinse arms.Self cleaning sprinklers.Tank (20 Lit., 2,1 kW) rounded edges, "stamped" bottom.Stamped walls.Stamped double walled doors, removable seal.Removable control panel.Automatic filling of the tank.Washing pump 230V/1N 50Hz.Check valve.Hot water rinse (water consumption per cycle 2.4 liters),...
%
Version with incorporated drain pump.Charging height diam. 365 mm (height glasses 325mm). From 60 to 30 baskets/hour, 2 cycles, 60''-120''.Rotating wash and rinse arms.Self cleaning sprinklers.Tank (20 Lit., 2,1 kW) rounded edges, "stamped" bottom.Stamped walls.Stamped double walled doors, removable seal.Removable control panel.Automatic filling of the tank.Washing pump 230V/1N 50Hz.Check valve.Hot water rinse (water consumption per cycle 2.4 liters), boiler (pressure) in stainless steel (6...
%
Height of plates load Ø 365 mm (height glasses 325 mm).From 30 to 20 baskets/hour, PLD cycle 120'', 180'', continuously and ''Sanitisation''.3 phases: wash, unload, rinse.Standard discharge pump.Standard rinse pump (atmospheric boiler). Realization: entirely in stainless steel AISI 304. Rotating washing and rinsing arms (upper and lower) (made of composite material). Self-cleaning nozzles. Tank (20 lt - 2,1 kW) with rounded edges, "deep-drawn" bottom. Stamped basket slides, no roughness and...
%
Continuous water softener, incorporated (ATTENTION: connection to cold water).Height of plates load Ø 365mm (height glasses 325 mm).From 30 to 20 baskets/hour, PLD cycle 120'', 180'', continuously and "Sanitisation".3 phases: wash, unload, rinse.Standard discharge pump.Standard rinse pump (atmospheric boiler). Realization entirely in stainless steel AISI 304. Rotating washing and rinsing arms (upper and lower) (made of composite material). Self-cleaning nozzles. Tank (20 lt - 2,1 kW) with...
%
Turns per minute: 2600 rpm.Tank capacity: 3,3 Lt.Useful tank capacity: 1,5 Lt. Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use) (switchable 400V & 230V/3).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High safety guaranteed by a double...
%
Standard with speed drive.Turns per minute: 1100/2600 rpm.Tank capacity: 5,3 LtUseful tank capacity: 3,1 Lt Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use) (switchable 400V & 230V/3).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High...
%
%
- Turns/minute: rpm 145.- Duration of the production cycle 90-120 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control panel...
%
- Turns/minute : rpm 180.- Duration of the production cycle 120-150 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control...
%
Temperature setting on each tank (+2° to +8°C).Polycarbonate tanks, ABS cover, equipped with metering valve, completely removable for easy maintenance.Rotating pallet system (thus avoiding foam problems).Tropicalized thermal unit (ambient temperature +43°C).Refrigerant evaporator in stainless steel AISI 304.Refrigerant gas R290The device is built in compliance with the current CE standards.
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. Oura (not adjustable) widely sized....
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. Oura (not adjustable) widely sized....
%
Designed in stainless steel.ON/OFF switch.Shielded steel element heating, "hard-wearing".Strengthened protection cables for a better security without affecting the heat distribution.
%
Designed in stainless steel.ON/OFF switch.Shielded steel element heating.Strengthened protection cables for a better security, without affecting the heat distributionLateral supports for heating bridge.Chromium-plated feet, in the shape of "C".Free space underneath the heating bridge: 343 mm.
%
Ventilated refrigeration, temperature: +2° +10° .Light box.Internal dimensions 585x495xh1515 mmRefrigerant gas R600aStandard: 6 adjustable grids 574x405 mm. Exterior manufactured in plastic laminate (white), interior in molded ABS (white).Interior lighting, On-Off switchMechanical thermostat, with an analog display thermometer.Double glazing door (Thermopane®), reversible, with chassis in anodised aluminum, handle (very robust), door hinges with stop 100°, closing with magnetic seal.Included...
%
Ventilated refrigeration, temperature: +2° +10° .Light box.Internal dimensions 585x495xh1515 mmRefrigerant gas R600aStandard: 6 adjustable grids 574x405 mm. Exterior manufactured in plastic laminate (white), interior in molded ABS (white).Interior lighting, On-Off switchMechanical thermostat, with an analog display thermometer.Double glazing door (Thermopane®), reversible, with chassis in anodised aluminum, handle (very robust), door hinges with stop 100°, closing with magnetic seal.Included...
%
%
- Dimensions of the basin 240x380xh235 mm.- Oil capacity, min 5,5 lit., max 7 lit.- 1 chromed basket, dimensions 225x325xh90 mm.- Made of 304 stainless steel, deep-drawn "top" thickness 15/10 mm, adjustable cylinders, waterproof "IPX4". - Y-shaped deep-drawn tank with rounded corners, equipped with a cold zone. Made of AISI 304 stainless steel. Drain tap (ball valve). Stainless steel cover as standard. - Electric heating of the "Y" tank, by radiant elements placed under the tank, regulation...
%
Dimensions of the basin 240x380xh235 mm.Oil capacity, min 5,5 lit., max 7 lit.1 chromed basket, dimensions 225x325xh90 mm.Made of 304 stainless steel, deep-drawn "top" thickness 15/10 mm, adjustable cylinders, waterproof "IPX4".Y-shaped deep-drawn tank with rounded corners, equipped with a cold zone. Made of AISI 304 stainless steel. Drain tap (ball valve). Stainless steel cover as standard.Electric heating of the "Y" tank, by radiant elements placed under the tank, regulation from 105°C to...
%
Produces 24 kg per 24 hours, recessed version, Reserve in ABS (polyurethane insulation), capacity 4 kg.Air condenser."Spray" system with brass nozzles, (designed to prevent the magnetization of limestone).Tropicalized hermetic unit ambient temperature + 43 ° CRefrigerant gas R404a or R452a, air-cooled condenser.Manufactured in stainless steel AISI 304, adjustable feet.The equipment is manufactured following the (CE) standards in force.
%