%
Temperature: -2° -14°C- Manufactured in solid wood.- Plexiglas dome.- Stainless steel AISI 304 display area.- Built-in airtight unit (ambient t° +32°C).- Static evaporator treated against the "coating" acids and the salts. - Refrigerant R134A.- Frame on castors.- Manual defrosting.NB: for the temperature update, this trolley needs to be connected on an electric network +/- 2 hours in advance ; then store the ice cream which might be at its service temperature (-14°C), this trolley isn't...
%
Version for espresso coffee and American coffee (small lifting cup rest grill).Boiler capacity 18 litres.2 steam valves, tube and head steaming all stainless steel1 hot water outlet, electronic control, programmable.Supplied with 4 pouring spouts, 3x (2 cups) and 1x (1 cup) and "blind" filter for daily maintenance of the groups.Electronic machines with "volumetric" dosing unit, control keypad with backlit keys (double contact).Unit made of brass (chrome finish), heat guaranteed, with...
%
%
Version with discharge pump.Hot or cold water supply.Large load diameter (310 mm).AISI 304 stainless steel drum with "ACTIVEDRUM" system.Automatic weighing system.Removable filters.Simplified control system, several programs in memory.Display showing all the status of the programs.Possibility of MOP programs or special programs.Possibility of downloading programs via Wi-fi.Front and top panel in stainless steel AISI 304, side panels in titanium.Important: Predisposition for coin-operated...
%
Turns/minute: 15000 rpm.On/Off switch, stainless steel screws.. ABS molded body, inner stainless steel and aluminium structure, polished aluminium hopper, 2 liters receiving receptacle en ABS molded.. Fitted with safety microswitch on hopper lever and receiving receptacle, fitted with thermal motor relay.. Sturdy belt-driven transmission, minimal power loss.. The equipment is manufactured following the (CE) standards in force.
%
Turns per minute: 2600 rpm.Tank capacity: 3,3 Lt.Useful tank capacity: 1,5 Lt. Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use) (switchable 400V & 230V/3).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High safety guaranteed by a double...
%
Standard with speed drive.Turns per minute: 1100/2600 rpm.Tank capacity: 5,3 LtUseful tank capacity: 3,1 Lt Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use) (switchable 400V & 230V/3).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High...
%
%
- Turns/minute: rpm 145.- Duration of the production cycle 90-120 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control panel...
%
- Turns/minute : rpm 180.- Duration of the production cycle 120-150 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control...
%
Superior top 1.5 mm, rounded edges 70 mm.Pressed tank GN200 mm, corners rounded, drainage and overflow.Water level in the basin controlled by electro valve.Electric heating by element sited under tank.Ventilated cupboard, heated by electric element.Made in stainless steel with adjustable feet in stainless steel 150 mm.
%
Superior top 1.5 mm, rounded edges 70 mm.Pressed tank GN200 mm, corners rounded, drainage and overflow.Water level in the basin controlled by electro valve.Electric heating by element sited under tank.Ventilated cupboard, heated by electric element.Made in stainless steel with adjustable feet in stainless steel 150 mm.
%
Temperature setting on each tank (+2° to +8°C).Polycarbonate tanks, ABS cover, equipped with metering valve, completely removable for easy maintenance.Rotating pallet system (thus avoiding foam problems).Tropicalized thermal unit (ambient temperature +43°C).Refrigerant evaporator in stainless steel AISI 304.Refrigerant gas R290The device is built in compliance with the current CE standards.
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. Oura (not adjustable) widely sized....
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. Oura (not adjustable) widely sized....
%
Designed in stainless steel.ON/OFF switch.Shielded steel element heating, "hard-wearing".Strengthened protection cables for a better security without affecting the heat distribution.
%
Designed in stainless steel.ON/OFF switch.Shielded steel element heating.Strengthened protection cables for a better security, without affecting the heat distributionLateral supports for heating bridge.Chromium-plated feet, in the shape of "C".Free space underneath the heating bridge: 343 mm.
%
Ventilated refrigeration, temperature: +2° +10° .Light box.Internal dimensions 585x495xh1515 mmRefrigerant gas R600aStandard: 6 adjustable grids 574x405 mm. Exterior manufactured in plastic laminate (white), interior in molded ABS (white).Interior lighting, On-Off switchMechanical thermostat, with an analog display thermometer.Double glazing door (Thermopane®), reversible, with chassis in anodised aluminum, handle (very robust), door hinges with stop 100°, closing with magnetic seal.Included...
%
Ventilated refrigeration, temperature: +2° +10° .Light box.Internal dimensions 585x495xh1515 mmRefrigerant gas R600aStandard: 6 adjustable grids 574x405 mm. Exterior manufactured in plastic laminate (white), interior in molded ABS (white).Interior lighting, On-Off switchMechanical thermostat, with an analog display thermometer.Double glazing door (Thermopane®), reversible, with chassis in anodised aluminum, handle (very robust), door hinges with stop 100°, closing with magnetic seal.Included...
%
%
Produces 24 kg per 24 hours, recessed version, Reserve in ABS (polyurethane insulation), capacity 4 kg.Air condenser."Spray" system with brass nozzles, (designed to prevent the magnetization of limestone).Tropicalized hermetic unit ambient temperature + 43 ° CRefrigerant gas R404a or R452a, air-cooled condenser.Manufactured in stainless steel AISI 304, adjustable feet.The equipment is manufactured following the (CE) standards in force.
%
Production unit combined with a storage unit.Production 900 kg per 24/h.Air condenser.Refrigerant cylinder system with scraper(continuous production).Very low temperature ice from -5°C to -10°C.Tropicalized hermetic unit ambient temperature + 43 °CRefrigerant gas R404a or R452a Made of AISI 304 stainless steel.The device is built in compliance with the current CE standards.
%
Production unit combined with a storage unit.Production 900 kg per 24/h.Water condenser. Refrigerant cylinder system with scraper (continuous production).Very low temperature ice from -5°C to -10°C.Tropicalized hermetic unit ambient temperature + 43 °CRefrigerant gas R404a or R452a Made of AISI 304 stainless steel.The device is built in compliance with the current CE standards.
%
2 separate cooking zones (1x 2,1 kW and 1x 2,5 kW). Manufactured in stainless steel AISI 304, adjustable legs of stainless steel.Vitroceramic cooking field with infrared-ray. The most important quality of the vitro-ceramic system is the velocity of reaching the desired temperature and cooling. Power regulation through an energy switch, one per cooking field.