%
Production: 10/12 oranges (maximum diameter 70 mm) per minute.Storage capacity: 3 oranges.Loading ramp and recovery tank supplied as standard.Pressure control.Made of "food" materials that do not undergo any alteration in contact with orange juice.Designed for easy maintenance, exterior and interior.Automatic shutdown.
%
- Coffee storage bin capacity 2 kg.- Dosing from 5 to 12 grams.- Grinder Ø 60 mm.- Duration of continuous use 30 min.- Protection level IP 21.Note: acoustic level (80 dB).
%
- Manufactured in massif wood (dark walnut cod. 4), top shelf, two storage levels underneath.- Peripheral plate posing structure (250 mm), tilting downwards.- Refrigerated surface 1280x600 mm, copper evaporator with pipe system, "Dome" in plexiglas, automatic up-and-down movement.- Frame on swivelling castors.
%
Included: 20 pairs of runners (400 x 600 mm).Inner door with heating resistance and under-pressure valve.4 adjustable stainless steel feet.Cooling gas R134.Interior and exterior made of (food) stainless steel AISI 304 (back made of galvanized steel), monocoque frame.Racks and rails in stainless steel (maximal capacity 27 slides, 50-mm spacing), which help to position the trays as one pleases, stamped inside bottom, with drain plug (major maintenance) and rounded angles and corners (without...
%
%
Turns/minute: 14000 rpm.Stainless steel cup (900 cl).Shaft with 4 stainless steel knives, ideal for cocktails and sorbets preparation.
%
%
Realization: panoramic window and 2 sides door in plexiglas.Frame in stainless steel, adjustable feet.A built in humidification system gives a continu temperature without dehydration.Heating system: armoured elements in stainless treated "incoloy", thermostatic regulation 0 till 110°C.Show: trough a GN 1/1 plate 25 mm height, illuminated sign delivered with menu sign.
%
Panoramic window and 2 sides door in plexiglas.Frame in stainless steel, adjustable feet.A built in humidification system gives a continu temperature without dehydration.Heating system: armoured elements in stainless treated incoloy, thermostatic regulation 0 till 110°C.Show: trough a GN 1/1 plate 25 mm height, illuminated sign delivered with menu sign.
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Single-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Included: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
%
Wall-mounted" version with raised rear edgeIncluded: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic...
%
Included: 3 grids (405x460 mm), with slides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
%
Wall-mounted" version with raised rear edge.Included: 3 grids (405x460 mm), with slides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with...
%
%
%
Stainless steel body.Anodized aluminium rollers and rods.Heating surface temperature adjustable by thermostat.Film cutting by means of a low-voltage heated wire.Machine produced in accordance with the actual CE standards.
%
- Turns/minute: rpm 180.- Duration of the production cycle 150-180 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control...
%
%
Production 2400/800 pieces/h.Portions from 50 to 300 gr. "Millimetric" cut check by photocell.Transparant lid with micro-switch.Tank capacity 30 kg, knives and endless screws made of stainless steel.24-V low voltage control panel.Safety micro-switch.Entirely dismountable for an easy maintenance.Outside realization made of "epoxy paint" steel.Delivered with 2 forms CN/45 & CN70, base & pouring funnel for coupling BSL-300A.
%
%
7 pairs of slides EN 600x400 per door provided1 evaporator.4 adjustable stainless steel feet. One-piece structure, back, interior and exterior manufactured in (food) stainless steel.Upper top in stainless steel AISI 304 (removable) thickness (40 mm).Stamped interior bottom, with draining tap (high maintenance), rounded angles (without roughness), (adjustable) stainless steel racks and slides in (L) (65-mm spacing).(Reversible) doors with handle (not visible and not salient), magnetic joint...
%