%
Connection cold or warm water.Upper basin with 3 compartments for washing products.Emergency stop button, "Hot shot" kind.Stainless steel base allowing the ground anchor.Designed in stainless steel AISI 304.
%
- Water condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 60/120 litres. - Cycle time: 100/120 min.
%
- Water condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 60/120 litres. - Cycle time: 100/120 min.
%
Stainless steel construction.Each plate with lighted On/Off switch.NB: delivered without carafes4 lower feet in ABSThe device is built in compliance with the current CE standards.
%
Internal dimensions 660x420xh820Standard equipment: 1 grid EN 600x4003 "autoreverse" turbines. Welded room in stainless steel (AISI 304). , rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...
%
%
%
%
4 separate cooking zones Ø 230 mm (4x 3,5 kW).Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), levelling cylinders, waterproof "IPX4".Ceramic glass induction hob (6 mm). Focus diameter 230 mm, energy regulator.Principle of INDUCTION:The heat is produced by a magnetic field directly inside the container, this field is created electronically, there is no heating element, which gives it great security. Cooking is done almost without any heat loss; it is the most economical...
%
Produces 130 kg per 24 hours, storage in plastic, capacity 65 kg.18 g ice cubesRefrigerant gas R2904 lower regulation cylindersElectronic timer with automatic washing system "AWS”.Air condenser."Spray" system with brass nozzles, (designed to prevent the magnetization of limestone).Tropicalized hermetic unit ambient temperature + 43 ° CManufactured in stainless steel AISI 304, adjustable feet.The equipment is manufactured following the (CE) standards in force.
%
Produces 130 kg per 24 hours, storage in plastic, capacity 65 kg.42 g ice cubesRefrigerant gas R2904 lower regulation cylindersElectronic timer with automatic washing system "AWS”.Air condenser."Spray" system with brass nozzles, (designed to prevent the magnetization of limestone).Tropicalized hermetic unit ambient temperature + 43 ° CManufactured in stainless steel AISI 304, adjustable feet.The equipment is manufactured following the (CE) standards in force.
%
Production 130 kg per 24/h, reserve in ABS, capacity 65 kg.Refrigerant gas R452aIce cubes of 18 gWater condenser. "Spray" system with brass nozzles, (designed to prevent the magnetization of limestone).Tropicalized hermetic unit ambient temperature + 43 ° CManufactured in stainless steel AISI 304, adjustable feet.The equipment is manufactured following the (CE) standards in force.
%
Production 280 kg/24/h. to combine with a storage unit.Air condenser. System with helicoidal fillings (continuous production).Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290.Manufactured in stainless steel AISI 304.The equipment is manufactured following the (CE) standards in force.
%
Production 280 kg/24/h. to combine with a storage unit.Water condenser. System with helicoidal fillings (continuous production).Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290.Manufactured in stainless steel AISI 304.The equipment is manufactured following the (CE) standards in force.
%
- 5 independent plates, Ø 180 mm (5x 2 kW). - Electric convection oven GN 1/1 (3 kW), 530x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- 5 independent plates, Ø 180 mm (5x 2 kW). - Electric convection oven GN 1/1 (3 kW), 530x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- Useful dimensions of the cooking surface 995x520 mm, 49,40 dm2- Manufactured in stainless steel 18/10 AISI 304.- Cooking plates in cast iron with high conduction of heath, equipped with a welded peripheral border, to guarantee a perfect cover-up. Frontal catching drawer for cook fluid.- Electric heating, through stainless steel resistance, situated under the plate itself. Temperature regulation through a thermostat from 120°C to 320°C.Version : - with hard chrome plate "50 µm".
%
4 zones Ø 220 mm independent (4x 3,5 kW).AISI 304 stainless steel construction, adjustable cylindersWatertight top (15/10 mm) in AISI 304 stainless steel.Rear chimney in stainless steel AISI 304.Cooking top, watertight "IPX4".Glass ceramic hob (6 mm), with 4 independent inductors underneath.Energy regulator with 6 positions (each hearth), with pilot light, front access for easy maintenance.INDUCTION Principle: The heat is produced by a magnetic field directly inside the container, this field...
%
Plate (755x625 mm), with 4 zones (4x 3,5 kW)Open cupboard (GN 2/1) (760x740xh360 mm).Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304.Cooking surface, watertight "IPX4".Plate (15 mm) in cast iron, heating by resistors positioned below.Combustion chamber thermally insulated with glass wool.Regulation (+/- de 80° to 450°C) by 7-position switch (each fireplace),...
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%