%
Stainless steel interior and exterior construction.Hourly production: 25 litres/hour.Tank capacity: 10 litres.Automatic filling, direct connection to the water network (with an overflow device).Temperature electronically adjustable by THERMOPID (80 - 98ºC).Tank with double probe to avoid dry heatingWith service valve, athermicLower shelf with removable upper grid, all made of stainless steel, easy to maintainMain switch On/Off, with indicator lightElectric resistance heatingAutomatic water...
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Included: 3 grids GN 2/1 (530x650 mm).4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and reversible handle, closing by "triple chamber" and magnetic seal (easy replacement,...
%
%
%
Variable speed (Min. 53 rpm & Max. 517 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 10 L stainless steel tank.Table versions.Frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levelling.Fixed tank, automatic locking in working position.Protective plexiglass with safety device by microswitch.All parts in contact with the tank are made of stainless steel.Easy insertion and removal of utensils.When the...
%
%
Variable speed (Min. 65 rpm & Max. 551 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 60 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact with the...
%
%
Production 3600/1000 pieces/hour.Round portions 20 to 300 gr.Outside realization made of steel "epoxy painting".Lid with micro switch.Endless screw made in food aluminium.24 V low voltage control panel.Emergency stop switch.Dismountable for an easier mantenance.2 back wheels for an easyer transport.
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controlsVariable speed (10 rpm to 60 rpm), with Inverter.Side tables 1000x500 mm (foldable)Cylinder length 500 mmRoll opening 0 - 36 mm, rolling diameter 60 mmTravel speed 35 metres/minuteClosed overall dimensions 380x920xh1240.Standard: Harvesting bins under the mats, 2 harvesting terminals and 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of...
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controls.1 speed.Side tables 1000x500 mm (foldable).Cylinder length 500 mm.Roll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minute.Closed overall dimensions 380x920xh1240.Standard: Harvesting bins under the mats, 2 harvesting terminals and 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough sheet,...
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controlsVariable speed (10 rpm to 60 rpm), with Inverter.Side tables 700x500 mm (foldable)Cylinder length 500 mmRoll opening 0 - 36 mm, rolling diameter 60 mmTravel speed 35 metres/minuteClosed overall dimensions 380x920xh850.Standard: 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough sheet, constant production.Scrapers...
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controls.1 speed.Side tables 700x500 mm (foldable).Cylinder length 500 mm.Roll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minute.Closed overall dimensions 380x920xh850.Standard: 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough sheet, constant production.Scrapers and supports made with specific...
%
Mechanical controls, mats manipulated by joystick.Base mounted version, 4 wheels, 2 fixed, 2 swivel wheels with brakes.Manual and pedal controls.Variable speed (10 rpm to 60 rpm), with Inverter.Side tables 1000x500 mm (foldable)Cylinder length 500 mmRoll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minuteClosed overall dimensions 580x920xh1940Standard: 2 stainless steel harvesting terminals, 2 pastry rollers.Strips made with specific materials for food use.Precise...
%
Mechanical controls, mats manipulated by joystick.Base mounted version, 4 wheels, 2 fixed, 2 swivel wheels with brakes.Manual and pedal controls.1 speedSide tables 1000x500 mm (foldable)Cylinder length 500 mmRoll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minuteClosed overall dimensions 580x920xh1940Standard: 2 stainless steel harvesting terminals, 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough...
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with belt drive, 2 speed levels.3 double filtering.
%
Included: 20 pairs of slides (400x600 mm).Inner door with warming element and depression valve.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel AISI 304, inside and outside (back in galvanized steel), monocoque frame.Stainless steel racks and slides (anti-tilting), allowing to place the plates as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal...
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with belt drive, 2 speed levels.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with belt drive, 2 speed levels.3 double filtering.
%
Superior top 1.5 mm, rounded edges."Pressed" tank GN-200 mm, corners rounded, drainage and overflow.Filling tank by electro-valve.Electric heating by element sited under the tank.Made in stainless steel AISI 304.Attention: plan an evacuation to the network.
%
%
Top 1,5 mm, rounded edge.Deep-drawn tank GN-200 mm, rounded corners, discharge and overflow.Filling of the tank by electrovalve.Electric heating by resistances located under the tank.Made of stainless steel AISI 304.Caution : Provide for a drain to the network.