%
Temperature: -2° -14°C- Manufactured in solid wood.- Plexiglas dome.- Stainless steel AISI 304 display area.- Built-in airtight unit (ambient t° +32°C).- Static evaporator treated against the "coating" acids and the salts. - Refrigerant R134A.- Frame on castors.- Manual defrosting.NB: for the temperature update, this trolley needs to be connected on an electric network +/- 2 hours in advance ; then store the ice cream which might be at its service temperature (-14°C), this trolley isn't...
%
%
Realisation "double walled".Loading height for trays 650mmCID door (double wall) with automatic closing "soft contact" (partial opening for steam evacuation)Double door guillotine (isolated double wall) and counterbalanced.Standard rinsing pump (atmospheric boiler)Cycles 120''- 240'' - 360'' or continuous.Rotating washing and rinsing arms.Self-cleaning nozzles.Deep-drawn walls.Adjustable stainless steel feet (160-220 mm).Removable control panel.USB" port for software update.Pump increasing...
%
- Water condenser.- Vertical turbine with automatic extraction. - Minimum mixing capacity 7 lit. and maximum 12 lit. - Noise level below 70 dB. - Vertical evaporator cylinders for a larger exchange surface. - Cycle with time control or temperature control. - Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 75 litres. NB: mainly for cold work.
%
- Water condenser.- Vertical turbine with automatic extraction. - Minimum mixing capacity 7 lit. and maximum 12 lit. - Noise level below 70 dB. - Vertical evaporator cylinders for a larger exchange surface. - Cycle with time control or temperature control. - Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 75 litres. NB: mainly for cold work.
%
Turns/minute: 15000 rpm.On/Off switch, stainless steel screws.. ABS molded body, inner stainless steel and aluminium structure, polished aluminium hopper, 2 liters receiving receptacle en ABS molded.. Fitted with safety microswitch on hopper lever and receiving receptacle, fitted with thermal motor relay.. Sturdy belt-driven transmission, minimal power loss.. The equipment is manufactured following the (CE) standards in force.
%
Chambers: 2x 620x500x120 mm.Thermostatic control of the two chambers by 3 thermostats.Front side aesthetics "RUSTIQUE", made in high temperature painted steel, chassis in painted sheet.Chamber with top stainless steel arcade, avoiding the heat from going out when opening the door.Galvanised steel chamber, bottom in "special" refractory material.Door with heatless handle.Inner chamber light (except E3F/24R).Heating by top and bottom electric armoured elements, setting by thermostats (50 to...
%
Turns per minute: 2600 rpm.Tank capacity: 3,3 Lt.Useful tank capacity: 1,5 Lt. Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use) (switchable 400V & 230V/3).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High safety guaranteed by a double...
%
Standard with speed drive.Turns per minute: 1100/2600 rpm.Tank capacity: 5,3 LtUseful tank capacity: 3,1 Lt Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use) (switchable 400V & 230V/3).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High...
%
%
- Turns/minute: rpm 145.- Duration of the production cycle 90-120 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control panel...
%
- Turns/minute : rpm 180.- Duration of the production cycle 120-150 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control...
%
Temperature setting on each tank (+2° to +8°C).Polycarbonate tanks, ABS cover, equipped with metering valve, completely removable for easy maintenance.Rotating pallet system (thus avoiding foam problems).Tropicalized thermal unit (ambient temperature +43°C).Refrigerant evaporator in stainless steel AISI 304.Refrigerant gas R290The device is built in compliance with the current CE standards.
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. Oura (not adjustable) widely sized....
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. Oura (not adjustable) widely sized....
%
Designed in stainless steel.ON/OFF switch.Shielded steel element heating, "hard-wearing".Strengthened protection cables for a better security without affecting the heat distribution.
%
Designed in stainless steel.ON/OFF switch.Shielded steel element heating.Strengthened protection cables for a better security, without affecting the heat distributionLateral supports for heating bridge.Chromium-plated feet, in the shape of "C".Free space underneath the heating bridge: 343 mm.
%
Ventilated refrigeration, temperature: +2° +10° .Light box.Internal dimensions 585x495xh1515 mmRefrigerant gas R600aStandard: 6 adjustable grids 574x405 mm. Exterior manufactured in plastic laminate (white), interior in molded ABS (white).Interior lighting, On-Off switchMechanical thermostat, with an analog display thermometer.Double glazing door (Thermopane®), reversible, with chassis in anodised aluminum, handle (very robust), door hinges with stop 100°, closing with magnetic seal.Included...
%
Ventilated refrigeration, temperature: +2° +10° .Light box.Internal dimensions 585x495xh1515 mmRefrigerant gas R600aStandard: 6 adjustable grids 574x405 mm. Exterior manufactured in plastic laminate (white), interior in molded ABS (white).Interior lighting, On-Off switchMechanical thermostat, with an analog display thermometer.Double glazing door (Thermopane®), reversible, with chassis in anodised aluminum, handle (very robust), door hinges with stop 100°, closing with magnetic seal.Included...
%
%
Refrigerant expansion R290.Internal dimensions: 1180x510xh665 mm.Temperature: -15° -25°.Supplied as standard with 1 basket.External construction in white lacquered sheet steel.Sliding covers, natural aluminium frame, Thermopane® windows.Key lock (standard).Mechanical thermostat, T° -15° -25°.Analog thermometer, for displaying the internal temperature.On/Off switch.Hermetic unit for ambient temperature +32°C, ventilated condenser.Static evaporator, placed in the "coil" walls.Manual defrosting,...
%
%
Cooking surface 344x647 mm, 22.26 dm2.Regulation from 120°C to 280°C, safety thermostat Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Inclined cooking plate with high thermal conductivity, welded peripheral edge for perfect waterproofing. Drawer for collecting cooking juice (3 litres).Electric heating by stainless steel resistors, placed under the plate.Appliances built in compliance with current standards (CE)
%
Cooking surface 330x700 mm, 23.10 dm2.Regulation from 120°C to 280°C, safety thermostat Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), levelling cylinders, waterproof "IPX5".Inclined cooking plate with high thermal conductivity, welded peripheral edge for perfect waterproofing.Drawer for collecting cooking juice (3 litres).Electric heating by stainless steel resistors, placed under the plate.Appliances built in compliance with current standards (CE)