%
Solid beech wood frame with plywood base and sides. Wenge finish.Stainless steel bowl GN , 150 mm deep.Heating with submerged electric resistance protected by grids. Digital thermometer/thermostat.Knife holder, Swivel castors.
%
Solid beech wood frame with plywood base and sides. Wenge finish.Stainless steel bowl GN, 150 mm deep.Heating with submerged electric resistance protected by grids. Digital thermometer/thermostat.Knife holder, Swivel castors.
%
Version for espresso coffee and American coffee (small lifting cup rest grill).Boiler capacity 5 litres.1 steam tap, tube and head vaporizing all stainless steel.1 hot water tap.Supplied with 2 pouring spouts, 1x (2 cups) and 1x (1 cup) and "blind" filter for daily maintenance of the groups.Electronic machines with "volumetric" dosing unit, control keypad with backlit keys (double contact).Unit made of brass (chrome finish), heat guaranteed, with pre-infusion, solenoid valve for each...
%
%
Stainless steel construction.Each plate with lighted On/Off switch.NB: delivered without carafes4 lower feet in ABSThe device is built in compliance with the current CE standards.
%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
Cooling capacity rendered 2313 (W/f) for chamber volume 27,8 m³ /27800 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Saladette capacity GN 1 x 1/1, 2 x 1/2, 3 x 1/9, h150 mm (optional vats).Telescopic and flip-top cover in stainless steel.Shelf in polyethylene (food).1 ventilated eveporator.With: 1 grid GN 1/1 (530x325 mm), per door.4 adjustable stainless steel feet.Monocoque designInternal construction in stainless steel (Food) AISI 304, external AISI 441.Top in AISI 304 stainless steel.Built-in upper refrigerated structure with a cover.Racks and slides in stainless steel (anti-tilt), allowing the grids to...
%
Cooling capacity 2463 (W/f) for chamber volume 30,5 m³ / 30500 Lit (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve. Supplied with a cable for the connection of the door heater. Ceiling" refrigeration units.All units are supplied as standard with a high pressure switch and KVL valve as well as cables for door and light micro-switches.Separate control panel, connected to the unit by a 5m cable, control of the functions by microprocessor with...
%
Inside volume: 122 liters.Inside dimensions: 508x355xh720 mm.Load capacity: 161 cans (33 cl.) or 84 bottles (33 cl.).1 swingdoor on hinges, (reversible).Included: 2 grids 498x335 mm.Cooling R600a.Glass door(s), double glazing, "Thermopane"®.Closure by keys.Interior lighting type LED.Included: for each door, 2 adjustable shelves and removable height.Built-in compressor unit climatic class 4 (30°C & 55% HR).Sound level 45 db (A).Electronic regulation, digital display T ° + 2 ° + 10...
%
%
2 temperatures (upper room +5° +10°C, below room +10° +18°C)Capacity 45bottles (75 cl.)Door frame and handle in stainless steel.Standard: 6 shelves with drawer made of wood.Lockable with keys. External made of lacquered steel (BLACK), thermoformed ABS insideGlass door (reversible), double glazing "Thermopane®", closure by magnetic seal.Electronic control for constant temperature, with digital display.Internal LED lighting.Integrated compressor unit climatic class 4 (30°C & 55% HR).Sound...
%
1 temperature (+5° +18°C)Capacity 45 bottles (75 cl.)Door frame and handle in stainless steel.Standard: 4 shelves with drawer made of wood.With key lock. External made of lacquered steel (BLACK), thermoformed ABS insideGlass door (reversible), double glazing "Thermopane®", closure by magnetic seal.Electronic control for constant temperature, with digital display.Internal LED lighting.Integrated compressor unit climatic class 4 (30°C & 55% HR).Sound level 40 dB (A).Evaporator...
%