%
- Air condenser.- Multifunctional pastoturbine for mixing, heating, pasteurizing, cooling and lashing all creams, sauces and mixes. - Adjustable times and temperatures. - Intuitive and easy to use "Touch Screen" control panel (18 pre-installed cycles: 9 for ice cream, 7 for pastry, 2 for gastronomy) with the possibility of inserting new recipes. - Manual or fully automatic cycle. - Pasteurization and lashing are carried out in a single cylinder, avoiding any handling or transfer. - Vertical...
%
- Air condenser.- Multifunctional pastoturbine for mixing, heating, pasteurizing, cooling and lashing all creams, sauces and mixes. - Adjustable times and temperatures. - Intuitive and easy to use "Touch Screen" control panel (18 pre-installed cycles: 9 for ice cream, 7 for pastry, 2 for gastronomy) with the possibility of inserting new recipes. - Manual or fully automatic cycle. - Pasteurization and lashing are carried out in a single cylinder, avoiding any handling or transfer. - Vertical...
%
3 Filters ANTI-FAT labyrinths (2x 400x500 & 1x 500x500 mm) Model with built-in centrifugal fan "watertight" (IP55) (central position, in vertical).Designed in stainless steel AISI 441, assembly by points welding.Filters anti-fat has stainless steel labyrinths AISI 430.Peripheral channel for the fat collection, fitted with a drainage tap.Built-in lighting (LED) waterproof (IP65), high temperature.Speed regulator built-in the frontal.
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
- Water condenser- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
- Water condenser- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
Internal dimensions 660x420xh450Standard equipment: 1 grid EN 600x4001 "autoreverse" turbines. Welded room in stainless steel (AISI 304). , rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...
%
Vacuum pump capacity 250m3/h (Busch type).Cycle time 15-30 seconds.Stainless steel cover.Chamber dimensions: 2x 840x830xh250 mm (Sealing length: 4 x 840mm).Working height 900 mm.4 sealing bars (2 per chamber)Digital control panel with 10 programs, maintenance program and pump cleaning.Soft air: gradual vacuuming.On request: gas injection system "nitrogen", ....Professional machines on pedestals.Vacuum is managed in % thanks to the integrated vacuum sensor, no more risk of inadvertent...
%
Frame in stainless steel, all the parts that are in contact with the dough are also in stainless steel.Adjustement of the thickness from the sheet.Warning device to protect the roller.
%
2 separate cooking zones Ø 230 mm (2x 3,5 kW). Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), levelling cylinders, waterproof "IPX4".Ceramic glass induction hob (6 mm). Focus diameter 230 mm, energy regulator.Principle of INDUCTION: The heat is produced by a magnetic field directly inside the container, this field is created electronically, there is no heating element, which gives it great security. Cooking is done almost without any heat loss; it is the most economical...
%
2 separate cooking zones Ø 230 mm (2x 3,5 kW).Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), levelling cylinders, waterproof "IPX4".Ceramic glass induction hob (6 mm). Focus diameter 230 mm, energy regulator.Principle of INDUCTION:The heat is produced by a magnetic field directly inside the container, this field is created electronically, there is no heating element, which gives it great security. Cooking is done almost without any heat loss; it is the most economical...
%
Plate (370x585mm), with 2 cooking zones (2x 2,5kW)Made of AISI 304 stainless steel, "Top stamped" (15/10 mm), adjustable cylindersCooking surface, waterproof "IPX4".Plate (15 mm) in "thermo-diffuser" steel, heated by resistors positioned below.Combustion chamber thermally insulated with glass wool.Control by 8-position switch (each cooking zone), with indicator lightAppliances built in compliance with current standards (CE)
%
2 separate cooking zones Ø 220 mm (2x 3,5 kW). Made of stainless steel AISI 304, adjustable cylinders.Watertight top (15/10 mm) in AISI 304 stainless steel.Rear chimney in stainless steel AISI 304.Cooking top, watertight "IPX4".Glass ceramic hob (6 mm), with 4 independent inductors underneath.Energy regulator with 6 positions (each hearth), with pilot light, front access for easy maintenance.INDUCTION Principle: The heat is produced by a magnetic field directly inside the container, this...
%
- 2 separate cooking zones Ø 220 mm (2x 3,5 kW).- Manufactured in stainless steel AISI 304, submerged "top", adjustable feet in stainless steel.- Cooking surface, watertight "IPX4".- Vitroceramics induction plate, (6 mm), with 4 inductors. - Energy regulator 6 positions (each cooking zone), with control lamp. - Principe of INDUCTION: Heat is generated directly by a magnetic field inside the container, this field is created electronically, there is no heating element, which makes it very safe....
%
- Standard with electric switch.- Useful capacity of the tank (+/- 7 liters).- Basket dimensions 220x190xh110mm.- Designed in stainless steel, fitted with 2 lateral and thermal handles. - Stainless steel baskets ("strengthened") with thermal handle.- Stainless steel tank AISI 304, fitted with a lid.- Drain tap, equipped with a safety device. - Shielded element heating "treated" and immersed in the tank.- Cold area: no carbonization of the wastes, no taste transmission.-Thermostat from 0° to...
%
%
Version 2 drawers GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Burner in painted cast iron with brass crown with high heat conductibility (1x 7kW).Lighting by back-burner, thermocouple protection.Cast iron grid armature and more robust stainless steel structure (reinforced).Reduction grid for burner (stainless steel).Removable stainless steel bowl and burner for easy maintenance.Enamelled grill 350 x 290 mm.Manufactured in stainless steel.4 lower cylinders, adjustable.The device is built in compliance with the current CE standards.
%
Capacity: 10x GN1/4, 1x 1/9 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic...
%
Capacity: GN 12x 1/4, 1x 1/9 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at...
%
Capacity: GN 10x1/3 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Capacity: GN 11x 1/3, 1x 1/9 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at...
%