%
Body in ABS.Startup by detection using an infra-red sensor, regulation of the operating range.Powerful jet of warm air.The hands to be dried in 20-30 second.Aspiration of air by the top of dry the hands.Protection IPX3, CE normes.
%
- Air condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 30/60 litres. - Cycle time: 100/120 min.
%
- Air condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 30/60 litres. - Cycle time: 100/120 min.
%
1 chamber: 1240x660xh180mm.Capacity: 3x 600x400 mm. Stackable oven modules, designed for medium productivity.External construction in AISI 304 stainless steel.The floor of the furnace is made of thermo diffusing steel.Height of the baking vault 180 mm.Ideally suited for baking on platters.Mould made of AISI 430 stainless steel.Heating by shielded resistors on the vault as well as under the floor of the oven.Oven door with stainless steel handle, equipped with a large safety glass.Oura for...
%
Stainless steel construction.Each plate with lighted On/Off switch.NB: delivered without carafes4 lower feet in ABSThe device is built in compliance with the current CE standards.
%
Chambrer 720x1080xh150 mm (7,8 kW)6 pizzas ofdiam. 350 mm (or) 2 pizzas of diam. 500 mm2 ovens superposable (6+6)Chamber in stainless steel, refractory stone floor.Electric blowhole "oura" internal lighting, for smokes-steam.Inside lightning recessed "high temperature"."Counterbalanced" door, "panoramic" window in securit glass.Heating through armored resistances in stainless steel, put under the base and on the oven vault, arch in stainless steel avoiding the temperature dropping when...
%
Production capacity 160 kg (250 Lt)Flour capacity 106 kg2 speeds, automatically adjustable (Spiral: 1st Speed 111 rpm and 2nd Speed 223 rpm) & (Tank: 15 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 900xh430 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbines Chamber with rounded corners.Easily removable" counter-door seal.Easily removable plate-holder structure (75 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Double-glazed athermic door (4 mm), hinged intermediate pane for easy maintenance. Ergonomic athermic handle, self-closing. Micro-switch to stop...
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Thermoformed ABS cheeks, front and back in laminated sheet metal.Tempered glass windows, right front window at 90°, window lifting system with hydraulic pistons.Anodized aluminum profiles.Exhibition made of AISI 304 stainless steel, depth 900 mm (EURONORM and GASTRONORM).AISI 304 stainless steel worktop.LED lighting for the exhibition (positioned under the upper glass).Ventilated evaporator, treated against corrosion from food acids.Built-in compressor unit, climate class 4 (+30°C & RH...
%
Saladette capacity GN 1 x 1/1, 2 x 1/2, 3 x 1/9, h150 mm (optional vats).Telescopic and flip-top cover in stainless steel.Shelf in polyethylene (food).1 ventilated eveporator.With: 1 grid GN 1/1 (530x325 mm), per door.4 adjustable stainless steel feet.Monocoque designInternal construction in stainless steel (Food) AISI 304, external AISI 441.Top in AISI 304 stainless steel.Built-in upper refrigerated structure with a cover.Racks and slides in stainless steel (anti-tilt), allowing the grids to...
%
%
2 temperatures (upper room +5° +10°C, below room +10° +18°C)Capacity 45bottles (75 cl.)Door frame and handle in stainless steel.Standard: 6 shelves with drawer made of wood.Lockable with keys. External made of lacquered steel (BLACK), thermoformed ABS insideGlass door (reversible), double glazing "Thermopane®", closure by magnetic seal.Electronic control for constant temperature, with digital display.Internal LED lighting.Integrated compressor unit climatic class 4 (30°C & 55% HR).Sound...
%
Supplied with 1 grid GN 1/12 fans "autoreverse" Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Easily removable" counter-door seal.Deep-drawn bottom collects condensation towards discharge.Easily removable plate-holder structure (75 mm).Easily removable deflectors.Condensate drain.Motor(s) with "autoreverse" turbines (2800 rpm) guarantee even heat distribution.Door: athermic, double-glazed (4 mm), intermediate pane hinged for easy maintenance.Ergonomic,...
%
1 temperature (+5° +18°C)Capacity 45 bottles (75 cl.)Door frame and handle in stainless steel.Standard: 4 shelves with drawer made of wood.With key lock. External made of lacquered steel (BLACK), thermoformed ABS insideGlass door (reversible), double glazing "Thermopane®", closure by magnetic seal.Electronic control for constant temperature, with digital display.Internal LED lighting.Integrated compressor unit climatic class 4 (30°C & 55% HR).Sound level 40 dB (A).Evaporator...
%
%
4 drawers version GN 1/1 (max. load Height 110 mm).1 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque design.Inside and outside (top included) manufactured in stainless steel AISI 304 (also the back).Stamped interior bottom, rounded angles and corners (no rough edges).Drawers with ergonomic handles, on telescopic runners, closed by magnetic pressure seals (easy replacement, no tools required).Class 5 compressor unit (40°C Temperature & 40% Humidity), built into...
%
%
%