%
- Version to fit in to or to put down. - Delivered with 2 pressure bottles, with one tap fit on to 3 exits (easy dosing).- Thermostatic control until 90°C, hold temperature = 50°C. (without overheating nor desiccation).- Electrical resistance around the stainless steel tray.- Electronic timer.
%
%
%
%
Good for small production : 30 kg/hour.Frame in aluminium alloy and stainless steel.Functionning by "cylinder" roll Ø 110 mm, provided with an upper lever (with safety microswitch device),opening 110x65 mm.Gear traction in oil bath.Engine in 1400 Tr / Minutes, equipped with thermal protection, low voltage control (24 V) Protected.
%
Capacity 4x GN 1/1.Recessed dimensions 1415x585. Deep-drawn tank 160mm deep (GN-150mm trays), rounded corners and corners (perfect hygiene)1/2" drain.Cooling by a coil evaporator (copper), placed just below the tankControl panel with electronic regulation of +2° +8°, digital displayCFC-free expanded polyurethane insulationPredisposed for the placement of an additional thermometer to display the T° on the customer side (On request)Integrated refrigeration unit, refrigerant R290aAutomatic...
%
Ventilated version, homogeneous distribution of the temperature.Height of the adjustable exposure base, GN containers, bottles, etc...Capacity 4x GN 1/1.Recessed dimensions 1415x690. Deep-drawn tank 115 mm (GN-100 mm trays), rounded corners and corners (perfect hygiene).1/2" drainVentilated cooling by a finned evaporator coupled to a fan, all placed under the tankControl panel with electronic regulation from 0° +4°, digital displayCFC-free expanded polyurethane insulationPredisposed for the...
%
2 distinct flat surfaces, the upper surface (service side) is placed 70 mm above the first (better visibility of the food)Capacity 3x GN 1/1.Recessed dimensions 1090x585. Flat surfaces, with a slightly raised peripheral edge, allowing for better food exposure.Cooling by means of a coil evaporator (made of copper), placed just below the plate .1/2" drainControl panel (service side) with electronic 0° +8° control, digital displayCFC-free polyurethane foam insulationPredisposed for the placement...
%
Exterior chassis in "aluminum alloy".The body of the chopper and the inside out leadscrew are also manufactured in treated "aluminum alloy" for food and stainless steel, all the interior parts are easily dismantled allowing easy maintenance.Upper bowl in stainless steel AISI 304.Standard delivered with a 6 mm grid.Grid and blade in stainless steel "auto-sharping".Wheel drive in oil bath.Low voltage control 24V.Aplliances are in compliance with standards (CE) in force.
%
Made of anodized aluminum alloy (food grade) and stainless steel, removable top cover, easy maintenanceVentilated motorTouch-sensitive controls.Optimal product evacuation, thanks to its inclined design, delivered with 2 expeller discs, 1 "top" and 1 "bottom". Continuous power supply, easy to work with, high safety guaranteed by micro switches on the lever and on the upper cover24V low voltage controls, protection class (IP54), NVR (No-Voltage Release) avoiding any involuntary start-up The...
%
Capacity 380 Lit.Equipped with: 4 adjustable grids, 499x360mm Load capacity: 455 cans 33cl or 217 bottles 50 cl.Interior made of ABS, exterior made of white lacquered steel.Mechanical thermostat.Digital thermometer.Key locks on the frame, delivered as standard.Door with handle (reversible)Light box and LED lights in the door frame, controlled by on/off switch.Ventilated evaporator type "ROLLBOND".Refrigerant R600a.Automatic defrosting with auto evaporation.2 unidirectional wheels and 2...
%
2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible (kit is not necessary),...
%
Glass doors with integrated LED-light.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without rougness).Doors with ergonomic handle and reversible...
%
"Wall" model with back board.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
"Wall" model with back board.Glass doors with integrated LED-light.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without rougness).Doors with...
%
Refrigeration unit on the left side.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
Sink 340x400x200mm integrated in the work top (right side), delivered with a siphon; drain screen and overflow (NB: tap on request, opening on the work top (27 mm))."Wall" model with turned-up back edge.4 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), per door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides...
%
Système de refroidissement par groupe monobloc, classe climatique 4 (température 30°C et humidité 55%). Évaporateur ventilé.Gaz réfrigérant R455a.Régulation électronique, température +2°C +8°C.Dégivrage automatique.
%
Produces 155 kg per 24 hours, storage in plastic, capacity 65 kg.18 g ice cubesAir condenser."Spray" system with brass nozzles, (designed to prevent the magnetization of limestone).Tropicalized hermetic unit ambient temperature + 43 ° CRefrigerant gas R404a or R452a, air-cooled condenser.Manufactured in stainless steel AISI 304, adjustable feet.The equipment is manufactured following the (CE) standards in force.
%
Production 22 kg/24h, storage in ABS, capacity 4 kg.Ice cubes of 13 g.4 lower regulation cylinders (110-660 mm)Air condenser."Spray" system with brass nozzles. (designed to prevent the magnetization of limestone).Tropicalized hermetic unit ambient temperature + 43 ° CRefrigerant gas R90Made in ABS, adjustable feet.The equipment is manufactured following the (CE) standards in force.
%
Produces 22 kg per 24 hours, storage in plastic, capacity 4 kg.13 g ice cubesRefrigerant gas R2904 lower regulation cylindersElectronic timer with automatic washing system "AWS".Air condenser."Spray" system with brass nozzles, (designed to prevent the magnetization of limestone).Tropicalized hermetic unit ambient temperature + 43 ° CManufactured in stainless steel AISI 304, adjustable feet.The equipment is manufactured following the (CE) standards in force.
%
Production 22 kg per 24 h, reserve in ABS, capacity 4 kg.13 g ice cubes4 lower regulation cylindersWater condenser."Spray" system with brass nozzles, (designed to prevent the magnetization of limestone).Tropicalized hermetic unit ambient temperature + 43 ° CRefrigerant gas R90Made in ABS, adjustable feet.The equipment is manufactured following the (CE) standards in force.
%
Production 22 kg per 24 h, reserve in ABS, capacity 4 kg.13 g ice cubesRefrigerant gas R2904 lower regulation cylindersElectronic timer with automatic washing system "AWS”.Water condenser."Spray" system with brass nozzles, (designed to prevent the magnetization of limestone).Tropicalized hermetic unit ambient temperature + 43 ° CRefrigerant expansion R290 by capillary.Made in stainless steel AISI 304, adjustable feet.The equipment is manufactured following the (CE) standards in force.
%
Energy class: D.Included: 3 grids (472x435 mm).4 adjustable stainless steel feet.Refrigerant R290. Made of stainless steel (food-grade), inside AISI 304/441 and outside AISI 441 (rear in treated steel, grey color), monocoque frame.Racks and guides in stainless steel (anti-tipping), allowing to position the grids as desired.Stamped inner bottom and rounded corners and angles (without asperities).Door with ergonomic handle (not protruding) and reversible (predisposition for key lock), closing...