%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Stainless steel base AISI 304 18/10.Electric heating, thermostat from 30 to 90°C.Adjustable thermostat from 30°C to 90°C.Rubber feets.
%
%
%
%
Flow rate: 2500 m³/o. (Pressure drop 210 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Three-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3400 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Expansion refrigerant R600aInternal dimensions: 890x510xh715Mechanical thermostat, T° -23° +10Digital thermometer.Internal capacity 289 liters. Double temperature (refrigeration/freezing)Solid lid, sliding.Digital thermometer.On/Off switch.Hermetic unit for ambient T° +32°, ventilated condenser.Static evaporator, placed in the "serpentine" walls.Manual defrost.External construction in white painted steel sheet.Internal realization, embossed aluminium.Insulation in CFC-free polyurethane.Frame...
%
%
Dough weight 80 to210 gr. adjustable pizza diameter 140 to 310 mm. Very flexible and performing rolling machines.Front and lateral structure in stainless steel AISI 304, back carter in white sheet.Cold rolling, round shaped pizza dough (oblique top roller couple).Food suitable Teflon rollers; they have adjustable thickness grip, plexiglass top protection, bottom protection in stainless steel.Electric switches at low tension 24 Volts, finger touch.The equipment is manufactured following the...
%
2 distinct flat surfaces, the upper surface (service side) is placed 70 mm above the first (better visibility of the food)Capacity 2x GN 1/1Built-in dimensions 765x585 Flat surfaces, with a slightly raised peripheral edge, allowing for better food exposure.Cooling by means of a coil evaporator (made of copper), placed just below the plate .1/2" drainControl panel (service side) with electronic 0° +8° control, digital displayCFC-free polyurethane foam insulationPredisposed for the placement of...
%
Capacity 3x GN 1/1.Recessed dimensions 1090x585. Flat surface, with a slightly raised peripheral edge, allowing better food exposure.Cooling by a coil evaporator (copper), placed just below the plate.Drain 1/2"Control panel with electronic regulation from 0° +8°, digital displayCFC-free expanded polyurethane insulationPredisposed for the placement of an additional thermometer to display the T° on the customer side (On request)Integrated refrigeration unit, refrigerant R290aAutomatic...
%
Turns/minute: rpm 15000. Created for low productions.Engine block with PVC body, ergonomic handle.Protection IP34.The pipe can be dismantled.Stainless steel AISI 304 mixer pipe, knife and cover. The knife is easily removable.On/Off switch, direct starting up ("DVC" device with constant speed, series fitted).Safety device in case of overheating.Appliances are complied with the CE in force.
%
Structure in AISI 304 stainless steel.Polycarbonate tank (capacity from 3 to 5.5 litres), with 2-part lid for easy filling, equipped with a "self-cleaning" metering tap.Vertical evaporator, made of AISI 304 stainless steelRefrigerant gas R290, vertical mixing system "exclusive patent" guaranteeing perfect homogeneity (without foam formation!).Very versatile, regulating the fineness of the "granita".Fully removable, making daily maintenance easier.Appliances built in compliance with the...
%
Temperature setting on each tank (+2° to +8°C).Polycarbonate tanks, ABS cover, equipped with metering valve, completely removable for easy maintenance.Rotating pallet system (thus avoiding foam problems).Tropicalized thermal unit (ambient temperature +43°C).Refrigerant evaporator in stainless steel AISI 304.Refrigerant gas R290The device is built in compliance with the current CE standards.
%
%
2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible (kit is not necessary),...
%
Glass doors with integrated LED-light.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without rougness).Doors with ergonomic handle and reversible...
%
"Wall" model with back board.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
Sink 340x400x200mm integrated in the work top (right side), delivered with a siphon; drain screen and overflow (NB: tap on request, opening on the work top (27 mm))."Wall" model with turned-up back edge.2 ventilated evaporators. Included: 1 grid GN 1/1 (530x325 mm), per door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides...
%
"Wall" model with back board.Glass doors with integrated LED-light.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without rougness).Doors with...
%
Refrigeration unit on the left side."Wall" model with back board.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with...