%
Production: 10/12 oranges (maximum diameter 70 mm) per minute.Storage capacity: 3 oranges.Loading ramp and recovery tank supplied as standard.Pressure control.Made of "food" materials that do not undergo any alteration in contact with orange juice.Designed for easy maintenance, exterior and interior.Automatic shutdown.
%
Version for espresso coffee and American coffee (small lifting cup rest grill).Boiler capacity 6,5 litres.1 steam tap, tube and head vaporizing all stainless steel.1 hot water tap.Supplied with 3 pouring spouts, 2x (2 cups) and 1x (1 cup) and "blind" filter for daily maintenance of the groups.Electronic machines with "volumetric" dosing unit, control keypad with backlit keys (double contact).Unit made of brass (chrome finish), heat guaranteed, with pre-infusion, solenoid valve for each...
%
%
Version for espresso coffee and American coffee (small lifting cup rest grill).Boiler capacity 6.5 litres.1 steam tap, tube and head vaporizing all stainless steel.1 hot water tap, with stainless steel tube.Supplied with 3 pouring spouts, 2x (2 cups) and 1x (1 cup) and "blind" filter for daily maintenance of the groups.Semi-automatic machines, On/Off switch.Unit made of brass (chrome finish), heat guaranteed, with pre-infusion, solenoid valve for each unit.Hot water tap, for tea, herbal teas,...
%
%
Turns/minute: 14000 rpm.Stainless steel cup (900 cl).Shaft with 4 stainless steel knives, ideal for cocktails and sorbets preparation.
%
%
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 6x GN1/1 or 5x 600x400mm.Production per cycle: 30Kg (+70° +3°) and 30Kg (+70° -18°).Chamber size: 505x705xh450mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness....
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
%
Capacity 4x GN 1/1.Recessed dimensions 1415x585. Flat surface, with a slightly raised peripheral edge, allowing better food exposure.Cooling by a coil evaporator (copper), placed just below the plate.Drain 1/2"Control panel with electronic regulation from 0° +8°, digital displayCFC-free expanded polyurethane insulationPredisposed for the placement of an additional thermometer to display the T° on the customer side (On request)Integrated refrigeration unit, refrigerant R290aAutomatic...
%
2 distinct flat surfaces, the upper surface (service side) is placed 70 mm above the first (better visibility of the food)Capacity 4x GN 1/1.Recessed dimensions 1415x585. Flat surfaces, with a slightly raised peripheral edge, allowing for better food exposure.Cooling by means of a coil evaporator (made of copper), placed just below the plate .1/2" drainControl panel (service side) with electronic 0° +8° control, digital displayCFC-free polyurethane foam insulationPredisposed for the placement...
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 6 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R600a, drain for the condensate.Regulation by electronic thermostat (digital), Lighting by "LED". NB Provide discharge (or) a condensate drain pan.
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 8 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R134A, drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Adjustable feet.NB Provide discharge (or) a condensate drain pan.
%
Energy class: C (very important, "HEAVY DUTY" cabinets certified in climate class 5 "40 ° C Temperature - 40% Humidity".Included: 3 grids GN 2/1 (530x650 mm).Refrigerant R290.Delivered with 4 wheels, 2 with brakes.Manufactured in stainless steel, interior AISI 304, exterior AISI 441 (back in treated steel, gray), monocoque frame.Stainless steel rack and slides (anti-tilting), allowing to place the grids as ones pleases.Stamped interior bottom, rounded angles and corners (without...
%
Energy class: D Certified in climate class 4 "30°C Temperature - 55% Humidity"Included: 3 GN 2/1 grids (530x650 mm)Refrigerant R290Reversible door as standardSupplied with 4 wheels, 2 with brakes.Made of stainless steel (food grade), AISI 304 interior, AISI 441 exterior (treated steel rear, grey in colour), monocoque chassisStainless steel racks and slides (antitilt), allowing the grids to be positioned as desiredDeep-drawn inner bottom and rounded corners and angles (without...
%
Plate (670x585mm), with 4 cooking zones (4x 2,25kW)Oven (5,3 kW) GN 2/1 (535x650xh300)Manufactured in stainless steel AISI 304 "stamped top", adjustable feet in steel (150/200mm),version with top, adjustable feet.Cooking surface, watertight "IPX4".Plate (12mm) , cast iron stove, heating resistors in the bottom set automatically.Combustion chamber thermally insulated with glass wool.Control via control switch with 7 positions (for each zone), with indicator light.Oven in stainless steel,...
%
Right panel(s) in "toughened glass".Created for bakery, pastry, snack,...Stainless steel exposition plan AISI 304.Without storeroom.Worktop made of AISI 304 stainless steel.Series intermediary glass, with lighting type LED.Note : Plexiglass gates not included.
%
Right panel(s) in "toughened glass".Created for bakery, pastry, snack,...Stainless steel exposition plan AISI 304.Without storeroom.Worktop made of AISI 304 stainless steel.Series intermediary glass, with lighting type LED.Note : Plexiglass gates not included.
%
- Supplied as standard with 1 stainless steel plate and 1 GN 2/3 grid.- Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel. - T° from 50°C to 270°C, motors with fan (2600 rpm), internal lighting. - Double glazed door, stainless steel handle, gasket on the counter door "easily removable". - Removable inner glass for easy maintenance - Distance between boards 70 mm. - Oura for condensate drainage.
%
Internal dimensions : 2x 380x250xh63 mm.Delivered with 6 tongs. Heating by quartz resistors (2 lower, 2 in the middle and 2 upper).Quartz protection grid.Timer from 0 to 15 minutes, coupled to a control lamp, and selector for use 1 or 2 levels.Extractable bottom bowl.Made in stainless steel AISI 304.Cylinders at the base.Appliances built in compliances with the standards (CE) in force.