%
Temperature: -2° -14°C- Manufactured in solid wood.- Plexiglas dome.- Stainless steel AISI 304 display area.- Built-in airtight unit (ambient t° +32°C).- Static evaporator treated against the "coating" acids and the salts. - Refrigerant R134A.- Frame on castors.- Manual defrosting.NB: for the temperature update, this trolley needs to be connected on an electric network +/- 2 hours in advance ; then store the ice cream which might be at its service temperature (-14°C), this trolley isn't...
%
Included: 20 pairs of runners (600 x 800 mm).Inner door with heating resistance and under-pressure valve.4 adjustable stainless steel feet.Cooling gas R134.Interior and exterior made of (food) stainless steel AISI 304 (back made of galvanized steel), monocoque frame.Racks and rails in stainless steel (maximal capacity 27 slides, 50-mm spacing), which help to position the trays as one pleases, stamped inside bottom, with drain plug (major maintenance) and rounded angles and corners (without...
%
Included: 3 grids GN 2/1 (530x650 mm) by door.Inner door with warm resistance.Depression valve delivered standard.4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and...
%
Production 3600/800 pieces/hour.Round portions 20 to 1000 gr.Outside realization made of stainless steel.Lid with micro switch.Endless screw made in food aluminium.24V low voltage control panel.Emergency stop switch.Dismountable for an easier mantenance.4 wheels of witch 2 with brakes, easyer transport.
%
Turns/minute: 15000 rpm.On/Off switch, stainless steel screws.. ABS molded body, inner stainless steel and aluminium structure, polished aluminium hopper, 2 liters receiving receptacle en ABS molded.. Fitted with safety microswitch on hopper lever and receiving receptacle, fitted with thermal motor relay.. Sturdy belt-driven transmission, minimal power loss.. The equipment is manufactured following the (CE) standards in force.
%
Turns per minute: 2600 rpm.Tank capacity: 3,3 Lt.Useful tank capacity: 1,5 Lt. Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use) (switchable 400V & 230V/3).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High safety guaranteed by a double...
%
Standard with speed drive.Turns per minute: 1100/2600 rpm.Tank capacity: 5,3 LtUseful tank capacity: 3,1 Lt Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use) (switchable 400V & 230V/3).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High...
%
%
- Turns/minute: rpm 145.- Duration of the production cycle 90-120 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control panel...
%
- Turns/minute : rpm 180.- Duration of the production cycle 120-150 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control...
%
Professional machine designed to wipe and polish cutlery taken out of the dishwasher.Ideally designed for large and medium sized hotel or community activities.Productivity 130 covers per minute.Made of stainless steel.Support on wheels, 2 of which have brakes.Molded ABS tank.Quantity of ecological granules in tank 8.5 kg.Foldable" holder for standard receiving tray.With UV lamp as standard, for sterilizing cutlery.Hot air fan at "end of stroke".Supplied with 8.5 kg of vegetable aggregate and...
%
Capacity: 5x GN 1/1 (or) 5 x EN 600X400 (grids and plates optional).Production per cycle: 20 Kg (+70° C +3° C) or 12 Kg (+70° C -18°C).Core probe as standard.Anti-tilting" structure in stainless steel wire (removable), spacing for GN 1/1 (70 mm) & EN 600x400 (44 mm) plates.Door with integrated "non protruding" handle (On order reversible)Hinges with automatic return (90° locking).Insulation 60 mm thickness.Refrigerant expansion R404A by thermostatic expansion valve.4 adjustable stainless...
%
Capacity: 5x GN 1/1 (or) 5 x EN 600 X 400 (optional grills and plates).Prodution per cycle : 20 Kg (+70° C +3° C) or 12 Kg (+70° C -18° C).Core probe, serial."Anti tilt" Structure made of stainless steel wire (removable), space for trays GN 1/1 (70 mm) & EN 600x400 ( 44 mm).Door with integrated "non-projecting" handle (reversible on order).Top panel for access to the compressor unit, on hinges, easy inspection.Hinges with automatic return (blocking at 90 °).Insulation 60 mm...
%
Temperature setting on each tank (+2° to +8°C).Polycarbonate tanks, ABS cover, equipped with metering valve, completely removable for easy maintenance.Rotating pallet system (thus avoiding foam problems).Tropicalized thermal unit (ambient temperature +43°C).Refrigerant evaporator in stainless steel AISI 304.Refrigerant gas R290The device is built in compliance with the current CE standards.
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. Oura (not adjustable) widely sized....
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. Oura (not adjustable) widely sized....
%
Designed in stainless steel.ON/OFF switch.Shielded steel element heating, "hard-wearing".Strengthened protection cables for a better security without affecting the heat distribution.
%
Designed in stainless steel.ON/OFF switch.Shielded steel element heating.Strengthened protection cables for a better security, without affecting the heat distributionLateral supports for heating bridge.Chromium-plated feet, in the shape of "C".Free space underneath the heating bridge: 343 mm.
%
Ventilated refrigeration, temperature: +2° +10° .Light box.Internal dimensions 585x495xh1515 mmRefrigerant gas R600aStandard: 6 adjustable grids 574x405 mm. Exterior manufactured in plastic laminate (white), interior in molded ABS (white).Interior lighting, On-Off switchMechanical thermostat, with an analog display thermometer.Double glazing door (Thermopane®), reversible, with chassis in anodised aluminum, handle (very robust), door hinges with stop 100°, closing with magnetic seal.Included...
%
Ventilated refrigeration, temperature: +2° +10° .Light box.Internal dimensions 585x495xh1515 mmRefrigerant gas R600aStandard: 6 adjustable grids 574x405 mm. Exterior manufactured in plastic laminate (white), interior in molded ABS (white).Interior lighting, On-Off switchMechanical thermostat, with an analog display thermometer.Double glazing door (Thermopane®), reversible, with chassis in anodised aluminum, handle (very robust), door hinges with stop 100°, closing with magnetic seal.Included...
%
%
LED type light (patented)Possible to insert advertising images, protection made of transparent plexiglasProtected controls, with one inspection wicketPolycarbonate vats, ABS lid, with a measuring tap, entirely dismountable for an easiermaintenance.Refrigeration evaporator in stainless steel AISI 304.Refrigerant gas R290Temperature maintenance device for night time.
%
Produces 24 kg per 24 hours, recessed version, Reserve in ABS (polyurethane insulation), capacity 4 kg.Air condenser."Spray" system with brass nozzles, (designed to prevent the magnetization of limestone).Tropicalized hermetic unit ambient temperature + 43 ° CRefrigerant gas R404a or R452a, air-cooled condenser.Manufactured in stainless steel AISI 304, adjustable feet.The equipment is manufactured following the (CE) standards in force.
%
Produces 95 kg per 24 hours, storage in plastic, capacity 55 kg.18 g ice cubesRefrigerant gas R2904 lower regulation cylindersElectronic timer with automatic washing system "AWS”.Air condenser."Spray" system with brass nozzles, (designed to prevent the magnetization of limestone).Tropicalized hermetic unit ambient temperature + 43 ° CManufactured in stainless steel AISI 304, adjustable feet.The equipment is manufactured following the (CE) standards in force.